폐주석산화물로부터 환원공정 및 전해정련을 통한 치과용 고순도 주석 회수
Recovery of Tin with High Purity for Dental Materials from Waste Tin oxide by Reduction and Electro Refining
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
유리생산공정에서 발생하는 요업로 전극봉인 폐주석 산화물로부터 가스환원공정과 전해정련을 통하여 고순도 주석을 회수하기위한 연구를 수행하였다. 메탄가스 환원공정을 통해 99% 순도의 조주석을 회수하고, 불순물을 미량 제어하였다. 주석의 전해정련시전류밀도가 60A/dm 2 이고 전해액의 황산농도가 0.75 mol일 때 99.979%의 고순도 주석이 96.8% 회수되었다. 그리고 전극봉에 포함된 Pb, Sb 등의 독성 불순물 제어가 가능함을 확인하였다.
Abstract
In this study, using electro-refining process and methane gas reduction, we performed studying the recovery of tin with high purity from waste tin oxide had used as a electrode rod of ceramic furnace which occurred during glass production process. We recovered the crude tin of 99% purity from a methane gas reduction process and controlled a little amount of impurities. When the electrolytic refining condition was a current density of 60A/dm 2 and the sulfuric acid concentration of 0.75 mol, 96.8% of recovered tin (99.979% of purity) were recovered during the electrolytic refining. We confirmed that toxic impurities such as Pb, Sb included in electrode rod. could be controlled.
참고문헌 (10)
- Heloisa A Acciari, "Corrosion of dental amalgams: electrochemical study of Ag–Hg, Ag–Sn and Sn–Hg phases", Electrochimica Acta, 46(24), pp.3887~3893 (2004)
- Chao-yong Zhao, "The effect of multiple precipitate types and texture on yield asymmetry in Mg-Sn-Zn(-Al-Na-Ca) alloys", Acta Materialia, 158, pp.1~12 (2016)
- L. C. Tsao, "Effect of Sn addition on the corrosion behavior of Ti–7Cu–Sn cast alloys for biomedical applications", Materials Science and Engineering: C, 46, pp.246~252 (2015)
- V. P. Krasin, "Quantitative evaluation of thermodynamic parameters of Li-Sn alloys related to their use in fusion reactor", Journal of Nuclear Materials, 505, pp.193~199 (2018)
- S. K. Jha, "Microstructural and textural evolution during hot deformation of dilute Zr-Sn alloy", Journal of Nuclear Materials, 482, pp.12~18 (2016)
- J. P. S. Loureiro, "Deuterium retention in tin (Sn) and lithium–tin (Li–Sn) samples exposed to ISTTOK plasmas", Nuclear Materials and Energy, 12, pp.709~713 (2017)
- H. W. Ha, "Design of Reduction Process of SnO2 by CH4 for Efficient Sn Recovery", Scientific Reports, 7, pp.14427~ (2017)
- D. C. Upham, "Catalytic molten metals for the direct conversion of methane to hydrogen and separable carbon", Science, 358, pp.917~921 (2017)
- 이기웅, "폐 솔더 잉곳으로부터 전해정련에 의한 고순도 주석 생산", 자원리싸이클링, 24(2), pp.62~68 (2015), 한국자원리싸이클링학회[DOI]
- C. Y. Zhao, "Microstructure, mechanical and bio-corrosion properties of as-extruded Mg-Sn-Ca alloys", Trans.Nonferrous Met.Soc, 26, pp.1574~1582 (2016)