철 함침 낙엽 Biochar에 의한 음이온성 염료의 흡착특성
Adsorption Characteristics of Anionic Dye by Fe-Decorated Biochar Derived from Fallen Leaves
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
BACKGROUND: There is a need for a revolutionary method to overcome the problem of biochar, which has relatively low adsorption capacity for existing anion pollutants, along with collectively recycling fallen leaves, a kind of forest by-product. Therefore, the objective of this study was to prepare iron-decorated biochar derived from fallen leaves (Fe-FLB), and to evaluate their adsorption properties to Congo red (CR) as anionic dye. METHODS AND RESULTS: The adsorption properties of CR by fallen leaves biochar (FLB) and Fe-FLB were performed under various conditions such as initial CR concentration, reaction time, pH and dosage with isotherm and kinetic models. In this study, Fe-FLB prepared through iron impregnation and pyrolysis of fallen leaves contained 56.9% carbon and 6.3% iron. Congo red adsorption by FLB and Fe-FLB was well described by Langmuir model and pseudo second order model and the maximum adsorption capacities of FLB and Fe-FLB were 1.1 mg/g and 25.6 mg/g, respectively. In particular, it was found that the adsorption of CR was occurred by chemical adsorption process by the outer boundary layer of Fe-FLB. CONCLUSION: Overall, the production of Fe-FLB using fallen leaves and using it as an anion adsorbent is considered to be a way to overcome the problem of biochar with relatively low anion adsorption in addition to the reduction effect of waste.
Abstract
BACKGROUND: There is a need for a revolutionary method to overcome the problem of biochar, which has relatively low adsorption capacity for existing anion pollutants, along with collectively recycling fallen leaves, a kind of forest by-product. Therefore, the objective of this study was to prepare iron-decorated biochar derived from fallen leaves (Fe-FLB), and to evaluate their adsorption properties to Congo red (CR) as anionic dye. METHODS AND RESULTS: The adsorption properties of CR by fallen leaves biochar (FLB) and Fe-FLB were performed under various conditions such as initial CR concentration, reaction time, pH and dosage with isotherm and kinetic models. In this study, Fe-FLB prepared through iron impregnation and pyrolysis of fallen leaves contained 56.9% carbon and 6.3% iron. Congo red adsorption by FLB and Fe-FLB was well described by Langmuir model and pseudo second order model and the maximum adsorption capacities of FLB and Fe-FLB were 1.1 mg/g and 25.6 mg/g, respectively. In particular, it was found that the adsorption of CR was occurred by chemical adsorption process by the outer boundary layer of Fe-FLB. CONCLUSION: Overall, the production of Fe-FLB using fallen leaves and using it as an anion adsorbent is considered to be a way to overcome the problem of biochar with relatively low anion adsorption in addition to the reduction effect of waste.
참고문헌 (25)
- Khandelwal H, "Application of life cycle assessment in municipal solid waste management: A worldwide critical review", Journal of Cleaner Production, 209, pp.630~654 (2019)[DOI]
- 김동섭, "낙엽 기반 펠릿의 특성 변화 연구", 펄프종이기술, 50(3), pp.12~18 (2018), 한국펄프·종이공학회[DOI]
- Cu L, "Co-hydrothermal treatment of fallen leaves with iron sludge to prepare magnetic iron product and solid fuel", Bioresource Technology, 257, pp.229~237 (2018)[DOI]
- Katami T, "Formation of dioxins from incineration of fallen leaf", Bulletin of Environmental Contamination and Toxicology, 72, pp.114~118 (2004)[DOI]
- Agegnehu G, "Benefits of biochar, compost and biochar-compost for soil quality, maize yield, and greenhouse gas emission in a tropical agricultural soil", Science of The Total Environment, 543, pp.295~306 (2016)[DOI]
- Tan G, "Sorption of mercury (II) and atrazine by biochar, modified biochars and biochar based activated carbon in aqueous solution", Bioresource Technology, 211, pp.727~735 (2016)[DOI]
- Ahmad M, "Biochar as a sorbent for contaminant management in soil and water: A review", Chemosphere, 99, pp.19~23 (2014)[DOI]
- Yang Y, "Chromium removal using a magnetic corncob biochar", polypyrrole composite by adsorption combined with reduction: Reaction pathway and contribution degree, 2018, pp.556, 201~209
- Li H, "Enhancing phosphate adsorption by Mg", Al layered double hydroxide functionalized biochar with different Mg, Science of The Total Environment, pp.2016, 559[DOI]
- Rechberger MV, "Change in biochar physical and chemical properties:Accelerated biochar aging in an acidic soil", Carbon, 115, pp.209~219 (2017)[DOI]
- Uddin MK, "A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade", Chemical Engineering Journal, 308, pp.438~462 (2017)[DOI]
- Park JH, "Degradation of Orange G by Fenton-like reaction with Fe-impregnated biochar catalyst", Bioresource Technology, 249, pp.368~376 (2018)[DOI]
- Dantas TLP, "Treatment of textile wastewater by heterogeneous Fenton process using a new composite Fe2O3", carbon, 2006, pp.118, 77~82
- Kyzas GZ, "Activated carbons produced by pyrolysis of waste potato peels:Cobalt ions removal by adsorption", Colloids and Surface A: Physicochemical and Engineering Aspects, 490, pp.74~83 (2016)[DOI]
- Keiluweit M, "Dynamic molecular structure of plant biomass-derived black carbon (biochar)", Environmental Science and Technology, 44, pp.1247~1253 (2010)[DOI]
- Yan J, "Biochar supported nanoscale zerobalent iron composite used as persulfate activator for trichloroethylene", Bioresource Technology, 15, pp.269~274 (2015)[DOI]
- Kumar A, "Facile hetero-assembly of superaramagnetic Fe3O4", BiVO4 stacked on biochar for solar photo-degradation of methyl paraben and pesticide removal from soil, 2017, pp.337, 118~131
- Ifthikar J, "Highly efficient lead distribution by magnetic sewage sludge biochar: Sorption mechanisms and bench applications", Bioresource Technology, 238, pp.399~406 (2017)[DOI]
- Sun L, "Biochars prepared from anaerobic digestion residue, palm bark, and eucalyptus for adsorption of cationic methylene blue dye:Characterization, equilibrium, and kinetic studies", Bioresource Technology, 140, pp.406~413 (2013)[DOI]
- Park JH, "Adsorption", desorption behavior of cationic and anionic dyes by biochars prepared at normal and high pyrolysis temperatures, 2019, pp.572, 274~282
- Zhu Y, "The relationship of structure and organic matter adsorption characteristics by magnetic cattle manure biochar prepared at different pyrolysis temperatures", Journal of Environmental Chemical Engineering, 8, pp.104112~ (2020)[DOI]
- Inyang M, "Synthesis, characterization, and dye sorption ability of carbon nanotube-biochar nanocomposites", Chemical Engineering Journal, 236, pp.39~46 (2014)[DOI]
- Mall ID, "Removal of Orange G and Methyl Violet dyes by adsorption onto bagasse fly ash-kinetic study and equilibrium isotherm analyses", Dyes and Pigments, 69, pp.210~223 (2006)[DOI]
- Jung KW, "Facile synthesis of magnetic biochar", Fe3O4 nanocomposites using electro-magnetization technique and its application on the removal of acid orange 7 from aqueous media, 2016, pp.220, 672~676
- Rao MM, "Removal of mercury from aqueous solutions using activated carbon prepared from agricultural by-product", waste, 2009, pp.90, 634~643