급속압축장치에서 탄소 나노입자가 첨가된 연료 액적의 증발 및 연소 특성에 관한 실험적 연구
Experimental Study on Evaporation and Combustion Characteristics of Fuel Droplet with Carbon Nano-Particles in RCM
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Evaporation and combustion characteristics of fuel droplet with carbon nanoparticle were investigated in a rapid compression machine(RCM). RCM is an experimental equipment to simulate one compression stroke of reciprocating engine. Nitrogen was charged into reaction chamber for evaporation experiment, while oxygen was charged for combustion experiment. N990 carbon black and n-heptane were used to synthesize the carbon nanofluids. Surfactant, span80, was used to make synthesis easier. The droplet pictures were taken using a high speed camera with 500 frames per second. Thermocouple, of which tip is 50 μm, was used not only to measure transient bulk temperature, but also to suspend the droplet. Reaction chamber temperature was calculated from pressure data. The evaporation rate of nanofluids was improved compared to pure fuel. The ignition delay was promoted due to the nanoparticle, but the burning rate was decreased.
Abstract
Evaporation and combustion characteristics of fuel droplet with carbon nanoparticle were investigated in a rapid compression machine(RCM). RCM is an experimental equipment to simulate one compression stroke of reciprocating engine. Nitrogen was charged into reaction chamber for evaporation experiment, while oxygen was charged for combustion experiment. N990 carbon black and n-heptane were used to synthesize the carbon nanofluids. Surfactant, span80, was used to make synthesis easier. The droplet pictures were taken using a high speed camera with 500 frames per second. Thermocouple, of which tip is 50 μm, was used not only to measure transient bulk temperature, but also to suspend the droplet. Reaction chamber temperature was calculated from pressure data. The evaporation rate of nanofluids was improved compared to pure fuel. The ignition delay was promoted due to the nanoparticle, but the burning rate was decreased.
참고문헌 (18)
- A.T. Leonid, "Potential explosion hazard of carbonaceous nanoparticles:Explosion parameters of selected materials", Journal of Hazardous Materials, 295, pp.97~103 (2015)
- G. Yanan, "Optical Properties and Radiation-Enhanced Evaporation of Nanofluid Fuels Containing Carbon-Based Nanostructures", Energy Fuels, 26, pp.4224~4230 (2012)
- 임옥택, "급속압축장치를 이용한 HCCI기관에서 층상혼합기에 의한 압력상승률의 저감효과에 대한 연구", 한국자동차공학회 논문집, 18(5), pp.1~8 (2010), 한국자동차공학회
- H. Ghassemi, "Experimental Study on Binary Droplet Combustion at elevated Pressures and Temperature", Combust. Sci. and Tech, 178, pp.1031~1053 (2006)
- D. Segawa, "Transcritical Phenomena of Autoignited Fuel Droplet at High Pressures under Microgravity", Microgravity sci. technol, 17(3) (2005)
- T. Harada, "A numerical investigation of evaporation characteristics of a fuel droplet suspended from a thermocouple", International Journal of Heat and Mass and Transfer, 54, pp.649~655 (2011)
- H.M. Kim, "A single n-heptane droplet behavior in rapid compression machine", International Journal of Heat and Mass Transfer, 69, pp.247~255 (2014)
- H.M. Kim, "Auto-Ignition Characteristics of Single n-Heptane Droplet in a Rapid Compression Machine", Combust. Sci. Technol, 186, pp.912~927 (2014)
- Q. Khan, "An experimental study about the vaporization, ignition and burning of multicomponent fuel droplets at elevated pressures and temperatures", Ph.D, pp.2010
- I. Javed, "Autoignition and combustion characteristics of heptane droplets with the addition of aluminium nanoparticles at elevated temperatures", Combustion and Flame, 162, pp.191~206 (2015)
- C. Zhang, "Preparation and Magnetic Properties of Nanosize Fe-Co-Ni Alloy and Composite Particles by Water-in-Oil Microemul-sions", Nanotechnology and Precision Engineering, 10, pp.36~45 (2012)
- W. Yu, "A review on Nanofluids: Preparation, Stability Mechanisms, and Applications", Journal of nanomaterials, 2012, pp.1~17 (2012)
- Y.J. Hwang, "Production and dispersion stability of nanoparticles in nanofluids", Power Technology, 186, pp.145~153 (2008)
- Kim HM, "Evaporation and Combustion Characteristics of a Single Droplet According to the Operating Conditions of the RCM", Ms.D, pp.2012
- M. Shaker, "Extended Maxwell model for the thermal conductivity of nanofluids that accounts for nonlocal heat transfer", International Journal of Thermal Sciences, 84, pp.260~266 (2014)
- 정만석, "경유와 바이오 디젤 액적의 혼합비율과 크기에 따른 연소특성", 에너지공학, 18(2), pp.101~107 (2009), 한국에너지학회
- G. Xu, "Inverse influence of initial diameter on droplet burning rate in cold and hot ambiences: a thermal action of flame in balance with heat loss", Heat and Mass Transfer, 46, pp.1155~1169 (2003)
- G.S. Jackson, "Observations of soot during droplet combustion at low gravity:heptane and heptane", monochloro alkane mixtures, 1992, pp.35, 2017~2033