다양한 성형압력조건에서 제조된 입상 세라믹필터의 집진성능
Filtration performance of granular ceramic filters produced at various molding pressures
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A silicon carbide (SiC) ceramic filter is an effective component for hot flue gas cleaning because of its high collection efficiency, high thermal shock resistance, and excellent mechanical strength. The effect of molding pressure in the production of SiC granular ceramic filters, on the mechanical strength and filtration performance, was investigated in this work. It was found that the ceramic filters produced at molding pressures less than 20 MPa have low mechanical strength and that this result was caused by weak physical interaction among the ceramic powders due to defects and cracks. On the other hand, the filter quality factor(), which represents filtration performance of filter media, decreased with increasing the molding pressure due to the drastic increase in pressure drop. Ceramic filter performance factor(), which is the manipulation of maximum mechanical strength and , was introduced to consider both mechanical strength and filtration performance in this study. As a result, molding pressure of 30 MPa was desirable to produce a SiC granular ceramic filter based on qFM.
Abstract
A silicon carbide (SiC) ceramic filter is an effective component for hot flue gas cleaning because of its high collection efficiency, high thermal shock resistance, and excellent mechanical strength. The effect of molding pressure in the production of SiC granular ceramic filters, on the mechanical strength and filtration performance, was investigated in this work. It was found that the ceramic filters produced at molding pressures less than 20 MPa have low mechanical strength and that this result was caused by weak physical interaction among the ceramic powders due to defects and cracks. On the other hand, the filter quality factor(), which represents filtration performance of filter media, decreased with increasing the molding pressure due to the drastic increase in pressure drop. Ceramic filter performance factor(), which is the manipulation of maximum mechanical strength and , was introduced to consider both mechanical strength and filtration performance in this study. As a result, molding pressure of 30 MPa was desirable to produce a SiC granular ceramic filter based on qFM.
참고문헌 (25)
- Allen, M. D., "Slip correction measurement of spherical solid aerosol particles in an improved millikan apparatus", Aerosol Sci. Technol, 4, pp.269~286 (1985)[DOI]
- Chi, H., "Experimental investigation of dust deposit within ceramic filter medium during filtration-cleaning cycles", Chin. J. Chem. Eng, 17, pp.219~225 (2009)[DOI]
- Choi, H. -J., "Preparation of granular ceramic filter and prediction of its collection efficiency", Aerosol Sci. Technol, 48, pp.1070~1079 (2014)[DOI]
- Choi, H. -J., "Effect of sintering temperature in preparation of granular ceramic filter", Ceram. Int, 41, pp.10030~10037 (2015)[DOI]
- De Freitas, N. L., "Development of a double-layered ceramic filter for aerosol filtration at high temperature : The filter collection efficiency", J. Hazard. Mater, 136, pp.747~756 (2006)[DOI]
- D’Ottavio, T., "Aerosol capture in granular beds in the impaction dominated regime", Aerosol Sci. Technol, 2, pp.91~108 (1982)[DOI]
- brahimpour, O., "Novel fabrication route for porous silicon carbide ceramics through the combination of in situ polymerization and reaction bonding techniques", J. Appl. Polym. Sci, 131, pp.40425~ (2014)[DOI]
- Endo, Y., "Collection efficiency of sintered ceramic filters made of submicron spheres", Filtr. Sep, 39, pp.42~47 (2002)[DOI]
- Gal, E., "A study of inertial effects in granular bed filtration", AIChE J, 31, pp.1093~1104 (1985)[DOI]
- Han, Y. S., "Fabrication of biomodal porous alumina ceramics", Mater. Res. Bull, 38, pp.373~379 (2003)[DOI]
- Hata, M., "Observation of dust release behavior from ceramic filter element", Adv. Powder Technol, 14, pp.719~734 (2003)[DOI]
- Jung, Y., "Experimental determination of the initial collection efficiency of granular beds in the inertial-impaction-dominated region", Aerosol Sci. Technol, 11, pp.168~182 (1989)[DOI]
- Kanaoka, C., "Effect of filter permeability on the release of captured dust from a rigid ceramic filter surface", Powder Technol, 118, pp.113~120 (2001)[DOI]
- Kuo, Y. -M., "Filtration and loading characteristics of granular bed filters", J. Aerosol Sci, 41, pp.223~229 (2010)[DOI]
- Li, J., "Factors that influence the flexural strength of SiC-based porous ceramics used for hot gas filter support", European Ceram. Soc, 31, pp.825~831 (2011)[DOI]
- Liu, S., "Fabrication and characterization of cordierite-bonded porous SiC ceramic", Ceram. Int, 35, pp.597~602 (2009)[DOI]
- Omori, Y., "Experimental evidence of a strong image force between highly charged electrosprayed molecular ions and a metal screen", Aerosol Air Qual. Res, 16, pp.3055~3062 (2016)[DOI]
- Paretsky, L., "Panel bed filters for simultaneous removal of fly ash and sulfur dioxide: Ⅱ. Filtration of dilute aerosols by sand beds", J. Air Pollut. Control Assoc., 21, pp.204~209 (1971)[DOI]
- Pastila, P., "Environmental effects on microstructure and strength of SiC-based hot gas filters", J. European Ceram. Soc, 21, pp.1261~1268 (2001)[DOI]
- She, J., "High-Strength porous silicon carbide ceramics by an oxidation-bonding technique", J. Am. Ceram. Soc, 85, pp.2852~2854 (2002)[DOI]
- She, J. H., "Oxidation bonding of porous silicon carbide ceramics with synergistic performance", J. European Ceram. Soc, 24, pp.331~334 (2004)[DOI]
- Simeone, E., "Filtration performance at high temperatures and analysis of ceramic filter elements during biomass gasification", Biomass Bioenerg, 35, pp.S87~S104 (2011)[DOI]
- Tien, C., "Granular filtration of aerosols and hydrosols" (1989), Butterworths-Heinemann
- Wen, Z. -H., "Preparation of porous ceramics with controllable pore sized in an easy and low-cost way", Materials Characterization, 59, pp.1335~1338 (2008)[DOI]
- Zhong, Z., "Removal of organic aerosols from furnace flue gas by ceramic filters", Ind. Eng. Chem. Res, 52, pp.5455~5461 (2013)[DOI]