太陽光 産業에서 發生하는 Si/SiC 混合物의 燒結特性 硏究
Sintering Characteristics of Si/SiC Mixtures from Si Waste of Solar Cell Industry
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
태양광 산업에서 폐기물로 발생하는 Si/SiC 혼합슬러지를 재활용하는 것은 환경과 경제적인 측면에서 중요하다. 이러한 재활용을위해서 Si/SiC 혼합물의 소결특성을 분석하는 것이 필요하다. 본 연구에서는 SiC함량에 따른 소결특성을 살펴보기 위해서 공기분급기를 이용하여 Si/SiC 혼합물에서 SiC 함량을 변화시켰다. SiC 함량이 변화된 Si/SiC 혼합물에 카본블랙, 점토 및 수산화알루미늄을 첨가하여 소결하였다. Si/SiC 혼합물의 특성분석 및 첨가제 변화에 따른 Si/SiC 혼합물 소결체의 특성변화를 SEM, XRD, 입도분석 및 겉보기 밀도변화를 측정하여 분석하였다. SEM 및 입도분석결과, SiC 95% 시료의 경우에는 원시료 및 SiC 75% 시료와비교하여 1 μm 크기 이하의 미립입자가 크게 감소하여 공기분급을 통한 미세입자 제거가 SiC 함량 제어에 효과가 있음을 확인할수 있었다. 수산화알루미늄을 첨가함에 따라서 β-Cristobalite 가 감소하고 mullite 생성량이 증가하였으며, 카본블랙의 첨가가 소결특성 향상에 영향을 주는 것을 확인하였다.
Abstract
The recycling of the Si/SiC mixture sludge obtained from solar cell industry is very significant, environmentally and economically. The sintering characteristics of Si/SiC mixture sludge was studied for the purpose of recycling. In this study, to understand sintering behavior, SiC content in the Si/SiC mixture was controlled using an air separator. Various Si/SiC mixtures having different SiC contents were sintered using carbon black, clay and aluminum hydroxide as sintering aids. Physical properties of Si/SiC mixture and sintered bodies have been characterized using SEM, XRD, particle size analyzer and apparent density measurement. SEM and particle size analysis result confirmed that the fine particles less than 1 μm decreased or removed more effectively through the air separator in the case of 95% SiC sample compared than the case of 75% SiC sample or original SiC sample. Further, with addition of the Aluminum Hydroxide, β-cristobalite phase gradually decreased while mullite phase gradually increased. The addition of the carbon black improved the sintering characteristics.
참고문헌 (16)
- W. Koch, "Bulk crystal growth and wafering for PV Handbook of Photovoltaic Science and Engineering" (2003), J. Whiley
- Refining and Recycling of Silicon: A review, "Arjan Ciftja", Norwegian university of science and technology, ~ (2008)
- Life Cycle Inventories and Life Cycle Assessments of Photovoltaic Systems, "Vasilis Fthenakis", International Energy Agency, ~, pp.PVPS Task 12, Report T12-02:2011 (2011)
- V. M. Fthenakis, "Photovoltaics: Environmental, Health and Safety Issues and Perspectives", Prog. Photovolt. Res, 8, pp.27~28 (2000)
- T.Y. Wang, "A novel approach for recycling of kerf loss silicon from cutting slurry waste for solar cell applications", Journal of Crystal Growth, 310, pp.3403~3406 (2008)
- T.Y. Wang, "Recovery of silicon from kerf loss slurry waste for photovoltaic applications", 17(3), pp.155~163 (2009)
- I. Lombardi, "High Yield Recycling Process of Silicon Kerf from Diamond Wire Wafering", 24th European Photovoltaic Solar Energy Conference, pp.21~25 (2009)
- Woo Teck Kwon, "Effect of temperature and carbon contents on the synthesis of β-SiC from silicon sludge by direct carbonization method", Materials Science Forum, 724, pp.45~48 (2012)
- Woo Teck Kwon, "A Study on the Synthesis of SiC Powder from the Silicon Sludge of the Photovoltaic Industry", Materials Science Forum, 724, pp.49~52 (2012)
- 정은진, "태양전지 産業에서 排出되는 Si waste로부터 SiC 분말 제조에 관한 硏究", 자원리싸이클링, 19(5), pp.44~49 (2010), 한국자원리싸이클링학회
- T. Kuniaki, "Recycling of sludge containing silicon and reclaimed product thereby Patent number : JP9175851", ~
- Wu YF, "Separation of silicon and silicon carbide using an electrical field", Separation and Purification Technology, 68(1), pp.70~74 (2009)
- Z.H. Huang, "A new sintering additive for silicon carbide ceramic", Ceramic International, 29, pp.13~17 (2003)
- S. Prochazka, "The role of boron and carbon in the sintering of silicon carbide, In Special Ceramics, Vol.6", pp.171~181 (1975)
- Necat Altinkok, "Processing of Al2O3", SiC ceramic cake performs and their liquid Al metal infiltration, 2003, pp.34, 577~582
- V. Viswabaskaran, "Mullitisation behaviour of calcined clay-alumina mixtures", Ceramics International, 29, pp.561~571 (2003)