Simulation of Various Baffle Types in a Constructed Wetland Sedimentation Tank using CFD
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Constructed wetlands are widely applied in urban and rural areas for various purposes such as pollutants reduction, acquisition of eco-spaces and habitats, flooding reduction, acquisition of water resources and environmental education. Since the design of constructed wetlands utilizes ecosystems, special consideration must be given to ecological mechanisms, environmental mechanisms and hydrological mechanisms. To ensure the sustainable functionality of constructed wetlands, it is necessary to achieve stable flow rate and velocity, and remove sediments to ensure sufficient space for detention. To enhance the efficiency of constructed wetland sedimentation basins, this study determined the optimal position for baffle installation, and applied Computational Fluid Dynamics (CFD) to the cross-sectional design of wetlands. CFD analysis revealed that the decrease in flow velocity with baffle installation enhanced the efficiency of sedimentation of particulate matters. Vertical baffles had higher sedimentation efficiency than those with an inclined angle. When vertical baffles were installed in the sedimentation basin of a hybrid constructed wetland to reduce non-point source pollutants in urban areas, the average flow velocity within the basin decreased by 10~30%, while the sedimentation efficiency improved by 1.3~1.5 times. The application of CFD to constructed wetlands is expected to improve the cost efficiency of designing hybrid constructed wetlands with high removal efficiency.
Abstract
Constructed wetlands are widely applied in urban and rural areas for various purposes such as pollutants reduction, acquisition of eco-spaces and habitats, flooding reduction, acquisition of water resources and environmental education. Since the design of constructed wetlands utilizes ecosystems, special consideration must be given to ecological mechanisms, environmental mechanisms and hydrological mechanisms. To ensure the sustainable functionality of constructed wetlands, it is necessary to achieve stable flow rate and velocity, and remove sediments to ensure sufficient space for detention. To enhance the efficiency of constructed wetland sedimentation basins, this study determined the optimal position for baffle installation, and applied Computational Fluid Dynamics (CFD) to the cross-sectional design of wetlands. CFD analysis revealed that the decrease in flow velocity with baffle installation enhanced the efficiency of sedimentation of particulate matters. Vertical baffles had higher sedimentation efficiency than those with an inclined angle. When vertical baffles were installed in the sedimentation basin of a hybrid constructed wetland to reduce non-point source pollutants in urban areas, the average flow velocity within the basin decreased by 10~30%, while the sedimentation efficiency improved by 1.3~1.5 times. The application of CFD to constructed wetlands is expected to improve the cost efficiency of designing hybrid constructed wetlands with high removal efficiency.
참고문헌 (15)
- 조용진, "강우시 교량도로 유출수 수질 및 입경분포", 대한환경공학회지, 29(12), pp.1353~1359 (2007), 대한환경공학회
- 황우철, "전산유체역학을 활용한 개수로형 UV소독장비의 해석기법 연구", 한국유체기계학회 논문집, 18(2), pp.54~59 (2015), 한국유체기계학회[DOI]
- 김이형, "수질 및 수생태계 보전을 위한 21세기 지속가능한 환경정책 방안", 한국습지학회지, 10(2), pp.53~66 (2008), 한국습지학회
- 김대근, "수치모의를 통한 침사지에서의 흐름 및 침사효율 해석", 상하수도학회지, 24(6), pp.713~722 (2010), 대한상하수도학회
- Koskiaho J., "Flow velocity retardation and sediment retention in two constructed wetland-ponds", Ecologic. Eng, 19(5), pp.325~337 (2003)
- 이정용, "도시내 녹지공간 조성을 위한 소규모 HSSF 인공습지 개발", 한국습지학회지, 13(2), pp.199~208 (2011), 한국습지학회
- 이길성, "입자추적기법을 이용한 침전지의 효율 평가", 한국수자원학회 논문집, 37(4), pp.293~304 (2004), 한국수자원학회
- 이소영, "교통관련 토지이용에서의 강우계급별 EMC 산정", 한국습지학회지, 11(2), pp.67~76 (2009), 한국습지학회
- MOE(Ministry of Environment), "The Manual for Installation and Management of Nonpoint Source Control facilities", 86~110 (2014)
- Moon, S. Y., "Development and Performance Assessment of an Infiltration Planter for Roof Runoff Management", Master, pp.2015
- Schamber, D.R., "Numerical analysis of flow in sedimentation basins", J. of Hydraulic Division, 107(5), pp.575~591 (1981), ASCE
- Stovin, V.R., "A computational fluid dynamics(CFD)particle tracking approach to efficiency prediction", Water Science and Technology, 37(1), pp.285~293 (1998)
- US EPA(Environmental Protection Agency), "Wastewater Technology Fact Sheet Free Water Surface Wetlands", EPA 832-F-00-024, ~ (2000)
- Yang, W. Y., "Modeling on the Inclination Plate Settler Stick Fin", Korean Association of Cadastre Information, 5, pp.139~149 (2003)
- Yu, K. K., "Development and Performance Assessment of a Bioretention Technology Treating Urban Stormwater Runoff", Master, pp.2015