오토인코더를 이용한 열간 조압연설비 상태모니터링과 진단
Condition Monitoring and Diagnosis of a Hot Strip Roughing Mill Using an Autoencoder
0
조회
0
다운로드
12
인용
0
참고문헌
키워드
초록
Purpose: It is essential for the steel industry to produce steel products without unexpected downtime to reduce costs and produce high quality products. A hot strip rolling mill consists of many mechanical and electrical units. In condition monitoring and diagnosis, various units could fail for unknown reasons. Methods: In this study, we propose an effective method to detect units with abnormal status early to minimize system downtime. The early warning problem with various units was first defined. An autoencoder was modeled to detect abnormal states. An application of the proposed method was also implemented in a simulated field-data analysis. Results: We can compare images of original data and reconstructed images, as well as visually identify differences between original and reconstruction images. We confirmed that normal and abnormal states can be distinguished by reconstruction error of autoencoder. Experimental results show the possibility of prediction due to the increase of reconstruction error from just before equipment failure. Conclusion: In this paper, hot strip roughing mill monitoring method using autoencoder is proposed and experiments are performed to study the benefit of the autoencoder.
Abstract
Purpose: It is essential for the steel industry to produce steel products without unexpected downtime to reduce costs and produce high quality products. A hot strip rolling mill consists of many mechanical and electrical units. In condition monitoring and diagnosis, various units could fail for unknown reasons. Methods: In this study, we propose an effective method to detect units with abnormal status early to minimize system downtime. The early warning problem with various units was first defined. An autoencoder was modeled to detect abnormal states. An application of the proposed method was also implemented in a simulated field-data analysis. Results: We can compare images of original data and reconstructed images, as well as visually identify differences between original and reconstruction images. We confirmed that normal and abnormal states can be distinguished by reconstruction error of autoencoder. Experimental results show the possibility of prediction due to the increase of reconstruction error from just before equipment failure. Conclusion: In this paper, hot strip roughing mill monitoring method using autoencoder is proposed and experiments are performed to study the benefit of the autoencoder.
참고문헌 (16)
- Ahmad, S., "Unsupervised real-time anomaly detection for streaming data", Neurocomputing, 262(1), pp.134~147 (2017)
- Choi. J. H, "Introduction of Prognostics and Health Management", Journal of the Korean Society of Mechanical Engineers, 53(7), pp.26~34 (2013)
- Devika, U. K., "Comparison Study among Various Anomaly Detection Techniques", Journal of Research in Computer and Communication Technology, 3(3), pp.121~124 (2014)
- Farina, M., "Fault Detection and Isolation of Bearings in a Drive Reducer of a Hot Steel Rolling Mill", Control Engineering Practice, 39, pp.35~44 (2015)
- Hansson, K., "Machine Learning Algorithms in Heavy Process Manufacturing", American Journal of Intelligent Systems, 6(1), pp.1~13 (2016)
- Hu, Y., "Deep Health Indicator Extraction: A Method Based on Auto-encoders and Extreme Learning Machines", Annual Conference of the Prognostics and Health Management Society, pp.1~7 (2016)
- Kumar, S., "Approach to Fault Identification for Electronic Products Using Mahalanobis Distance", IEEE Transactions on Instrumentation and Measurement, 59(8), pp.20552064~ (2010)
- Lee, S. H., "Industry 4. 0 and Direction of Failure Prediction and Health Management Technology(PHM)", Journal of the Korean Society for Noise and Vibration Engineering, 25(1), pp.22~28 (2015)
- Omar, S., "Machine Learning Techniques for Anomaly Detection : An overview", International Journal of Computer Applications, 79(2), pp.33~41 (2013)
- Sarkar, S., "Deep Learning for Structural Health Monitoring: A damage characterization application", Annual Conference of the Prognostics and Health Management Society, pp.176~182 (2016)
- 서명교, "군집기반 열간조압연설비 상태모니터링과 진단", 품질경영학회지, 45(1), pp.25~38 (2017), 한국품질경영학회[DOI]
- Verdier, G., "Adaptive Mahalanobis Distance and k-Nearest Neighbor Rule for Fault Detection in Semiconductor Manufacturing", IEEE Transactions Semiconductor Manufacturing, 24(1), pp.59~68 (2011)
- Vincent, P., "Stacked Denoising Autoencoders : Learning Useful Representations in a Deep Network with a Local Denoising Criterion", The Journal of Machine Learning Research, 11(3), pp.3371~3408 (2010)
- Yacout, S., "Fault Detection and Diagnosis for Condition Based Maintenance Using the Logical Analysis of Data", Computers and Industrial Engineering(CIE) 2010 40th International Conference, pp.1~6 (2010)
- Zhou, Y., "Data Driven Injection Molding Process Monitoring Using Sparse Autoencoder Technique", IEEE International Conference on Advanced Intelligent Mechatronics(AIM), pp.524~528 (2015)
- Zhu, H. J., "Fault Diagnosis of Hydraulic Pump Based on Stacked Autoencoders", IEEE 12th International Conference on Electronic Measurement & Instruments, pp.58~62 (2015)