분리된 천정의 설치를 통한 목구조 바닥의 내화성능 및 충격음 차단성능 향상
Improvement of Fire Resistance and Impact Sound Insulation Performance for Timber Framed Floor by Installation of Isolated Ceiling
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Fire resistance and impact sound insulation tests were performed for a floor assembly, of which stiffness was reinforced by shortening the span of floor joists by installing glulam beam additionally in the middle or one thirds of the original span, and which an additional ceiling component was installed apart from floor structure. By applying the isolated ceiling, timber framed floor showed 1 hour of fire resistance even in case that dead load was increased by considering cement mortar layer for radiant floor heating. Insulation performance against light and heavy impact sound was improved significantly by applying the sound absorbing layer of big mass and high elasticity in addition to the stiffness improvement and isolated ceiling.
Abstract
Fire resistance and impact sound insulation tests were performed for a floor assembly, of which stiffness was reinforced by shortening the span of floor joists by installing glulam beam additionally in the middle or one thirds of the original span, and which an additional ceiling component was installed apart from floor structure. By applying the isolated ceiling, timber framed floor showed 1 hour of fire resistance even in case that dead load was increased by considering cement mortar layer for radiant floor heating. Insulation performance against light and heavy impact sound was improved significantly by applying the sound absorbing layer of big mass and high elasticity in addition to the stiffness improvement and isolated ceiling.
참고문헌 (15)
- 국토교통부, "건축물의 피난ㆍ방화구조 등의 기준에 관한 규칙", 국토교통부령 제1호, ~ (2013)
- 국토교통부, "공동주택 바닥충격음 차단구조 인정및 관리 기준", 국토교통부 고시 제2013-33호, ~ (2013)
- 박주생, "현장실험을 통한 목조바닥의 구성요소가 충격음 차단성능에 미치는 영향 평가", 목재공학, 40(6), pp.431~444 (2012), 한국목재공학회
- 한국표준협회, "건축구조부재의 내화성능 표준 – 제1부 : 경골목구조 벽 및 바닥", 천장, 2011
- 한국표준협회, "건축구조부재의 내화성능 표준 - 제3부 : 구조용 집성재 보 및 기둥", KS F 1611-3, ~ (2008)
- 한국표준협회, "건축부재의 내화성능시험방법 : 수평 내력구획부재의 성능조건", KS F 2257-5, ~ (2005)
- 한국표준협회, "바닥 충격음 차단성능현장 측정 방법 – 제1부 : 표준 경량충격원에 의한방법", KS F 2810-1, ~ (2001)
- 한국표준협회, "바닥 충격음 차단성능현장 측정 방법 – 제2부 : 표준 중량충격원에 의한방법", KS F 2810-2, ~ (2001)
- 한국표준협회, "건물 및 건물 부재의바닥 충격음 차단 성능 평가 방법 – 제1부 : 표준 경량충격원에 대한 차단 성능", KS F 2863-1, ~ (2002)
- 한국표준협회, "건물 및 건물 부재의 바닥 충격음 차단 성능 평가 방법 – 제1부 : 표준중량 충격원에 대한 차단 성능", KS F 2863-2, ~ (2007)
- Buchanan, A. H, "Timber Design Guide", 83~99 (2002)
- Park, J. S., "Effect of stiffness reinforcement on insulation performance against impact sound in timber framed floor", Proceedings of World Conference on Timber Engineering, 1, pp.101~102 (2012)
- 박주생, "Improvement of Fire Resistance for Timber Framed Walls by Reinforcement of Heavy Timber Frame", 한국가구학회지, 21(6), pp.469~478 (2010), 한국가구학회
- Wakefield C. W, "Control of low-frequency sootstep sound & vibration transmission through a wood framed concrete-topped floor", Journal of the Canadian Acoustics Association, 27(3), pp.16~117 (1999)
- White, R. H., "Charring rate of wood for ASTM E119 exposure fire", Fire Technology, 28, pp.5~30 (1992)