Electrospun Poly(Ether Sulfone) Membranes Impregnated with Nafion for High-Temperature Polymer Electrolyte Membrane Fuel Cells
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Electrospun poly(ether sulfone) (PES) membrane impregnated with Nafion (PES-N) have been developed for high-temperature polymer-electrolyte membrane fuel cell (HTPEMFC). The PES-N obtains highly thermal stability up to 430℃, which is higher than that of the commercial Nafion 212. The PES-N membrane shows a good proton conductivity of about 10-2 S cm-1 in a temperature range from 75℃ to 120℃. The membrane-electrode assembly (MEA) with the PES-N membrane exhibits a current density of 1.697 A cm-2 at 75℃, and 0.813 A cm-2 at 110℃ when the applied voltage is 0.6 V, whereas the MEA with the Nafion 212 membrane shows the current density of 0.647 Acm-2 at 110℃. The results suggest that the PES-N can be a good candidate for a polymer electrolyte membrane of the HT-PEMFC.
Abstract
Electrospun poly(ether sulfone) (PES) membrane impregnated with Nafion (PES-N) have been developed for high-temperature polymer-electrolyte membrane fuel cell (HTPEMFC). The PES-N obtains highly thermal stability up to 430℃, which is higher than that of the commercial Nafion 212. The PES-N membrane shows a good proton conductivity of about 10-2 S cm-1 in a temperature range from 75℃ to 120℃. The membrane-electrode assembly (MEA) with the PES-N membrane exhibits a current density of 1.697 A cm-2 at 75℃, and 0.813 A cm-2 at 110℃ when the applied voltage is 0.6 V, whereas the MEA with the Nafion 212 membrane shows the current density of 0.647 Acm-2 at 110℃. The results suggest that the PES-N can be a good candidate for a polymer electrolyte membrane of the HT-PEMFC.
참고문헌 (16)
- Q. Yan, "Steady state and dynamic performance of proton exchange membrane fuel cells (PEMFCs) under various operating conditions and load changes", J. Power Sources, 161, pp.492~ (2006)
- B. Smitha, "Solid polymer electrolyte membranes for fuel cell applications-a review", J. Membr. Sci, 259, pp.10~ (2005)
- H. L. Tang, "Synthesis and characterization of a self-assembled nafion", silica nanocomposite membrane for polymer electrolyte membrane fuel cells, 2008, pp.112, 11556~
- J. Hu, "Anhydrous proton conducting membranes based on electron-deficient nanoparticles", PBI-OO, Electrochem. Comm, pp.2009, 11[DOI]
- Y. Fu, "Acid–base blend membranes based on 2-amino-benzimidazole and sulfonated poly (ether ether ketone) for direct methanol fuel cells", Electrochem. Comm, 9, pp.905~ (2007)
- H. J. Kim, "Nafion-Nafion", polyvinylidene fluoride–Nafion laminated polymer membrane for direct methanol fuel cells, 2004, pp.135, 66~
- J. Zhang, "High temperature PEM fuel cells", J. Power Sources, 160, pp.872~ (2006)
- M. M. Hasani-Sadrabadi, "Novel high-performance nanocomposite proton exchange membranes based on poly (ether sulfone)", Renewable Energy, 35, pp.226~ (2010)
- D. Li, "Electrospinning of nanofibers: reinventing the wheel?", Adv. Mater, 16, pp.1151~ (2004)
- S. W. Choi, "Characterization of electrospun PVDF fiber-based polymer electrolytes", Chem. Mater, 19, pp.104~ (2007)
- S. W. Choi, "Nafion-impregnated electrospun polyvinylidene fluoride composite membranes for direct methanol fuel cells", J. Power Sources, 180, pp.167~ (2008)
- 육진옥, "서로 다른 친수성구조를 가지는 고분자전해질 연료전지용 멀티블록형 술폰산화 폴리아릴렌에테르술폰 전해질막의 합성 및 특성 분석", 전기화학회지, 18(2), pp.75~80 (2015), 한국전기화학회
- X. Wang, "Electrospun nanofibrous membranes for highly sensitive optical sensors", Nano Lett, 2, pp.1273~ (2002)
- P. P. Tasi, "Different electrostatic methods for making electret filters", J. Electrostat, 54, pp.333~ (2002)
- A. Li, "The effect of carbon monoxide and steam on the hydrogen permeability of a Pd", stainless steel membrane, 2000, pp.165, 135~
- S. D. Mikhailenko, "Measurements of PEM conductivity by impedance spectroscopy", Solid State Ionics, 179, pp.619~ (2008)