다품종 소량생산 설비의 총괄생산계획에 관한 사례 연구: 시스템다이내믹스 시뮬레이션 모델링을 중심으로
A Case Study on the Aggregate Planning of Multi-product Small-batch Production Facilities: Focusing on System Dynamics Simulation Modeling
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose: The purpose of this study is to guide the operation managers who plan daily production of large mass-processing facility that services multi-customers with multi-product, small-batch item characteristics by providing the practical best production quantity and the inventory allowed to build. Methods: Close observation of a subcontract paint-shop operator captured the daily decision process which was reflected in the subcontractor-unique mathematical model and the system dynamics simulation model. Multiple simulations were run to find the practical best production quantity and the maximum allowable size of inventory that did not undermine the profit from practical best daily production. Actual data and a few constant values were obtained from the firm under study. Results: While the inventory holding cost for the customer-owned material harms the total profit of the subcontractor, the running cost of the processing facility hinders production in small batches. This balances the maximum possible productions and results in practical best daily production which can be found through simulation runs with actual data. The maximum inventory allowable was deduced from the practical best daily production. Conclusion: To build a large volume that enables economy-of-scale production, operators should deal with multi-product small-batch items from multiple customers. When the planned schedule of the time and amount of material in-flow tend not to be reliable, operators can find it practical to execute level production across the planning horizon instead of adjusting to day-to-day in-flow fluctuations.
Abstract
Purpose: The purpose of this study is to guide the operation managers who plan daily production of large mass-processing facility that services multi-customers with multi-product, small-batch item characteristics by providing the practical best production quantity and the inventory allowed to build. Methods: Close observation of a subcontract paint-shop operator captured the daily decision process which was reflected in the subcontractor-unique mathematical model and the system dynamics simulation model. Multiple simulations were run to find the practical best production quantity and the maximum allowable size of inventory that did not undermine the profit from practical best daily production. Actual data and a few constant values were obtained from the firm under study. Results: While the inventory holding cost for the customer-owned material harms the total profit of the subcontractor, the running cost of the processing facility hinders production in small batches. This balances the maximum possible productions and results in practical best daily production which can be found through simulation runs with actual data. The maximum inventory allowable was deduced from the practical best daily production. Conclusion: To build a large volume that enables economy-of-scale production, operators should deal with multi-product small-batch items from multiple customers. When the planned schedule of the time and amount of material in-flow tend not to be reliable, operators can find it practical to execute level production across the planning horizon instead of adjusting to day-to-day in-flow fluctuations.
참고문헌 (20)
- Aouam T, "Integrated production planning and order acceptance under uncertainty : A robust optimization approach", European Journal of Operational Research, 228(3), pp.504~515 (2013)
- APICS, "Apics dictionary" (2002)
- Berry WL, "Manufacturing flexibility : Methods for measuring the impact of product variety on performance in process industries", Journal of Operations Management, 17(2), pp.163~178 (1999)
- Bersch CV, "Strategic planning of new product introductions : Integrated planning of products and modules in the automotive industry", Omega, 105, pp.102515~ (2021)
- Betts JM, "Just-in-time component replenishment decisions for assemble-to-order manufacturing under capital constraint and stochastic demand", International Journal of Production Economics, 95(1), pp.51~70 (2005)
- 정혜란, "4차 산업혁명시대의 스마트 팩토리 구축을 위한 품질전략", 품질경영학회지, 48(1), pp.87~105 (2020), 한국품질경영학회[DOI]
- Djordjevic I, "A fuzzy linear programming model for aggregated production planning(app)in the automotive industry", Computers in Industry, 110, pp.48~63 (2019)
- Filho MG, "The effect of shop floor continuous improvement programs on the lot size–cycle time relationship in a multi-product single-machine environment", International Journal of Advanced Manufacturing Technology, 52(5-8), pp.669~681 (2010)
- Forrester JW, "Industrial dynamics – a major breakthrough for decision makers", Harvard Business Review, 36(4), pp.37~66 (1958)
- 하지영, "스마트온실 경영체의 경영 효율성 및 영향요인 분석 - 전라권 딸기 재배 경영체를 중심으로-", 품질경영학회지, 49(2), pp.213~231 (2021), 한국품질경영학회[DOI]
- Hopp JW, "Factory physics : Foundations of manufacturing management" (2000)
- 강선민, "수·위탁기업의 경영성과 분석 : 조선, 자동차, 전기전자의 거래관계를 고려하여", 대한경영학회지, 25(4), pp.2157~2183 (2012), 대한경영학회[DOI]
- 곽수일, "인터넷 쇼핑몰의 서비스 품질에 대한 동태적 자원배분 의사결정", 품질경영학회지, 33(4), pp.21~41 (2005), 한국품질경영학회
- 이철우, "제조업과 서비스업 품질관리 종사원들의 조직문화 개선에 관한 연구 : 직무만족의 매개변수를 중심으로", 품질경영학회지, 48(1), pp.29~50 (2020), 한국품질경영학회[DOI]
- Lee HC, "Parallel machine scheduling for small-size batch production with sequence dependent setup times larger than processing times", Journal of the Korean Society of Supply Chain Management, 4, pp.35~43 (2004)
- Pound ES, "Factory physics for managers: How leaders improve performance in a post–lean six sigma world" (2014), McGraw-Hill Education
- Salamati-Hormozi H, "Trade-offbetween the costs and the fairness for a collaborative production planning problem in make-to-order manufacturing", Computers & Industrial Engineering, 126, pp.421~434 (2018)
- 서창수, "중소기업의 생산성 성과 요인에 관한 구조적 분석: 생산성경영시스템(PMS) 인증 제조업을 중심으로", 품질경영학회지, 47(2), pp.295~314 (2019), 한국품질경영학회[DOI]
- Sterman J, "System dynamics perspectives and modeling opportunities for research in operations management", Journal of Operations Management, 39(40), pp.1~5 (2015)
- Wong J-T, "Stochastic dynamic lot-sizing problem using bi-level programming base on artificial intelligence techniques", Applied Mathematical Modelling, 36(5), pp.2003~2016 (2012)