서브마이크로미터 크기의 실리콘 음극용 폴리페난트렌퀴논-폴리아크릴산 전도성 고분자 복합 바인더
Poly(phenanthrenequinone)-Poly(acrylic acid) Composite as a Conductive Polymer Binder for Submicrometer-Sized Silicon Negative Electrodes
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
나노 크기에 비해 부피 변화가 상대적으로 더 큰 서브마이크로미터 크기의 실리콘 음극의 성능향상을 위해 도전재 역할을 하는 3,6-poly(phenanthrenequinonone) (PPQ) 전도성 고분자 바인더와 카복시기를 가져 결착력이 좋은 poly(acrylic acid) (PAA)를 블렌딩 한 복합 바인더를 도입하였다. PAA를 PPQ와 블렌딩하여 전극을 제조했을 때 결착력이 월등히 증가하였고 충방전실험 결과 PPQ 바인더를 단독으로 사용한 전극보다 안정된 수명 특성을 나타냈다. PPQ와PAA의 함량 비율을 2:1, 1:1, 1:2(무게비)로 하여 각 전극의 수명 특성을 비교했을 때, PPQ의함량이 가장 큰 전극(2:1, QA21)이 50번째 사이클에서 가장 좋은 용량 유지율을 보였다. 이는PPQ가 입자 간 또는 입자와 집전체 사이에서 도전재로서 존재하여 전자가 이동할 수 있는 통로를 제공해 주고 PAA가 적절한 결착력을 제공해주어 전극의 내부 저항이 가장 작았기 때문이다. PPQ-PAA 복합 바인더를 사용한 전극은 입자 형태의 도전재인 super-P를 전체 전극 무게 대비20%를 첨가하여 제조한 전극보다도 더 안정적인 수명 특성을 나타내었다.
Abstract
In order to improve performances of submicrometer-sized Si negative electrode which shows larger volumetric change than nano-sized Si, composite binders are introduced by blending between poly(phenanthrenequinone) (PPQ) conductive polymer binder and poly(acrylic acid) (PAA) having good adhesion strength due to its carboxyl functional group. Blending between PPQ and PAA shows an effect that the adhesion strength of the Si electrode with the composite conductive binder is greatly improved after blending and this makes its better stable cycle performance. Blending ratios between PPQ and PAA in this work are 2:1, 1:1, 1:2 (by weight) and the best capacity retention at 50th cycle is observed in the electrode with the blending ratio 2:1 (named QA21). This is because that PPQ plays a role of conductive carbon among the Si particles or between Si particles and Cu current collector and PAA binds effectively the particles and the current collector. According to this synergetic effect, the internal resistance of the Si electrode with the blending ratio 2:1 is the smallest value. In addition, the Si electrode with PPQ-PAA composite binder shows the better stable cycle performance than the electrode with conventional super-P conductive carbon (20 wt.%).
참고문헌 (24)
- J. G. Lee, "A Calculation Model to Assess Two Irreversible Capacities Evolved in Silicon Negative Electrodes", J. Electrochem. Soc, 162, pp.A1579~ (2015)
- J. H. Ryu, "Failure Modes of Silicon Powder Negative Electrode in Lithium Secondary Batteries", Electrochem. Solid-State Lett, 7, pp.A306~ (2004)
- X. N. Zhang, "Si-Si3N4 composites as anode materials for lithium ion batteries", Solid State Ionics, 178, pp.1107~ (2007)
- P. Zuo, "Si-Mn composite anodes for lithium ion batteries", J. Alloys Compd, 414, pp.265~ (2006)
- Z. Y. Zeng, "Nanostructured Si", TiC composite anode for Li-ion batteries, 2008, pp.53, 2724~
- J. -H. Kim, "Enhanced cycle performance of SiO-C composite anode for lithium-ion batteries", J. Power Sources, 170, pp.456~ (2007)
- 김건우, "탄소가 코팅된 일산화규소(SiO) 음극에서 전해질 첨가제로서 Lithium Bis(oxalato)borate의 영향", 전기화학회지, 17(1), pp.49~56 (2014), 한국전기화학회
- K. W. Kim, "Capacity variation of carbon-coated silicon monoxide negative electrode for lithium-ion batteries", Electrochim. Acta, 103, pp.226~ (2013)
- T. Kim, "Solid-State NMR and Electrochemical Dilatometry Study on Li+ Uptake", Extraction Mechanism in SiO Electrode, 2007, pp.154, A1112~
- H. Kim, "A Critical Size of Silicon Nano-Anodes for Lithium Rechargeable Batteries", Angew. Chem. -Int. Edit, 49, pp.2146~ (2010)
- H. Li, "A High Capacity Nano-Si Composite Anode Material for Lithium Rechargeable Batteries", Electrochem. Solid-State Lett, 2, pp.547~ (1999)
- K. Peng, "Silicon nanowires for rechargeable lithium-ion battery anodes", Appl. Phys. Lett, 93, pp.033105~ (2008)
- B. Laïk, "Silicon nanowires as negative electrode for lithium-ion microbatteries", Electrochim. Acta, 53, pp.5528~ (2008)
- M. -H. Park, "Silicon Nanotube Battery Anodes", Nano Lett, 9, pp.3844~ (2009)
- T. Song, "Arrays of Sealed Silicon Nanotubes As Anodes for Lithium Ion Batteries", Nano Lett, 10, pp.1710~ (2010)
- D. Lin, "A high tap density secondary silicon particle anode fabricated by scalable mechanical pressing for lithium-ion batteries", Energy Environ. Sci, 8, pp.2371~ (2015)
- W. -R. Liu, "Effect of electrode structure on performance of Si anode in Li-ion batteries:Si particle size and conductive additive", J. Power Sources, 140, pp.139~ (2005)
- S. -M. Kim, "Poly(phenanthrenequinone) as a conductive binder for nano-sized silicon negative electrodes", Energy Environ. Sci, 8, pp.1538~ (2015)
- S. Komaba, "Study on Polymer Binders for High-Capacity SiO Negative Electrode of Li-Ion Batteries", J. Phys. Chem. C, 115, pp.13487~ (2011)
- J. S. Bridel, "Key Parameters Governing the Reversibility of Si", Carbon, Chem. Mater, pp.2010, 22[DOI]
- Z. -J. Han, "High-capacity Si-graphite composite electrodes with a self-formed porous structure by a partially neutralized polyacrylate for Li-ion batteries", Energy Environ. Sci, 5, pp.9014~ (2012)
- A. Magasinski, "Toward Efficient Binders for Li-Ion Battery Si-Based Anodes: Polyacrylic Acid", ACS Appl. Mater. Interfaces, 2, pp.3004~ (2010)
- M. N. Obrovac, "Structural Changes in Silicon Anodes during Lithium Insertion", Extraction, 2004, pp.7, A93~
- M. N. Obrovac, "Reversible Cycling of Crystalline Silicon Powder", J. Electrochem. Soc, 154, pp.A103~ (2007)