모노리스 타입 마이크로 촉매 연소기의 담층 내부 물질전달 및 반응 관계에 관한 연구
Investigation on the Relationship between Mass Transfer and Reaction within the Washcoat of Monolith Type Micro-scale Catalytic Combustor
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The relationship between mass transfer and reaction within the washcoat is investigated in a monolith type micro-scale Pt-catalytic combustor. Nondimensionalized balance equation of butane is applied in a simplified washcoat geometry having the shape of slab. Both Thiele modulus and effectiveness factor are considered to compare reaction rate and diffusion rate according to the operation temperature and the diameter of alumina nano-pores. The effect of reaction becomes stronger as the temperature increases, while the effect of diffusion becomes relatively dominant as the diameter of nano-pores increases. From the analysis of butane distribution within the washcoat, design criterion for the thickness of washcoat is discussed.
Abstract
The relationship between mass transfer and reaction within the washcoat is investigated in a monolith type micro-scale Pt-catalytic combustor. Nondimensionalized balance equation of butane is applied in a simplified washcoat geometry having the shape of slab. Both Thiele modulus and effectiveness factor are considered to compare reaction rate and diffusion rate according to the operation temperature and the diameter of alumina nano-pores. The effect of reaction becomes stronger as the temperature increases, while the effect of diffusion becomes relatively dominant as the diameter of nano-pores increases. From the analysis of butane distribution within the washcoat, design criterion for the thickness of washcoat is discussed.
참고문헌 (18)
- J. Vican., "Development of a microreactor as a thermal source for microelectromechanical systems power generation", Proc. Combust. Inst., 29, pp.909~916 (2002)
- X. Wang., "Fabrication of micro-reactors using tape-casting methods", Catal. Letters, 77, pp.173~177 (2001)
- Y. Suzuki., "Development of micro catalytic combustor with Pt", Al2O3 thin films, 2004, pp.47, 522~527
- G. A. Boyarko., "Catalyzed combustion of hydrogen oxygen in platinum tubes for micro-propulsion applications", Proc. Combust. Inst., 30, pp.2481~2488 (2005)
- T. Okamasa., "Micro Catalytic Combustor Using High-Precision Ceramic Tape Casting", J. Micromech., and Microeng., 16(9), pp.S198~S205 (2006)
- 이광구, "마이크로 스케일 연소기의 백금 촉매 반응 모델링과 물질 전달 특성에 대한 연구", 대한기계학회논문집 B, 32(11), pp.870~877 (2008), 대한기계학회
- Y. Ju., "Microscale combustion : Technology development and fundamental research", Prog. Energy Combust. Sci, 37, pp.669~715 (2011)
- D. C. Walther., "Advances and challenges in the development of power-generation systems at small scales", Prog. Energy Combust. Sci, 37, pp.583~610 (2011)
- 이광구, "열 방출률에 대한 마이크로 백금 촉매 연소기의 치수 설계 기준", 한국연소학회지, 19(4), pp.49~55 (2014), 한국연소학회[DOI]
- R. E. Hayes., "The effect of washcoat geometry on mass transfer in monolith reactors", Chem. Eng. Sci., 59, pp.3169~3181 (2004)
- R. E. Hayes., "Calculating effectiveness factors in non-uniform washcoat shapes", Chem. Eng. Sci., 60, pp.2037~2050 (2005)
- R. Prasad., "Catalytic combustion", Catal. Rev. Sci. Eng., 26, pp.1~58 (1984)
- R. Aris., "On shape factors for irregular particles-I", Chem. Eng. Sci., 6, pp.262~268 (1957)
- R. K. Sharma., "Effective diffusion coefficients and tortuosity factors for commercial catalysts", Ind. Eng. Chem. Res., 30(7), pp.1428~1433 (1991)
- D. Papadias., "Simplified method for effectiveness factor calculations in irregular geometries of washcoats", Chem. Eng. Sci., 55, pp.1447~1459 (2000)
- R. E. Hayes., "Evaluating the effective diffusivity of methane in the washcoat of a honeycomb monolith", Appl. Catal. B, 25, pp.93~104 (2000)
- M. Bhattacharya., "Mass-transfer coefficients in washcoated monoliths", AIChE J, 50, pp.2939~2955 (2004)
- S. Y. Joshi., "Overall mass transfer coefficients and controlling regimes in catalytic monoliths", Chem. Eng. Sci., 65, pp.1729~1747 (2010)