An Experimental Study on Hydrodynamic Forces of Korea Autonomous Surface Ship in Various Loading Conditions
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Currently, shipping by sea is becoming common because of the low price and the safety of goods. The ship is designed as a larger vessel to meet the need of this development. In the design stage, the investigation of hydrodynamic forces acting on the ship hull is very important in predicting the ship's maneuverability. Given that the ship docks at various ports for loading or discharging goods, the ship usually operates in various loading conditions, depending on the site condition and other various factors. Hence, it is necessary to investigate the effect of the loading condition on the hydrodynamic forces acting on the ship, to most accurately determine the maneuverability of the ship. In this study, an experiment of Korea Autonomous Surface Ship (KASS) was conducted at the towing tank of Changwon National University to measure the hydrodynamic forces acting on the KASS. The loading condition considered in this experiment is determined based on the draft, which was decreased by 5% for each loading condition. The smallest draft is 85% of the design draft. The static test as Oblique Towing Test (OTT), Circular Motion Test (CMT), Circular Motion Test with Drift (CMTD) is performed in the various loading conditions. First, the hydrodynamic forces in the Oblique Towing test (OTT) are compared with the result of other institutes. Second, the hydrodynamic forces in various drift angle, yaw rate and loading conditions are measured. Finally, the influence of the loading conditions on the hydrodynamic coefficient is discussed.
Abstract
Currently, shipping by sea is becoming common because of the low price and the safety of goods. The ship is designed as a larger vessel to meet the need of this development. In the design stage, the investigation of hydrodynamic forces acting on the ship hull is very important in predicting the ship's maneuverability. Given that the ship docks at various ports for loading or discharging goods, the ship usually operates in various loading conditions, depending on the site condition and other various factors. Hence, it is necessary to investigate the effect of the loading condition on the hydrodynamic forces acting on the ship, to most accurately determine the maneuverability of the ship. In this study, an experiment of Korea Autonomous Surface Ship (KASS) was conducted at the towing tank of Changwon National University to measure the hydrodynamic forces acting on the KASS. The loading condition considered in this experiment is determined based on the draft, which was decreased by 5% for each loading condition. The smallest draft is 85% of the design draft. The static test as Oblique Towing Test (OTT), Circular Motion Test (CMT), Circular Motion Test with Drift (CMTD) is performed in the various loading conditions. First, the hydrodynamic forces in the Oblique Towing test (OTT) are compared with the result of other institutes. Second, the hydrodynamic forces in various drift angle, yaw rate and loading conditions are measured. Finally, the influence of the loading conditions on the hydrodynamic coefficient is discussed.
참고문헌 (9)
- Dai, K., "Manoeuvering prediction of KVLCC2 with hydrodynamic derivatives generated by a virtual captive model test", Journal of Polish Maritime Research, 26(4), pp.16~26 (2019)
- Islam, H., "Estimation of linear hydrodynamic derivatives of a VLCC using static drift simulation", Proceeding of AIP conference, pp.1~7 (2018)
- Kim, D. J., "Mathematical model for harbor manoeuvers of Korea Autonomous Surface Ship (KASS) based on captive model test", Conference of the Korean Association of Ocean Science and Technology Societies, pp.1~8 (2021)
- Yun-SokLee, "The Prediction of Hydrodynamic Forces Acting on Ship Hull in Laterally Berthing Maneuver Using CFD", 한국항해항만학회지, 27(3), pp.253~258 (2003), 한국항해항만학회
- Nguyen, V. M., "Experimental study on hydrodynamic forces acting on ship hull and rudder behind the propeller in regular waves", Proceeding of 11th International Work shop on Ship and Marine Hydrodynamics, pp.1~12 (2019)
- 박태출, "다양한 수직방향 무게중심을 고려한 사항 중 탱커 선체에 작용하는 유체력에 관한 연구", 한국해양공학회지, 32(6), pp.433~439 (2018), 한국해양공학회[DOI]
- Wang, H. M., "Experimental and numerical study of hydrodynamic forces on ship in oblique motion", Proceeding of International Conference on Remote Sensing, Environment and Transportation Engineering, pp.328~331 (2011)
- Yang, X., "A numerical study on flow field and maneuvering derivatives of KVLCC2 model at drift condition", Journal of Marine Engineering and Technology, pp.1~12 (2019)
- Yasukawa, H., "Introduction of MMG model standard method for ship maneuvering predictions", Journal of Marine Science and Technology, 20, pp.37~52 (2014)