측정오류를 고려한가드밴드 기반 스크리닝 검사방식의 설계
Design of Screening Inspection Procedures Based on Guard Bands Considering Measurement Errors
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose: The purpose of this study is to investigate the design optimization modeling of screening procedures based on the assessment of misclassification errors. Methods: Misclassification errors due to measurement variability are derived for normally distributed quality characteristics. Further, an optimization model for ensuring the level of outgoing quality is proposed and demonstrated through an illustrative example. Results: It is shown that two types of misclassification errors (i.e., false acceptance and false rejection) may be properly compromised through an analytical assessment of measurement errors and an optimization modeling. It is also discussed that a variety of optimization modeling may be enabled based on the derivation of measurement errors. Conclusion: It may be concluded that the design of screening inspection may further be facilitated by including the effect of measurement errors on the performance of screening inspection procedure.
Abstract
Purpose: The purpose of this study is to investigate the design optimization modeling of screening procedures based on the assessment of misclassification errors. Methods: Misclassification errors due to measurement variability are derived for normally distributed quality characteristics. Further, an optimization model for ensuring the level of outgoing quality is proposed and demonstrated through an illustrative example. Results: It is shown that two types of misclassification errors (i.e., false acceptance and false rejection) may be properly compromised through an analytical assessment of measurement errors and an optimization modeling. It is also discussed that a variety of optimization modeling may be enabled based on the derivation of measurement errors. Conclusion: It may be concluded that the design of screening inspection may further be facilitated by including the effect of measurement errors on the performance of screening inspection procedure.
참고문헌 (12)
- Chandra, Jeya, "The Use of Repeated Measurements to Reduce the Effect of Measurement Errors", IIE Transactions, 20, pp.83~87 (1988)
- Chen, Shieh-Liang, "Selection of the Optimal Precision Level and Target Value for a Production Process: The Lower-Specification-Limit Case", IIE Transactions, 28, pp.979~985 (1996)
- Drezner, Zvi, "On the Computation of the Bivariate Normal Integral", Journal of Statistical Computation and Simulation, 35, pp.101~107 (1990)
- Grubbs, Frank A., "On Setting Test Limits Relative To Specification Limits", Industrial Quality Control, 10, pp.15~20 (1954)
- Hooke, Robert, "Direct Search of Numerical and Statistical Problems", Journal of ACM, 8, pp.212~229 (1966)
- Jeong, Seong Hoon, "Optimal Tolerance Design and Optimization for a Pharmaceutical Quality Characteristics", Mathematical Problems in Engineering (2013)
- Kim, Young Jin, "Economic Design of Inspection Procedures Using Guard Band When Measurement Errors Are Present", Applied Mathematical Modelling, 31, pp.805~816 (2007)
- Lin, Chih-Young, "Improvement of a Dimensional Measurement Process Using Taguchi Robust Designs", Quality Engineering, 9, pp.561~573 (1997)
- Mader, Douglas P., "The Economic Impact of Measurement Error", Quality Engineering, 11, pp.563~574 (1999)
- Park, Young-Hyun., "A Study of Quality Costs in a Multicomponent and Low Volume Products Automated Manufacturing System, In Quality Improvement Through Statistical Methods", pp.405~414 (1998)
- Rishi, Swanand, "Guard-Banding Methods – An Overview", Proceedings of AdMET 2012 (2012)
- Tang, Kwei, "Selection of the Optimal Inspection Precision Level for a Complete Inspection Plan", Journal of Quality Technology, 20, pp.153~156 (1988)