소성가공에 의한 목재 빨대의 제작
Production of Wooden Straws by Plastic Processing
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study describes the manufacturing process of eco-friendly wooden straws, made from wood veneers as a substitute for petroleum-based products, such as plastic straws. Birch veneers were prepared through rotary cutting, then laminated with kraft paper and spirally wound to form the straw shape. The manufacturing process for wooden straws involved materi- al supply, adhesive coating, spiral winding, and cutting units. During the pilot production of wooden straws, several issues were identified, including adhesion, thickness imbalance, veneer jamming, and breakage. These issues were resolved through modifications and additions to the process. The pilot production resulted in wooden straws with a thickness of 0.4 mm and diame- ters of 8 mm and 10 mm. However, there are still several issues that need to be addressed be- fore wooden straws can be commercially produced, and further research is required to address them.
Abstract
This study describes the manufacturing process of eco-friendly wooden straws, made from wood veneers as a substitute for petroleum-based products, such as plastic straws. Birch veneers were prepared through rotary cutting, then laminated with kraft paper and spirally wound to form the straw shape. The manufacturing process for wooden straws involved materi- al supply, adhesive coating, spiral winding, and cutting units. During the pilot production of wooden straws, several issues were identified, including adhesion, thickness imbalance, veneer jamming, and breakage. These issues were resolved through modifications and additions to the process. The pilot production resulted in wooden straws with a thickness of 0.4 mm and diame- ters of 8 mm and 10 mm. However, there are still several issues that need to be addressed be- fore wooden straws can be commercially produced, and further research is required to address them.
참고문헌 (21)
- 환경부, "1회용품 함께 줄이기 계획", 관계부처 합동, ~ (2019)
- 반성훈, "소성가공에 적합한 침활엽수재의 수종과 특성", 한국가구학회지, 31(4), pp.326~333 (2020), 한국가구학회[DOI]
- Bouckaert, S., "Net zero by 2050: A roadmap for the global energy sector" (2021), International Energy Agency
- Chen, C., "Mildly processed chitin used in one-component drinking straws and single use materials : Strength, biodegradability and recyclability", Chemical Engineering Journal, 442, pp.136173~ (2022)
- Dong, T., "Water-stable, strong, biodegradable lignocellulose straws replacement for plastic straws", Chemical Engineering Journal, 451, pp.138970~ (2023)
- Eskander, S. M., "Reduction in greenhouse gas emissions from national climate legislation", Nature Climate Change, 10(8), pp.750~756 (2020)
- Draft national strategy to prevent plastic pollution – Part of a series on building a circular economy for all, "Environmental Protection Agency", United States Environmental Protection Agency, ~ (2023)
- European Commission, "Turning the tide on single-use plastics" (2021), Publications Office of the European Union
- Ghosh, K., "Roadmap to biodegradable plastics—current state and research needs", pp.6170~6187 (2021), ACS Sustainable Chemistry & Engineering
- Hatakeyama, H., "Lignin and lignans: advances in chemistry" (2010), CRC Press
- Hwang, S. W., "Flexural anisotropy of rift-sawn softwood boards induced by the end-grain orientation", Journal of Wood Science, 67, pp.14~ (2021)
- Jawahir, I. S., "Technological elements of circular economy and the principles of 6R-based closed-loop material flow in sustainable manufacturing", Procedia Cirp, 40, pp.103~108 (2016)
- Kwak, H., "Biodegradable, water-resistant, anti-fizzing, polyester nanocellulose composite paper straws", Advanced Science, 10(1), pp.2205554~ (2023)
- La Rosa, A. D., "LCA and LCC of a chemical recycling process of waste CF-thermoset composites for the production of novel CF-thermoplastic composites. Open loop and closed loop scenarios", Journal of Cleaner Production, 304, pp.127158~ (2021)
- Olsson, A. M., "Viscoelasticity of biomaterials. ACS Symposium Series No 489" (1992), American Chemical Society
- Scheller, J., "Plant-based material, protein and biodegradable plastic", Current opinion in plant biology, 8(2), pp.188~196 (2005)
- Sehlstedt-Persson, M, "Properties of solid wood:Responses to drying and heat treatment. Licentiate Thesis No. 70", Luleå University of Technology, ~ (2005)
- Sen, S., "Kraft lignin chain extension chemistry via propargylation, oxidative coupling, and claisen rearrangement", Biomacromol, 14(10), pp.3399~3408 (2013)
- Tapper, R. J., "An evaluation of life cycle assessment and its application to the closedloop recycling of carbon fibre reinforced polymers", Composites Part B : Engineering, 184, pp.107665~ (2020)
- Wani, W. A., "The journey of alternative and sustainable substitutes for “single‐use” plastics", Advanced Sustainable Systems, 5(12), pp.2100085~ (2021)
- Zhong, Z. W., "Processes for environmentally friendly and", or cost-effective manufacturing, 2021, pp.36(9), 987~1009