안티몬 도핑된 주석 산화물에 담지된 백금 촉매의 에탄올 산화 반응 및 안정성 연구
Ethanol Electro-Oxidation and Stability of Pt Supported on Sb-Doped Tin Oxide
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
안티몬 도핑된 주석 산화물(ATO)에 담지된 백금 촉매(Pt/ATO)의 에탄올 산화반응에 대한 활성 과 전기화학적 안정성을 평가하였다. Pt 콜로이드 입자를 ATO 입자에 담지하여 Pt/ATO 촉매를 제조하였으며, 제조된 촉매는 X-ray diffraction, transmission electron microscopy (TEM), 그 리고 cyclic voltammetry를 이용하여 평가하였다. Pt/ATO 촉매의 에탄올 산화 활성은 Pt/C, PtRu/C에 비해 크게 우수하였다. Pt/ATO 촉매의 전기화학적 안정성 또한 Pt/C에 비해 우수하였 으며, TEM 사진을 통하여 확인한 결과 Pt/ATO의 안정성은 Pt입자의 성장 속도가 Pt/C에 비해 느리기 때문인 것으로 확인되었다. 위의 결과로부터 ATO 나노입자가 직접 에탄올 연료전지용 담지체로서, 활성 및 안정성 향상을 기대할 수 있는 물질임을 확인하였다
Abstract
Electrocatalytic activities and stabilities of Pt supported on Sb-doped SnO2 (ATO) were examined for ethanol oxidation reactions. Pt colloidal particles were deposited on ATO nanoparticles (Pt/ATO) and the prepared electrocatalysts were characterized by X-ray diffraction, transmission electron microscopy (TEM), and cyclic voltammetry. Electrochemical activity of the Pt/ATO for ethanol electro-oxidation was compared to those of Pt supported on carbon (Pt/C) and commercial PtRu/ C. The activitiy of the Pt/ATO was much higher than those of the Pt/C and commercial PtRu/ C. The Pt/ATO exhibited much higher electrochemical stabilities than the Pt/C in 0.5M H2SO4 and in 0.5M H2SO4/1M C2H5OH. According to TEM, the growth rate of Pt particles was lower in the Pt/ATO than it was in the Pt/C. The ATO nanoparticle appears to be a promising support material that promotes electrochemical reactions and stabilizes catalyst particles in direct ethanol fuel cell
참고문헌 (21)
- W. Zhou, "Pt based anode catalysts for direct ethanol fuel cells", Appl. Catal. B, 46, pp.273~ (2003)
- K.-Y. Chan, "Supported mixed metal nanoparticles as electrocatalysts in low temperature fuel cells", J. Mater. Chem, 14, pp.505~ (2004)
- K.-W. Park, "Origin of the enhanced catalytic activity of carbon nanocoil-supported PtRu alloy electrocatalysts", J. Phys. Chem. B, 108, pp.939~ (2004)
- I.-S. Park, "Electrocatalytic enhancement of methanol oxidation by graphite nanofibers with a high loading of PtRu alloy nanoparticles", Carbon, 46, pp.28~ (2007)
- A. C. C. Tseung, "Hydrogen spill-over effect on Pt", WO3 anode catalysts, 1997, pp.38, 439~
- B. L. Garcia, "Low-Temperature Synthesis of a PtRu", Nb0.1Ti0.9O2 Electrocatalyst for Methanol Oxidation, 2007, pp.10, 108~
- B. Moreno, "Synthesis of the ceramic-metal catalysts (PtRuNi-TiO2) by the combustion method", J. Power Sources, 169, pp.98~ (2007)
- A. L. Santos, "Electrooxidation of methanol on Pt microparticles dispersed on SnO2 thin films", Electrochim. Acta, 50, pp.2615~ (2005)
- T. Okanishi, "Chemical interaction between Pt and SnO2 and influence on adsorptive properties of carbon monoxide", Appl. Catal. A, 298, pp.181~ (2006)
- L. Jiang, "Size-controllable synthesis of monodispersed SnO2 nanoparticles and application in electrocatalysts", J. Phys. Chem. B, 109, pp.8774~ (2005)
- T. Ioroi, "Sub-stoichiometric titanium oxide-supported platinum electrocatalyst for polymer electrolyte fuel cells", Electrochem. Comm, 7, pp.183~ (2005)
- H. Chhina, "An oxidationresistant indium tin oxide catalyst support for proton exchange membrane fuel cells", J. Power Sources, 161, pp.893~ (2006)
- C. Bock, "Size-Selected Synthesis of PtRu Nano-Catalysts: Reaction and Size Control Mechanism", J. Am. Chem. Soc, 126, pp.8028~ (2004)
- H.-J. Ahn, "Investigation of the structural and electrochemical properties of size-controlled SnO2 nanoparticles", J. Phys. Chem. B, 108, pp.9815~ (2004)
- M. Arenz, "Carbonsupported Pt-Sn electrocatalysts for the anodic oxidation of H2, CO, and H2", CO mixtures. Part II: The structureactivity relationship, 2005, pp.232, 402~
- W. J. Zhou, "Direct ethanol fuel cells based on PtSn anodes: the effect of Sn content on the fuel cell performance", J. Power Sources, 140, pp.50~ (2005)
- K.-I. Ota, "Dissolution of platinum anodes in sulfuric acid solution", J. Electroanal. Chem, 257, pp.205~ (1988)
- B. Merzougui, "Rotating disk electrode investigation of fuel cell catalyst degration due to potential cycling in acid electrode", J. Electrochem. Soc, 153, pp.A2220~ (2006)
- M. W. Breiter, "Voltammetric study of the anodic activation of platinum", Electrochim. Acta, 11, pp.905~ (1966)
- Y. Nagai, "Sintering inhibition mechanism of platinum supported on ceriabased oxide and Pt-oxide-support interaction", J. Catal, 242, pp.103~ (2006)
- C.-C. Shih, "Pt", C stabilization for catalytic wet-air oxidation: Use of grafted TiO2, 2006, pp.240, 137~