오브젝트 실루엣과 프리미티브 크기를 고려한 PN-삼각형 기반 변형된 테셀레이션 기법
A Modified Tessellation Method based on PN-Triangle Considering Object Silhouette and Primitive Size
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The high resolution mesh tessellation method using PN-triangle (Point Normal – triangle) derived from the low resolution mesh triangle is widely used because it does not require the adjacent triangle information. With this PN-triangle tessellation method, the method to further subdivide triangles close to the silhouette was also presented. However, the previous method produces the extreme case where the tessellation factor will be zero when a triangle is far away from the silhouette. In this paper, unlike the previous method, ① the modified method to smoothly increase the tessellation factor as close to the silhouette is proposed. ② Also the method to increase the tessellation factor as close the view and away to the silhouette is proposed. ③ The modified method to increase the tessellation factor as the size of primitive is also proposed. The proposed method is verified by the experimental simulation.
Abstract
The high resolution mesh tessellation method using PN-triangle (Point Normal – triangle) derived from the low resolution mesh triangle is widely used because it does not require the adjacent triangle information. With this PN-triangle tessellation method, the method to further subdivide triangles close to the silhouette was also presented. However, the previous method produces the extreme case where the tessellation factor will be zero when a triangle is far away from the silhouette. In this paper, unlike the previous method, ① the modified method to smoothly increase the tessellation factor as close to the silhouette is proposed. ② Also the method to increase the tessellation factor as close the view and away to the silhouette is proposed. ③ The modified method to increase the tessellation factor as the size of primitive is also proposed. The proposed method is verified by the experimental simulation.
참고문헌 (13)
- E. Catmull, "Recursively generated B-spline surfaces on arbitrary topological meshes", Comput. Aid. Des, 10(6), pp.350~355 (1978)
- Loop, Charles, "Approximating Catmull-Clark subdivision surfaces with bicubic patches", ACM Transactions on Graphics (TOG), 27(1) (2008)
- A. Vlachos, "Curved PN triangles", Proceedings of the 2001symposium on Interactive 3D graphics, pp.159~166 (2001), ACM
- "DirectX SDK Sample: PNTriangles11", ~
- Scalar tagged PN triangles, "Boubekeur, Tamy", ~, pp.EUROGRAPHICS Short Papers (2005)
- T. Boubekeur, "Generic mesh refinement on GPU", Proceedings of the ACM SIGGRAPH, 2005, 99~104[DOI]
- Oshita, Masaki, "Real-time cloth simulation with sparse particles and curved faces", Computer Animation, 2001. The Fourteenth Conference on Computer Animation. Proceedings (2001), IEEE
- Chung, Kyusik, "A PN triangle generation unit for fast and simple tessellation hardware", Circuits and Systems, 2003. ISCAS'03. Proceedings of the 2003 International Symposium on (2003), IEEE
- Cui, Yuanmin, "GPU-based smooth free-form deformation with sharp feature awareness", Computer Aided Geometric Design (2015)
- 강영민, "실시간 종이 구김 시뮬레이션을 위한 적응적 메쉬 구조", 한국게임학회 논문지, 9(4), pp.97~106 (2009), 한국게임학회
- 김준호, "기능성 게임을 위한 볼륨 메쉬 파라메터화", 한국컴퓨터게임학회논문지, 4(22), pp.27~32 (2010), (사)한국컴퓨터게임학회
- 유관희, "기하학 특성을 반영한 측지거리 계층적 메쉬 분할", 한국컴퓨터게임학회논문지, 89(15), pp.89~96 (2008), (사)한국컴퓨터게임학회
- 민경하, "효율적인 게임 캐릭터 조작을 위한 삼각형 메쉬에서의 주곡률 방향의 측정", 한국컴퓨터게임학회논문지, 129(13), pp.129~135 (2008), (사)한국컴퓨터게임학회