동압 신호의 파형-패턴 분석을 통한 연소 진동 진단
Diagnosis of Combustion Instability Using Waveform Pattern of Dynamic Pressure Signal
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study introduces a new concept that can evaluate the combustion status from the waveform patterns of the dynamic pressure signal, and an initial investigation result on the possibility of combustion instability monitoring, by classifying the waveform of time-series discrete dynamic pressure data, measured in a gas turbine combustor. Based on variations in amplitude among four continuously adjacent data points of dynamic pressure, there are 24 waveform patterns that can be classified. These patterns can be further streamlined to derive three representative diagnostic factors. The representative factors tended to converge to the specific values when combustion instability occurred. Furthermore, distinct characteristic value distributions were observed in stable and transitional states, respectively. These results implied that the waveform pattern, newly defined in this study, can be effectively used as a combustion instability diagnostic tool.
Abstract
This study introduces a new concept that can evaluate the combustion status from the waveform patterns of the dynamic pressure signal, and an initial investigation result on the possibility of combustion instability monitoring, by classifying the waveform of time-series discrete dynamic pressure data, measured in a gas turbine combustor. Based on variations in amplitude among four continuously adjacent data points of dynamic pressure, there are 24 waveform patterns that can be classified. These patterns can be further streamlined to derive three representative diagnostic factors. The representative factors tended to converge to the specific values when combustion instability occurred. Furthermore, distinct characteristic value distributions were observed in stable and transitional states, respectively. These results implied that the waveform pattern, newly defined in this study, can be effectively used as a combustion instability diagnostic tool.
참고문헌 (11)
- H. W. Kim, "A Review of Carbon Neutral Gas Turbine Combustion Technology", Journal of The Korean Society of Combustion, 27(2), pp.14~38 (2022)
- D. S. Han, "Doosan Combustion Auto Tuning (DCAT)System for H-Class Gas Turbines", 62th KOSCO Symposium, pp.121~122 (2021)
- V. Panov, "Auto-Tuning of Real-Time Dynamic Gas Turbine Models", Proceedings of ASME Turbo Expo (2014)
- D. Noble, "Investigation into advanced combustion system health monitoring", Proceedings of the ASME Turbo Expo (2019)
- Z. Feng, "Recent advances in time-frequency analysis methods for machinery fault diagnosis: A review with application examples", Mechanical Systems and Signal Processing, 38(1), pp.165~205 (2013)
- D. Noble, "Advanced Gas Tur-bine Combustor Health Monitoring Using Combustion Dynamics Data", 59th ISA POWID, 2016, ~
- W. J. Song, "Temporal kurtosis of dynamic pressure signal as a quantitative measure of combustion instability", Appl. Therm. Eng, 104, pp.577~586 (2016)
- S. P. Joo, "Zerocrossing rate method as an efficient tool for combustion instability diagnosis", Exp. Thermal Fluid Sci, 123 (2021)
- J. W. Choi, "On the observation of the transient behavior of gas turbine combustion instability using the entropy analysis of dynamic pressure", Exp. Therm Fluid Science, pp.115~ (2020)
- J. J. Hwang, "Combustion Characteristics of Axial Fuel Staging Nozzles for Gas Turbine Combustors", J. Korean Soc. Combust, 28(4), pp.21~29 (2023)
- S. K. Choi, "Diagnosis of Comb-ustion Instability in Gas Turbine Combustor Using Auto-Encoder-Based Machine Learning", The KSFM J. Fluid. Machinary, 27(1), pp.49~56 (2024)