군용장갑차 및 자주포용 송풍기의 내구수명 향상에 대한 연구
A Study on Durability Life Improvement of Blower for Military Armored Vehicle and Self-propelled Artillery
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Purpose: A main purpose is to increase the operational rate and reduce operating maintenance costs by Improving the durability of Blower of Military Armored Vehicle and Self-propelled Artillery. As a result, it is expected to improve the service quality of customers. Methods: After analyzing the cause of the stop of the blower, the improvement plans were established and the effectiveness of each improvement plans were verified by testing. Results: Mechanical, electrical and environmental factors affecting brush wear were reviewed, but it was difficult to specify the cause, which necessitated a review of the application of the BLDC motor. Conclusion: After applying the BLDC motor to the blower, tests proved that the existing blower can be replaced. It is expected that this study will help improve the durability life of similar equipment that is applied with Brushed DC motors as well as blowers.
Abstract
Purpose: A main purpose is to increase the operational rate and reduce operating maintenance costs by Improving the durability of Blower of Military Armored Vehicle and Self-propelled Artillery. As a result, it is expected to improve the service quality of customers. Methods: After analyzing the cause of the stop of the blower, the improvement plans were established and the effectiveness of each improvement plans were verified by testing. Results: Mechanical, electrical and environmental factors affecting brush wear were reviewed, but it was difficult to specify the cause, which necessitated a review of the application of the BLDC motor. Conclusion: After applying the BLDC motor to the blower, tests proved that the existing blower can be replaced. It is expected that this study will help improve the durability life of similar equipment that is applied with Brushed DC motors as well as blowers.
참고문헌 (17)
- Department of Defense, "CHARACTERISTICS OF 28 VOLT DC INPUT POWER TO UTILIZATION EQUIPMENT IN MILITARY VEHICLE", MIL-STD-1275D, ~ (2006)
- Department of Defense, "REQUIREMENTS FOR THE CONTROL OF ELECTOMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT", MIL-STD-461F, ~ (2007)
- Department of Defense, "ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS", MIL-STD-810G, ~ (2008)
- 엄학용, "산업용 청소기 모터의 가속수명시험", 신뢰성 응용연구, 18(3), pp.193~200 (2018), 한국신뢰성학회[DOI]
- 강보식, "축열조 캡슐 고장원인 분석과 수명시험 모드 결정에 관한 연구", 신뢰성 응용연구, 18(3), pp.260~270 (2018), 한국신뢰성학회[DOI]
- Kim, Jung-Yul, "Correlation Analysis Carbon Brush Wear and Blower DC Motor Performance and the Estimation of Brush Life by Regression Analysis", The Korean Society of Mechanical Engineers, Spring and Autumn conference, pp.2026~2030 (2010)
- 김성안, "개선된 12 스텝 제어를 고려한 브러시리스 DC 전동기의성능 향상을 위한 최적화 설계", 전기전자학회논문지, 23(1), pp.9~13 (2019), 한국전기전자학회[DOI]
- 김성훈, "Kano 모델 기반의 기업규모별 국방품질보증 서비스품질에 관한 연구", 품질경영학회지, 46(3), pp.397~410 (2018), 한국품질경영학회[DOI]
- Korea Dictionary Research Publishing, "Quality" (1995), MECHANICAL ENGINEERING GLOSSARY
- The Development Report of Dust Extractor Blower Motor for K1A1 MBT, "Lee, Hakyong", DTaQ, ~, pp.DTaQ-07-1367-D (2007)
- 이상종, "전륜 Insulator 이음 개선을 위한 강건 구조 방안 연구", 신뢰성 응용연구, 17(3), pp.197~206 (2017), 한국신뢰성학회
- 서현수, "Kano 모델과 PCSI 지수 이용한 국방품질보증 서비스품질에 관한 연구", 품질경영학회지, 45(2), pp.261~274 (2017), 한국품질경영학회[DOI]
- 신재식, "대형 상용 엔진에서 SCR의 클리닝 주기 선정 및 저감효율에 따른 내구신뢰성 특성 연구", 신뢰성 응용연구, 18(1), pp.66~71 (2018), 한국신뢰성학회[DOI]
- Shin, Wae Gyeong, "A Study on Brush Wear Analysis for Life Prediction of Brush type DC Motors", doctor, pp.2010
- Shin, Wae Gyeong, "A Study on the Life Cycle Characteristics of Brush-type DC Motor for Automobiles", The Korean Society of Mechanical Engineers, Spring and Autumn conference, pp.98~99 (2018)
- 윤효진, "고온 환경에서의 전투차량용 BLDC 모터신뢰성 향상에 관한 연구", 한국기계가공학회지, 17(5), pp.97~102 (2018), 한국기계가공학회[DOI]
- 주학림, "H-infinity Loop Shaping 방법을 이용한 BLDC 전동기 핀 위치제어시스템 제어기 설계", 전력전자학회 논문지, 24(1), pp.49~55 (2019), 전력전자학회[DOI]