2段階 分利工程에 의한 3種 混合플라스틱의 摩擦荷電 靜電選別
Triboelectrostatic Separation of Mixed Three Kinds of Plastics by a Two-stage Separation Process
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
유사비중의 범위에 있는 PVC, PET and PMMA 3종 혼합플라스틱의 마찰하전 정전선별이 2단계 분리공정을 통하여 수행되었다. PVC, PET and PMMA의 재질분리에 있어 효과적인 하전장치의 재질은 Polypropylene(PP) 과 high-impact polystyrene(HIPS) 임을 확인하였다. PP 싸이클론 하전장치를 이용한 1단계 분리공정에서, PVC의 품위와 회수율은 공기속도 10m/s, 전기장의 세기 200kV/m 이상, 분리대위치 +2cm, 상대습도 30% 이하의 조건에서 각각 99.6%와 97.5%로 구하였으며, HIPS 싸이크론 하전장치를 이용한 2단계 분리공정으로부터, 공기속도 10m/s, 전기장의 세기 250 kV/m, 분리대 위치 0cm, 상대습도 40% 이하의 조건에서 PMMA의 품위와 회수율을 각각 97.8%와 95.12%로 구하였다.
Abstract
Triboelectrostatic separation of mixed three kinds of plastics, PVC, PET and PMMA, in the range of similar gravity has been performed through a two-stage separation process. Polypropylene (PP) and high-impact polystyrene (HIPS) were found to be the most effective materials for a tribo-charger in the separation of PVC, PET and PMMA. In the 1st stage using the PP cyclone charger, PVC grade and recovery depended considerably on the air velocity (10 m/s), the relative humidity (<30%), the electric field (>200 kV/m) and the splitter position (+2 cm from the center) in the triboelelctrostatic separator unit. At an optimum condition a PVC grade of 99.6% and a recovery of 97.5% was achieved. In the 2nd stage using the HIPS cyclone charger, a PMMA grade of 98.3% and a recovery of 97.0% was obtained under the conditions of 10m/s air velocity, over 250 kV/m electric field, central splitter position and less than 40% relative humidity.
참고문헌 (24)
- Park, C.H, "PVC removal from mixed plastics by triboelectrostatic separation", (144), pp.470~476 (2007)
- Jeon, H.S, "The development of electrostatic separation technique for recycling of life circles waste plastic", (15), pp.28~36 (2006)
- Stephanharmm T, "Comparison of the recyclability of flame-retarded plastics", (39), pp.6961~6970 (2005)
- Yongkang,H, "Economic Analysis of electronic waste recycling modeling the cost and revenue of a materials recovery facility in California", (40), pp.1672~1680 (2006), 40
- Zhang,S, "Mechanical separation-oriented characterization of electronic scrap", (21), pp.247~269 (1997)
- Marcher,J, "Separation and recycling of wire and cable scrap in the cable industry", pp.106~114 (1984), 17
- Rios, P, "Plastics disassembly versus bulk recycling; engineering design for end-of-life electronics resource recovery", (37), pp.5463~5470 (2003)
- Amelia, L. Craighill, "Lifecycle assessment and economic evaluation of recycling", (17), pp.75~96 (1996)
- Reid, L. W.,, "Plastic incineration versus recycling: a comparison of energy and landfill cost savings", (47), pp.295~302 (1996), Plastic incineration versus recycling
- Yoon, R.H.,, "Recent development in plastics recycling in the U.S." (2002)
- Shent, H, "A review of plastics waste recycling and the flotation of plastics", (25), pp.85~109 (1999)
- Van den Broeka,W.H.A.M, "Plastic material identification with spectroscopic near infrared imaging and artificial neural networks", (361), pp.161~176 (1998)
- Dodbiba,G, "Electrostatic separation of the shredded plastic mixtures using a tribo cyclone", pp.63~92 (2002)
- Lungu,M, "Electrical separation of plastic materials using the triboelectric effect", (17), pp.69~75 (2004)
- Kelly, "The theory of electrostatic separations", pp.33~46 (1989)
- Castle,G. S. P, "Contact charging between insulators", pp.13~20 (1997)
- Park, C.H, "A study on charging properties and triboelectric series of plastic by tribo-charging", (43), pp.560~569 (2006)
- Yanar,D.K, "Electrostatic separation of polymer powders", (35), pp.257~266 (1995)
- I. I. Castle, "Electrostatic separation of plastics for recycling.", (16), pp.91~100 (1998)
- Matsushita, Y, "Electrostatic separation of plastics by friction mixer with rotary blades", (127), pp.33~40 (1999)
- Fujita, T.,, "Processings of 3th International Sym-posium on East Asian Recycling Technology", pp.21~24 (1995)
- Higashiyama, Y, "Triboelectri-fication of plastic particles on a vibrating feeder laminated with a plastic film", (42), pp.63~68 (1997)
- Lowell, "Advances In Physics. 29", pp.947~1023200796 (1980)
- Lowell, "Advances In Physics. 29", pp.947~1023200796 (1980)