제강분진으로부터 습식제련공정에 의한 황산아연의 제조 연구
Study for Manufacturing of Zinc Sulfate from Electric Arc Furnace Dust by Hydrometallrugical Process
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 제강분진으로부터 습식제련을 이용하여 아연을 선택적으로 회수하고 황산아연을 제조하고자 하였다. 제강분진의 성상분석을 통해 기존의 제강분진과 다르게 철의 함유량이 9.9%로 상대적으로 낮고 망간이 19%로 다량 함유되어 있었으며 이에 알맞은 습식제련 공정을 설계하였다. 침출공정에서는 고액비, 온도, 황산 농도별 실험을 통해 1.6M 황산, 20% 고액비, 60℃, 1시간동안 침출하여85%의 아연, 망간을 용해시키고 철은 침출되지 않았다. 망간으로부터 아연을 선택적으로 회수하기 위해 D2EPHA를 사용한 용매추출 공정을 선택하였고 0.8M D2EHPA, 32% 비누화도, O/A 비 2, 향류 3단 추출을 통해 에서 99% 아연을 추출하였으며, 공동 추출된 망간은pH 1.5로 조정한 황산 수용액으로 전량 세정하였다. 최종적으로 1.5M 황산을 이용하여 O/A 비 4, 향류 4단 탈거를 통해 아연을 농축 탈거하였다. 탈거액에는 40g/L의 아연이 함유되어 있었으며 이를 감압증류하여 99.9%의 황산아연 1수화물을 획득하였다.
Abstract
Herein, we selectively recovered Zn and produced ZnSO4 from electric arc furnace dust using a hydrometallurgical process. The analysis of the properties of the electric arc furnace dust revealed that the Fe content (9.9%) was relatively low while the Mn content (19%) was high as compared to the composition of general dust. Therefore, an appropriate hydrometallurgical process was designed based on the properties of the raw materials. In the leaching process involving the use of 1.6 M sulfuric acid and 20% solid-liquid ratio at 60℃ for 1 h, 85% of the Zn and Mn got dissolved while the Fe was not leached. To selectively recover Zn, a solvent extraction process using D2EHPA as the extractant was chosen, and 99% of the Zn was extracted using 0.8 M D2EHPA with 32% saponification and an O/A ratio of 2 using counter-current 3-stage extraction. Mn was entirely scrubbed with an aqueous sulfuric acid solution of pH 1.5. Finally, Zn was concentrated and stripped using 1.5 M sulfuric acid at an O/A ratio of 4 using counter-current 4-stage stripping. The stripping solution contained 40 g/L of Zn, and 99.9% of ZnSO4∙H2O was obtained by vacuum distillation.
참고문헌 (19)
- 손호상, "제강분진의 건식 처리기술 현황", 자원리싸이클링, 27(2), pp.68~76 (2018), 한국자원리싸이클링학회[DOI]
- 손호상, "아연의 제련 및 리사이클링 현황", 자원리싸이클링, 28(5), pp.30~41 (2019), 한국자원리싸이클링학회[DOI]
- 문석민, "전기로 분진 처리 조업의 공정 분석", 자원리싸이클링, 23(1), pp.80~85 (2014), 한국자원리싸이클링학회[DOI]
- 윤재홍, "조산화아연의 정제과정에서 발생된 2차분진으로부터 유용금속원소(Zn, Pb)의 분리회수에 관한 연구", 자원리싸이클링, 30(1), pp.66~76 (2021), 한국자원리싸이클링학회[DOI]
- Jang, W-S., "Hazardous waste recycling industry status and implications ① Electric arc furnace dust : Heavy metal dust as a resources", VIP Report, 617, pp.1~21 (2015)
- Masson, N., "A brief summary of zinc oxide processing methods available for the Bongarádeposit, PBSIM & BFS Consulting Engineering", ZINC ONE RESOURCES INC, 1~11 (2017)
- The recovery of valuable materials and making clean slag from EAF dust, Reosouce Reccling R&D Program Report, "Korea Zinc R&D Center", Ministry of Environment, ~ (2006)
- Olper, M., "The EZINEX process, a new and advanced way for electrowinning from a chlorine solution", World Zinc ’93, AIMM, pp.491~494 (1993)
- "Zinc sulfate ; Features and applications" (2022)[URL]
- Caravaca, C., "Con"siderations about the recycling of EAF flue dust as source for the recovery of valuable metals by hydrometallurgical process", Resources Conserv. Recycl, 10, pp.35~41 (1994)
- Mordogan, M., "Caustic soda leach of electric arc furnace dust", Trans. Eng. Environ. Sci, 23, pp.199~207 (1999)
- Baik, D. S., "Recovery of zinc from electric arc furnace dusts by leaching with aqeous hydrochloric acid, plating of zinc and regeneration of electrolyte", Trans. Inst. Min. Metall. Sect. C: Min. Process. Extr. Metall., 109, pp.C121~C128 (2000)
- Leclerc, N., "Hydrometallurgical recovery of zinc and lead from electric arc furnace dust using mononitrilotriacetate anion and hexahydrated ferric chloride", J. Hazard. Mater, B91, pp.257~270 (2002)
- Cruells, M., "Electric arc furnace flue dusts : characterization and leaching with sulphuric acid", Hydrometallurgy, 31, pp.213~231 (1992)
- Havlik, B., "Pressure lea"ching of EAF dust with sulphuric acid", Erzmetall, 57(2), pp.113~120 (2004)
- 김윤채, "페로망간 集塵粉의 再活用에 관한 硏究", 자원리싸이클링, 21(3), pp.21~27 (2012), 한국자원리싸이클링학회[DOI]
- 하태영, "테르밋 반응을 이용한 페로망간 전기로 분진의 재활용에 관한 연구", 한국응용과학기술학회지, 32(1), pp.23~30 (2015), 한국응용과학기술학회
- Cheng, C. Y., "Purification of synthetic laterite leach solution by solvent extraction using D2EHPA", Hydrometal"lurgy, 56, pp.369~386 (2000)
- Shin, D. J., "A study on Zn recovery from other metals in the spent mixed batteries through a sequence of hydrometallurgical processes", Environ. Technol, 40(26), pp.3512~3522 (2019)