본문 바로가기
KERD
논문KCI 등재

바잘트 섬유를 혼합한 천연수경성석회 모르타르의 특성

Characteristics of Natural Hydraulic Lime Mortar Mixed with Basalt Fiber

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류자원공학

초록

본 연구에서는 천연수경성석회(NHL) 모르타르에 바잘트 섬유를 혼합하여 섬유혼합에 따른 강도특성을 연구하고자 하였다. 건식및 습식 4가지로하여 혼합방법에 따른 물리적 특성발현을 확인하였으며, 압축강도 및 휨강도 등을 고려하여 강도 특성이 최대로 발현되는 혼합방법 한 가지를 선택하였다. 실험결과 물성 발현은 습식혼합보다 건식혼합에서 더 우수하였으며, 건식혼합 중 바인더(NHL)와 섬유를 pre-mixing 한 후 물과 골재를 순차적으로 혼합하여 섬유의 분산력을 높여주는 혼합방법을 선택하였다. 이후 섬유길이에 따른 물리적 특성 발현성을 확인하였다. 바잘트 섬유 길이에 따른 압축강도 및 휨강도 측정결과, Plain 샘플 대비 섬유 혼합에 따라 압축강도는 감소하는 경향성을 보였으며, 휨강도는 증가하는 경향을 나타내었다. 또한 섬유를 혼합한 샘플 중에서 섬유길이 6 mm일 때 가장 우수한 강도 특성을 나타내었다.

Abstract

In this study, the strength properties of NHL based mortar with blending basalt fiber were investigated. In the first step, it was evaluated that physical properties of NHL based mortar according to mixing method of four types of basalt fiber and then mixing method of one type was selected. As a result of assessment, it showed that the physical properties with mixing method of dry blending were better than that of wet blending and mixing method that basalt fiber pre-mixed with NHL for 5 min in a blender was selected and water and aggregate were finally added. Secondly, the investigation of blending fiber length on the compressive and flexural strength for basalt fiber reinforced NHL based mortars was carried out. The compressive strength was decreased with adding fiber, and the flexural strength was increased more than plain mortar. In the case of adding 6 mm fiber, the compressive and flexural strength were improved more than that of others.

참고문헌 (15)

  1. Parnas, R., "Basalt fiber reinforced polymer composites" (2007), The New England Transportation Consortium
  2. 전상희, "현무암 단섬유로 강화시킨 시멘트 복합재료의 물성", 한국산학기술학회논문지, 10(6), pp.1298~1303 (2009), 한국산학기술학회
  3. Kunal Singha, "A Short Review on Basalt Fiber", International Journal of Textile Science, 1(4), pp.19~28 (2012)
  4. Czigany, T., "Basalt fiber as a reinforcement of polymer composites", Periodica Polytechnica Mechanical Engineering, 49, pp.3~14 (2005)
  5. Choi, Y. W., "The Experimental study on the fluidity properties of mortar using basalt fiber and high volume fly ash", Journal of the Korean Recycled Construction Resources Institute, 2(4), pp.345~353 (2014)
  6. "BS EN 459-1 : 2010 : Building lime, Part 1 : definitions, specifications and conformity criteria", British-Adopted European Standard, UK, ~ (2010)
  7. Harrison, A., "Carbonating and hydraulic mortars" (2005), TecEco Pty. Ltd.
  8. Lawrence, R. M., "A study of carbonation in nonhydraulic lime mortars", pp.2006
  9. Jeon, J. K., "Estimation on the dispersibility and crack resistance of fiber reinforced concrete", Conference of Korea Concrete Institute, pp.745~748 (2007)
  10. 김병일, "비정질강섬유 보강콘크리트 작업성 및 섬유 분산성 비교분석", 자원리싸이클링, 23(4), pp.47~57 (2014), 한국자원리싸이클링학회[DOI]
  11. 최응규, "섬유강화 시멘트복합체에서 목재해면펄프가 섬유분산고착 및 계면구조에 미치는 영향", 대한건축학회논문집 구조계, 20(5), pp.67~74 (2004), 대한건축학회
  12. 박승범, "고로슬래그 미분말이 혼입된 자기충전 및 숏크리트용 ECC의 개발을 위한 시멘트풀 레올로지 제어", 콘크리트학회 논문집, 20(1), pp.67~75 (2008), 한국콘크리트학회
  13. Choi, J. I., "Engineering property of basalt fiber as a reinforcing fiber", Journal of the Korean Recycled Construction Resources Institute, 3(1), pp.84~89 (2015)
  14. 김정수, "슬래그가 첨가된 ECC(Slag-ECC)의 인장성능과 섬유분산 특성", 대한건축학회연합논문집, 12(2), pp.209~216 (2010), 대한건축학회지회연합회
  15. 유기표, "St", BA를 혼입한 폴리머 시멘트 모르타르의 부착강도 및 인장강도 특성, 2014, pp.38(6), 820~826[DOI]

관련 논문AI추천

이 간행물의 다른 논문 (9건)