Effects of Mo on the Passive Films Formed on Ni-(15, 30)Cr-5Mo Alloys in pH 8.5 Buffer Solution
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The composition and semiconducting properties of the passive films formed on Ni- (15, 30)Cr-5Mo alloys in pH 8.5 buffer solution were examined. The depth concentration profile of passive films formed on Ni-(15, 30)Cr-5Mo in pH 8.5 buffer solution showed that Mo enhances the enrichment of Cr. The Mott-Schottky plot for the passive film on Ni-(15, 30)Cr- 5Mo closely resembled that for the film on Cr, whereas those for the less Cr-enriched film on Mo-free alloys showed similar behavior to that for the film on Ni. The acceptor density was reduced by increasing Cr content in Ni-(15, 30)Cr-(0, 5)Mo alloys, but addition of Mo considerably increased the acceptor density.
Abstract
The composition and semiconducting properties of the passive films formed on Ni- (15, 30)Cr-5Mo alloys in pH 8.5 buffer solution were examined. The depth concentration profile of passive films formed on Ni-(15, 30)Cr-5Mo in pH 8.5 buffer solution showed that Mo enhances the enrichment of Cr. The Mott-Schottky plot for the passive film on Ni-(15, 30)Cr- 5Mo closely resembled that for the film on Cr, whereas those for the less Cr-enriched film on Mo-free alloys showed similar behavior to that for the film on Ni. The acceptor density was reduced by increasing Cr content in Ni-(15, 30)Cr-(0, 5)Mo alloys, but addition of Mo considerably increased the acceptor density.
참고문헌 (28)
- W. Z. Friend, "Corrosion of Nickel and Nickel-Base Alloys", pp.307~ (1980), Wiley Interscience
- N. Sridhar, "Corrosion of Nickel-Base Alloys", Haynes International Conference Proceedings, pp.643~ (2000)
- G. M. Gordon, "Corrosion considerations related to permanent disposal of high-level radioactive waste", Corrosion, 58, pp.811~ (2002)
- J. J. Gray, "Influence of Solution pH, Anion Concentration,and Temperature on the Corrosion Properties of Alloy 22", J. Electrochem. Soc, 153, pp.B61~ (2006)
- N. Priyantha, "An electrochemical impedance study of Alloy 22 in NaCl brine at elevated temperature. I. Corrosion behavior", J. Electroanal. Chem, 572, pp.409~ (2004)
- A. Nadezhdin, , Mater. Perform, 31, pp.57~ (1992)
- M. Bojinov, "Transpassive dissolution of Ni-Cr alloys in sulphate solutionscomparison between a model alloy and two industrial alloys", Electrochim. Acta, 47, pp.1697~ (2002)
- H. Nanjo, "Atomic-scale flattening of Ni-Cr alloy surfaces by electrochemical passivation treatments", Current Applied Physics, 4(2-4), pp.156~159 (2004), 한국물리학회
- Y. Takizawa, "Corrosion-resistant Ni-Cr-Mo alloys in hot concentrated sulphuric acid with active carbon", Mater. Sci. Eng. A, 198, pp.145~ (1995)
- M. Bojinov, "The mechanism of transpassive dissolution of Ni-Cr alloys in sulphate solutions", Electrochim. Acta, 45, pp.2791~ (2000)
- L. J. Oblonsky, "In Situ X-Ray Absorption Near-Edge Structure Study of the Active and Transpassive Dissolution of Passive Films on Ni and Ni-Cr Alloys in 0.1 M H2SO4", J. Electrochem. Soc, 148, pp.B405~ (2001)
- A. C. Lloyd, "Cr, Mo and W alloying additions in Ni and their effect on passivity", Electrochim. Acta, 49, pp.3015~ (2004)
- R. S. Lillard, "Crevice corrosion of alloy 625 in chlorinated ASTM artificial ocean water", Corrosion, 50, pp.251~ (1994)
- M. Bojinov, "The Influence of Solution Anion on the Mechanism of Transpassive Dissolution of Ferrous- and Nickel-Based Alloys", J. Phys. Chem. B, 107, pp.5101~ (2003)
- C. R. Clayton, "Corrosion Mechanisms in Theory and Practice", pp.6~ (1995), Marcel Dekker
- A. J. Sedriks, "Corrosion of Stainless Steels" (1979), Wiley
- A. C. Lloyd, "Effects of Temperature and Potential on the Passive Corrosion Properties of Alloys C22 and C276", J.Electrochem. Soc, 150, pp.B120~ (2003)
- H. Huang, "Effect of chemical composition on the corrosion behavior of Ni-Cr-Mo dental casting alloys", J. Biomed.Mater. Res, 60, pp.458~ (2002)
- N. E. Hakiki, "The electronic structure of passive films formed on stainless steels", Corros. Sci, 37, pp.1809~ (1995)
- H. Tsuchiya, "Semiconductive behavior of passive films formed on pure Cr and Fe-Cr alloys in sulfuric acid solution", Electrochim. Acta, 47, pp.4357~ (2002)
- K. S. Raja, "Improved corrosion resistance of Ni-22Cr-13Mo-4W Alloy by surface nanocrystallization", Mater. Lett, 59, pp.570~ (2005)
- D. D. Macdonald, "An electrochemical impedance study of Alloy-22 in NaCl brine at elevated temperature: II. Reaction mechanism analysis", J. Electroanal. Chem, 572, pp.421~ (2004)
- D. D. Macdonald, "Passivity-the key to our metals-based civilization", Pure Appl. Chem, 71, pp.951~ (1999)
- C. R. Clayton, "A Bipolar Model of the Passivity of Stainless Steel: The Role of Mo Addition", J.Electrochem. Soc, 133, pp.2465~ (1986)
- M. Sakashita, "The effect of molybdate anion on the ion-selectivity of hydrous ferric oxide films in chloride solutions", Corros. Sci, 17, pp.473~ (1977)
- K. Hashimoto, "An X-ray photo-electron spectroscopic study on the role of molybdenum in increasing the corrosion resistance of ferritic stainless steels in HC1", Corros. Sci, 19, pp.3~ (1970)
- H. Ogawa, "Auger electron spectroscopic and electrochemical analysis of the effect of alloying elements on the passivation behavior of stainless steels", Corrosion, 34, pp.53~ (1978)
- M. Urquidi, "Solute-Vacancy Interaction Model and the Effect of Minor Alloying Elements on the Initiation of Pitting Corrosion", J.Electrochem. Soc, 132, pp.555~ (1985)
