The Corrosion Study of Al Current Collector in Phosphonium Ionic Liquid as Solvent for Lithium Ion Battery
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
A room temperature ionic liquid (RTIL) based on trihexyl (tetradecyl)phosphonium bis(trifluoromethanesulfonyl) imide ([(C_(6)H_13)_(3)P(C_(14)H_29)] [TFSI];P_(66614)TFSI) was synthesized and analyzed to determine their characteristics and properties. The bis(trifluoromethanesulfonyl)imide (TFSI) anion is widely studied as an ionic liquid (IL) forming anion which imparts many useful properties, notably electrochemical stability. Especially its electrochemical and physical characteristics for solvent of lithium ion battery were investigated in detail. P_(66614) TFSI exhibits fairly low conductivity (0.89 mS cm^(−1)) and higher viscosity (298 K: 277 cP; 343 K: 39 cP) than other ionic liquids, but it exhibits a high thermal stability (over 400oC). Especially corrosion behavior on Al current collector was tested at room temperature and further it was confirmed that thermal resistivity for Al corrosion was highly increased in 1.0M LiTFSI/P_(66614-)TFSI electrolyte comparing with other RTILs by linear sweep thermometry.
Abstract
A room temperature ionic liquid (RTIL) based on trihexyl (tetradecyl)phosphonium bis(trifluoromethanesulfonyl) imide ([(C_(6)H_13)_(3)P(C_(14)H_29)] [TFSI];P_(66614)TFSI) was synthesized and analyzed to determine their characteristics and properties. The bis(trifluoromethanesulfonyl)imide (TFSI) anion is widely studied as an ionic liquid (IL) forming anion which imparts many useful properties, notably electrochemical stability. Especially its electrochemical and physical characteristics for solvent of lithium ion battery were investigated in detail. P_(66614) TFSI exhibits fairly low conductivity (0.89 mS cm^(−1)) and higher viscosity (298 K: 277 cP; 343 K: 39 cP) than other ionic liquids, but it exhibits a high thermal stability (over 400oC). Especially corrosion behavior on Al current collector was tested at room temperature and further it was confirmed that thermal resistivity for Al corrosion was highly increased in 1.0M LiTFSI/P_(66614-)TFSI electrolyte comparing with other RTILs by linear sweep thermometry.
참고문헌 (10)
- J. Arai, "Development of ahigh power lithium secondary battery for hybrid electricvehicles’", J. Power Sources, 146, pp.788~ (2005)
- T. Horiba, "Manganese-based lithium batteries forhybrid electric vehicle applications", J. Power Sources, 119, pp.893~ (2003)
- G. Park, "Theimportant role of additives for improved lithium ionbattery safety’", J. Power Sources, 189, pp.602~ (2009)
- K. Tsunashima, "A lithiumbattery electrolyte based on a room-temperature phosphoniumionic liquid’", Chem. Lett, 37, pp.314~ (2008)
- M. Egashira, "Functionalized imidazolium ionic liquids aselectrolyte components of lithium batteries", J. PowerSources, 174, pp.560~ (2007)
- S. S. Zhang, "‘Alkaline composite film asa separator for rechargeable lithium batteries", J. PowerSources, 109, pp.458~ (2002)
- J. Mun, "Linear-sweep thermammetry study oncorrosion behavior of al current collector in ionic liquidsolvent", Electrochem. Solid-State Lett, 13, pp.109~ (2010)
- 차은희, "Electrochemical Characterization of Lithium Polyelectrolyte Based on Ionic Liquid", 전기화학회지, 12(3), pp.271~275 (2009), 한국전기화학회
- C. Peng, "Investigation of the anodic behavior of Al currentcollector in room temperature ionic liquid electrolytes", Electrochim. Acta, 53, pp.4764~ (2008)
- G. T. Burstein, "Cyclic thermammetry", Electrochem. Commun, 6, pp.1037~ (2004)