재활용 산화물로부터 고부가가치 탄화물(맥신) 소재 합성
Synthesis of High Value-added Carbide Materials (MXenes) from Recycled Oxides
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
폐촉매 등 폐자원에 대한 재활용은 대부분 제련 공정을 통해 금속 성분을 침출 및 추출하는 과정이며 금속 성분은 황산염, 질산염과 같은염 형태로 회수된다. 회수된 염에 대한 하소를 통해 염은 산화물로 변화하며 산화물은 환원 과정을 거쳐 금속 혹은 세라믹 소재가 된다. 산화물 환원 과정에서 사용되는 환원제는 수소, 탄소 등이 있으며 환원을 통해 금속 분말이 얻어지게 되는데 재활용된 원소가 전이 금속이고 탄소를 환원제로 사용하는 경우 탄화물 합성이 가능하다. 전이 금속 탄화물의 경우 세라믹 물질임에도 불구하고 금속 결합으로 인해 전도성이우수한 것으로 알려져 있으며 최근 이차원 전이 금속 탄화물인 맥신(MXene)은 전기 전도성뿐 아니라 넓은 표면적이라는 구조적 특징으로인해 전자파 차폐, 이차전지 전극, 수 처리용 소재로 주목받고 있다. 본 연구에서는 폐자원으로부터 고부가가치 맥신 소재를 합성하기 위한공정을 개발하고자 하였으며 결과적으로 폐자원을 원료로 합성된 맥신의 특성을 평가하여 폐자원의 맥신 원료 적용 가능성을 확인하였다.
Abstract
The recycling of waste resources, such as spent catalysts, primarily involves leaching and extracting metal components via smelting. These metal components are then recovered as salts, such as sulfates and nitrates. When crystallization occurs during the calcination of the recovered salts, the salts are converted into oxides, which are then reduced to form metals or ceramic materials. Common reducing agents used in oxide reduction include hydrogen and carbon, and metal powders are obtained upon reduction. Carbide synthesis can occur if the recycled element is a transition metal and carbon is used as the reducing agent. Despite being ceramic materials, transition metal carbides exhibit excellent conductivity owing to their metallic bonding. Recently, MXene, a two-dimensional transition metal carbide, has gained attention for electromagnetic wave shielding, secondary battery electrodes, and water purification owing to its electrical conductivity and large surface area. This study developed a process for synthesizing high-value MXene materials from waste resources. The properties of these MXenes were evaluated to confirm the potential of using waste resources as raw materials for MXenes.
참고문헌 (12)
- Choi I., "Hydrometallurgical processing of spent selective catalytic reduction(SCR)catalyst for recovery of tungsten", Hydrometallurgy, 178, pp.137~145 (2018)
- Moon G., "Desilication of Highly Acidic Titanyl Chloride Solution for the Production of High-Purity Titania Pigment from a Spent Selective Catalytic Reduction Catalyst", Materials Transactions, 60, pp.988~996 (2019)
- Barin I., "Thermochemical data of pure substances", pp.1528~1634 (1997), Wiley
- Gaskell D., "Introduction to the Thermodynamics of Materials", pp.219~264 (2003), Tylor & Francis
- Toth L., "Transition metal carbides and nitrides", pp.11~12 (1971), Academic Press
- Koc R., "Carbothermal Synthesis of Titanium Carbide Using Ultrafine Titania Powders", Journal of Materials Science, 32, pp.3101~3111 (1997)
- Kwon H., "Investigation of the conditions required for the formation of V(C,N) during carburization of vanadium or carbothermal reduction of V2O5 under nitrogen", Ceramics International, 44, pp.2847~2855 (2018)
- Naguib M., "Twodimensional nanocrystals produced by exfoliation of Ti3AlC2", Advanced Materials, 23, pp.4248~4253 (2011)
- Iqbal A., "Effect of Substitutional Oxygen on Properties of Ti3C2Tx MXene Produced Using Recycled TiO2 Source", Small Methods, 7, pp.2201715~ (2023)
- Kwon H., "Effect of Milling on the Carbothermal Reduction of Oxide Mixture for (Ti,W)C-Ni", Materials Transactions, 49, pp.1594~1599 (2008)
- Iqbal A., "Anomalous absorption of electromagnetic waves by 2D transition metal carbonitride Ti3CNTx(MXene)", Science, 369, pp.446~450 (2020)
- VahidMohammadi A., "Two-Dimensional Vanadium Carbide(MXene)as a High-Capacity Cathode Material forRechargeable Aluminum Batteries", ACS Nano, 11, pp.11135~11144 (2017)