Polyethylene Glycol 주입방법과 건조방법이 목재 부피수축률에 미치는 효과
Effects of the Methods of Polyethylene Glycol Impregnation and Drying on the Volumetric Shrinkage of Wood
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PEG (Polyethylene glycol) impregnation in wood reduces the occurrence of checking during kiln drying. The volumetric shrinkages of wood PEG impregnated by pressure (PEG-P) or soaking (PEG-S) methods, and oven-dried by vent (VD) or air-tight (AD) methods were measured and compared with the controls. The average oven-dry weight of PEG impregnated specimens was larger than that of the controls by 3.6 g, but was not influenced by the drying methods. The average of the total volumetric shrinkage of PEG-P-VD specimens was the least (2.3%), while that of CON-S-AD specimens was the largest (28.9%). Within a drying method the total volumetric shrinkage of the control was the largest followed by PEG-S and PEG-P specimens, which implied that residual PEG in wood restrained its shrinkage during drying.
Abstract
PEG (Polyethylene glycol) impregnation in wood reduces the occurrence of checking during kiln drying. The volumetric shrinkages of wood PEG impregnated by pressure (PEG-P) or soaking (PEG-S) methods, and oven-dried by vent (VD) or air-tight (AD) methods were measured and compared with the controls. The average oven-dry weight of PEG impregnated specimens was larger than that of the controls by 3.6 g, but was not influenced by the drying methods. The average of the total volumetric shrinkage of PEG-P-VD specimens was the least (2.3%), while that of CON-S-AD specimens was the largest (28.9%). Within a drying method the total volumetric shrinkage of the control was the largest followed by PEG-S and PEG-P specimens, which implied that residual PEG in wood restrained its shrinkage during drying.
참고문헌 (16)
- Alma, M. H., "Dimensional stability of several wood species treated with vinyl monimers and polyethylene glycol-1000", International Journal of Polymer Material, 32, pp.93~99 (1996)
- Bariska, M, "Collapse phenomena in eucalypts", Wood Science and Technology, 26, pp.165~179 (1992)
- Chafe, S. C, "Preheating and continuous and intermittent drying in boards of Eucalyptus regnans: F. Muell. I. Effect on internal checking, shrinkage and collapse", Holzforschung, 49, pp.227~233 (1995)
- Hoadley, R. B., "Understanding Wood", pp.288~ (2000), The Taunton Press, Inc.
- 홍승현, "PEG 주입 침엽수 시편의 열처리 후 PEG 잔류량과 평형함수율 측정", 목재공학, 41(3), pp.173~180 (2013), 한국목재공학회[DOI]
- Jeremic, D., "PEG quantification and examination of molecular weight distribution in wood cell walls", Wood Science and Technology, 43(3), pp.317~329 (2009)
- 강호양, "Effect of Pretreatments and Drying Methods on Abnormal Shrinkage of Wood", 한국가구학회지, 19(4), pp.294~299 (2008), 한국가구학회
- 이원희, "건조온도와 아세틸화처리가 소나무 원판의 Polyethylene Glycol 잔류량에 미치는 효과", 목재공학, 43(6), pp.784~791 (2015), 한국목재공학회
- Chemical seasoning: Its effectiveness and present status, "Loughborough, W. K.", U.S. Forest services Forest Products Laboratory Report, D1721~ (1948)
- Mackay, J. F. G., "The cnnurrence, development and control of checking in Tasmanian Eucalyptus obliqua", Holzforshung, 26(4), pp.121~124 (1972)
- Ralph, J, "PEG penetration and the effects of PEG pretreatment in air-dried Eucalyptus regnans", Wood and Fiber Science, 38(1), pp.139~143 (2006)
- Ralph, J., "PEG penetration in three commercially important Tsmanian Eucalypts", Wood and Fiber Science, 36(4), pp.611~619 (2004)
- Rasmussen, E. F., "Dry Kiln-Operator's Manual", Forest Products Lab, Forest Service, USDA, 197~ (1961)
- Stamm, A. J., "Wood and Cellulose Science" (1964), The Ronald Press Company
- Wallstrom, L., "Wood surface stabilization with polyethyleneglycol, PEG", Wood Science and Technology, 29, pp.109~120 (1995)
- Yamaguchi, T., "Effect of temperature on dimensional stability of wood with polyethylene glycol II: Temperature dependence of PEG adsorption and mechanical properties of treated wood", Mokuzai Gakkaishi, 45(6), pp.441~447 (1999)