선택조립방식의 효율성에 대한 시뮬레이션 검토
A Review on the Effectiveness of Selective Assembly by Simulation
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose: This paper compares the effectiveness of typical selective assembly criteria and suggests the most promising one. Based on the result of a computer simulation, the key issues of selective assembly are examined and the best criterion is recommended from the effectiveness perspective. Methods: Using JAVA program, production of ten thousand units for each pair of components are simulated for selective assembly of the two types. And the number of mismatching and the fraction nonconforming for each criterion are determined. Results: The best match criterion appeared to be most promising from the perspectives of both mismatching and nonconforming problems. Its effectiveness appears to be also good even when the precision of one component is different from that of the other. Conclusion: For designing an optimal method for selective assembly, the best match criterion is recommendable as the base criterion.
Abstract
Purpose: This paper compares the effectiveness of typical selective assembly criteria and suggests the most promising one. Based on the result of a computer simulation, the key issues of selective assembly are examined and the best criterion is recommended from the effectiveness perspective. Methods: Using JAVA program, production of ten thousand units for each pair of components are simulated for selective assembly of the two types. And the number of mismatching and the fraction nonconforming for each criterion are determined. Results: The best match criterion appeared to be most promising from the perspectives of both mismatching and nonconforming problems. Its effectiveness appears to be also good even when the precision of one component is different from that of the other. Conclusion: For designing an optimal method for selective assembly, the best match criterion is recommendable as the base criterion.
참고문헌 (29)
- Arai, T., "A simulation system on assembly accuracy", CIRP Annals –Manufacturing Technology, 41(1), pp.37~40 (1992)
- Babu, J. R., "Tolerance modelling in selective assembly for minimizing linear assembly tolerance variation and assembly cost by using Taguchi and AIS algorithm", International Journal of Advanced Manufacturing Technology, 75, pp.869~881 (2014)
- Babu, J. R., "Modelling in selective assembly with symmetrical interval-based Taguchi loss function for minimizing assembly loss and clearance variation", International Journal of Manufacturing Technology and Management, 29, pp.288~308 (2015)
- Babu, J. R., "Minimizing assembly loss for a complex assembly using Taguchi’s concept in selective assembly", International Journal of Productivity and Quality Management, 15(3), pp.335~356 (2015)
- Boyer, D. E., "Development and investigation of statistical selective assembly", pp.1984
- Boyer, D. E., "Introducing statistical selective assembly –a means of producing high precision assemblies from low precision components", Annual International Industrial Engineering Conference Proceedings, pp.562~570 (1985)
- Burr, I. W, "Some theoretical and practical aspects of tolerances for mating parts", Industrial Quality Control, 15, pp.18~22 (1958)
- Chen, M. S, "Optimizing tolerance allocation for mechanical components correlated by selective assembly", International Journal of Advanced Manufacturing Technology, 12, pp.349~355 (1996)
- Desmond, D., "Simplification of selective assembly", International Journal of Production Research, 1(3), pp.3~18 (1962)
- Fang, X. D., "A new algorithm for minimizing the surplus parts in selective assembly", Computers and Industrial Engineering, 28, pp.341~350 (1995)
- Jeevanantham, A. K., "Selective assembly to minimize clearance variation in complex assemblies using fuzzy evolutionary programming method", ARPN Journal of Engineering and Applied Sciences, 8(4), pp.280~289 (2013)
- Kannan, SM., "A new method in selective assembly to minimize clearance variation for a radial assembly using genetic algorithm", Quality Engineering, 17(4), pp.595~607 (2005)
- Kannan, SM, "A new grouping method to minimize surplus parts in selective assembly for complex assemblies", Int. J. Prod. Res, 39(9), pp.1851~1863 (2001)
- Kannan, SM., "A new grouping method for minimizing the surplus parts in selective assembly", Quality Engineering, 14(1), pp.67~75 (2002)
- Kannan, SM., "Genetic algorithm for minimizing assembly variation in selective assembly", Int. J. Prod. Res, 41(14), pp.3301~3313 (2003)
- Kannan, S. M., "Modelling and analysis of selective assembly using Taguchi’s loss function", Int. J. Prod. Res, 46(15), pp.4309~4330 (2008)
- Kwon, H. M., "An Economic Selective Assembly Procedure for Two Mating Components with Equal Variance", Naval Research Logistics, 46, pp.809~821 (1999)
- Mansoor, E, "Selective assembly –its analysis and applications", International Journal of Production Research, 1(1), pp.13~24 (1961)
- Matsuura, S., "Optimal binning strategies under squared error loss in selective assembly with measurement error", Communications in Statistics-Theory and Methods, 36, pp.2863~2876 (2007)
- Matsuura, S., "Optimal binning strategies under squared error loss in selective assembly with a tolerance constraint", Communications in Statistics-Theory and Methods, 39, pp.592~605 (2010)
- Mease, D., "Selective assembly in manufacturing : statistical issues and optimal binning strategies", Technometrics, 46, pp.165~175 (2004)
- Nelson, W, "The truncated normal distribution –with applications to component sorting", Industrial Quality Control, 24, pp.261~271 (1967)
- Pugh, G. A, "Group formation in selective assembly", SME Ultrtech Conference Proceedings, 2, pp.117~123 (1986)
- Pugh, G. A, "Partitioning for selective assembly", Computers and Industrial Engineering Conference Proceedings, pp.175~179 (1986)
- Pugh, G. A, "Selective assembly with components of dissimilar variance", Computers and Industrial Engineering, 23, pp.487~491 (1992)
- Rabinovich, L. A, "Improving the characteristics in selective assembly", Russian Engineering Journal, 48, pp.54~59 (1968)
- Rabinovich, L. A., "Investigating the rational sorting accuracy for selective assembly of precision units", Russian Engineering Journal, 60(10), pp.50~53 (1980)
- Rubenchik, V. Ya., "Automatic sorting of rings by size prior to selective assembly", Measure Tech, 22(1), pp.71~73 (1979)
- Zhang, Y., "A new selective assembly approach for remanufacturing of mating parts", Proceedings of 40th International Conference on Computers and Industrial Engineering, pp.1~6 (2010)