본문 바로가기
KERD
논문KCI 등재

커피박을 활용한 탄재 혼합 조건에 따른 용강 내 탄소의 농도 및 용해 효율 측정

Measurement of Carbon Concentration and Dissolution Ratio in Molten Steel by the Mixing Conditions of Carbon Materials Using Coffee Grounds

0

조회

0

다운로드

2

인용

0

참고문헌

키워드

주제분류자원공학

초록

철강 산업에 있어서 CO2 배출량 감소는 중요한 이슈이며, CO2 배출 감소를 위해 코크스를 일부 대체할 수 있는 탄재 연료의 연구는 필요하다. 한편, 바이오매스 연료는 고정 탄소를 일부 함유하고 있으며, 반탄화 공정을 통해 연료내 탄소의 함량을 증가시킬 수 있다. 바이오매스연료 중 커피박은 약 55 mass%의 탄소를 함유하고 있으며, 국내에서 연간 약 27만 ton이 매립 또는 소각되고 있다. 또한, 연간 커피 소비량의증가로 인한 재활용 공정에 관한 연구가 필요하다. 본 연구에서는 반탄화 공정을 통한 커피박 내 고정 탄소의 농도에 미치는 온도의 영향을연구하였다. 또한, 반탄화 커피박의 용해 실험을 통해 금속 샘플 내 탄소 농도와 용해 효율에 대한 코크스와 혼합비의 영향을 조사하였다.

Abstract

Reduction of CO2 emissions is an important issue in the steel industry, and the research on carbon materials that can partially replace cokes is necessary to reduce CO2 emissions. Meanwhile, the biomass fuel contains some fixed carbon, and the carbon content in the biomass can be increased by torrefaction. As one of the biomass fuels, coffee grounds contains about 55 mass% of carbon, and its about 270,000 tons are landfilled and incinerated annually in Korea. In addition, research on the recycling process due to the increase in annual coffee consumption is required. In this study, the effect of temperature on the concentration of fixed carbon in coffee grounds was investigated during torrefaction. Moreover, the effects of mixing ratio of torrefied coffee grounds with cokes on the carbon concentration and dissolution efficiency in the metal sample were investigated.

참고문헌 (13)

  1. NASA GISS, "Giss Surface Temperature Analysis, Data. Giss", ~
  2. C. Figures, "Emissions are still rising : ramp up the cuts", Nature, 564, pp.27~30 (2018)
  3. 진태영, "이산화탄소 배출량 분해분석: 산업 및 에너지 소비구조를 중심으로", 환경정책, 28(2), pp.153~182 (2020), 한국환경정책학회[DOI]
  4. C. Xu, "A brief overview of low CO2emission technologies for iron and steel making", Journal of Iron and Steel Research International, 17(3), pp.1~7 (2010)
  5. T. Echterhof, "Review on the Use of Alternative Carbon Sources in EAF Steelmaking", Metals, 11, pp.222~237 (2021)
  6. K. -H. Yoon, "Method of Estimation and Characterization for Coke heat Quantities of Coking coal", Journal of the Korean Institute of Chemical Engineers, 35(4), pp.585~589 (1997)
  7. 김규완, "용강 중 Al 최대 농도에 대한 Al 드로스 장입 조건의 영향: 전기로 공정 내 화학 에너지 향상을 위한 기반 연구", 자원리싸이클링, 28(4), pp.44~50 (2019), 한국자원리싸이클링학회
  8. M. W. Chapman, "Formation of a Mineral Layer during Coke Dissolution into Liquid Iron and Its Influence on the Kinetics of coke dissolution rate", Metallurgical and Material Transaction B, 39, pp.418~430 (2008)
  9. S. I. Mussatto, "A study on chemical constituents and sugars extraction from spent coffee grounds", Carbohydrate Polymers, 83, pp.368~374 (2011)
  10. G. Nam, "Analyses for Current Research Status for the Coffee By-product and for Status of Coffee Wastes in Seoul", Journal of Energy Engineering, 26(4), pp.14~22 (2017)
  11. M. -S. Kim, "Characteristics and recycling of spent coffee grounds", Life Science and Natural Resources Research, 20, pp.59~69 (2012)
  12. 이원준, "바이오매스 고형연료의 반탄화 특성 및 반탄화물의 연소특성에 관한 연구", 유기물자원화, 23(4), pp.86~94 (2015), 유기성자원학회[DOI]
  13. G. Cruz, "Effects of torrefacation on biomass: a thermal and morphological evaluation", Proc. of 14th Brazilian Congress of Thermal Sciences and Engineering, pp.18~22 (2012)

관련 논문AI추천

이 간행물의 다른 논문 (10건)