API 5L X65 배관의 신뢰도 평가를 위한 파열압력 분포 추정에 관한 연구
A Study on the Estimating Burst Pressure Distributions for Reliability Assessment of API 5L X65 Pipes
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Purpose: The purpose of this paper is to present a probability distribution of the burst pressure of API 5L X65 pipes for the reliability assessment of corroded gas pipelines. Methods: Corrosion is a major cause of weakening the residual strength of the pipe. The mean residual strength on the corrosion defect can be obtained using the burst pressure code. However, in order to obtain the pipe reliability, a probability distribution of the burst pressure should be provided. This study is concerned with estimating the burst pressure distribution using Monte Carlo simulation. A response surface method is employed to represent the distribution parameter as a model of the corrosion defect size. Results: The experimental results suggest that the normal or Weibull distribution should be suitable as the probability distribution of the burst pressure. In particular, it was shown that the probability distribution parameters can be well predicted by using the depth and length of the corrosion defect. Conclusion: Given a corrosion defect on the pipe, its corresponding burst pressure distribution can be provided at instant. Subsequently, a reliability assessment of the pipe is conducted as well.
Abstract
Purpose: The purpose of this paper is to present a probability distribution of the burst pressure of API 5L X65 pipes for the reliability assessment of corroded gas pipelines. Methods: Corrosion is a major cause of weakening the residual strength of the pipe. The mean residual strength on the corrosion defect can be obtained using the burst pressure code. However, in order to obtain the pipe reliability, a probability distribution of the burst pressure should be provided. This study is concerned with estimating the burst pressure distribution using Monte Carlo simulation. A response surface method is employed to represent the distribution parameter as a model of the corrosion defect size. Results: The experimental results suggest that the normal or Weibull distribution should be suitable as the probability distribution of the burst pressure. In particular, it was shown that the probability distribution parameters can be well predicted by using the depth and length of the corrosion defect. Conclusion: Given a corrosion defect on the pipe, its corresponding burst pressure distribution can be provided at instant. Subsequently, a reliability assessment of the pipe is conducted as well.
참고문헌 (13)
- Caleyo, F., "A study on the reliability methodology for pipelines with active corrosion defects", International Journal of Pressure Vessels and Piping, 79, pp.77~86 (2002)
- Caleyo, F., "Probability distribution of pitting corrosion depth and rate in underground pipelines: A Monte Carlo study", Corrosion Science, 51, pp.1925~1934 (2009)
- Cosham, A., "Best practice for the assessment of defects in pipelines", Engineering Failure Analysis, 14, pp.1245~1265 (2007)
- "CSA Z662-2007, Oil and Gas Pipeline System", Canadian Standards Association, ~ (2007)
- Dundulis, G., "Integrated failure probability estimation based on structural integrity analysis and failure data: Natural gas pipeline case", Reliability Engineering and System Safety, 156, pp.195~202 (2016)
- Hasan, S., "Probability assessment of burst limit state due to internal corrosion", International Journal of Pressure Vessels and Piping, 89, pp.48~58 (2012)
- "ISO 16708-2006. Reliability-based limit state methods for pipeline transportation systems in petroleum and natural gas industries", International Standard Organization, ~ (2006)
- 김성준, "인더스트리 4.0을 위한 고장예지 기술과 가스배관의 사용적합성 평가", 품질경영학회지, 45(4), pp.649~664 (2017), 한국품질경영학회[DOI]
- 김성준, "부식기반 복합고장을 고려한 가스배관의 신뢰도 평가", 품질경영학회지, 47(4), pp.739~754 (2019), 한국품질경영학회[DOI]
- 김상익, "품질경영학회 50주년 특별호: 실험계획법 분야 연구 리뷰", 품질경영학회지, 44(2), pp.245~264 (2016), 한국품질경영학회[DOI]
- Ossai, C., "Pipeline failures in corrosive environments – A conceptual analysis of trends and effects", Engineering Failure Analysis, 53, pp.36~58 (2015)
- Qian, G., "Effect of correlated input parameters on the failure probability of pipelines with corrosion defects by using FITNET FFS procedure", International Journal of Pressure Vessels and Piping, 105, pp.1~10 (2013)
- Zhang, P., "Failure probability of corroded pipeline considering the correlation of random variables", Engineering Failure Analysis, 99, pp.34~45 (2019)