선체 응력 모니터링을 위한 FBG 센서에 대한 연구
Study on FBG Sensors for Hull Stress Monitoring
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Vessels receive stress during their navigations as well as during their cargo operations. This stress may cause damages to the hull and may result in accidents. So the hull stress monitoring system(HSMS) is recommended in order to prevent these accidents. In this paper, we manufactured fiber Bragg grating(FBG) sensor and the model ship for towing tank experiments. The strain characteristics of the model ship on the water wave were measured through the towing tank experiment. The FBG sensors and electric strain gauges were attached on the connection jig, and then the characteristics of the FBG sensor were compared with those of the electric strain gauge. The strain of model ship was increased according to the increment of the amplitude of water wave. In particular, the largest strain was measured in the center of the model ship. As the wave period increased, the strain of model ship was decreased.
Abstract
Vessels receive stress during their navigations as well as during their cargo operations. This stress may cause damages to the hull and may result in accidents. So the hull stress monitoring system(HSMS) is recommended in order to prevent these accidents. In this paper, we manufactured fiber Bragg grating(FBG) sensor and the model ship for towing tank experiments. The strain characteristics of the model ship on the water wave were measured through the towing tank experiment. The FBG sensors and electric strain gauges were attached on the connection jig, and then the characteristics of the FBG sensor were compared with those of the electric strain gauge. The strain of model ship was increased according to the increment of the amplitude of water wave. In particular, the largest strain was measured in the center of the model ship. As the wave period increased, the strain of model ship was decreased.
참고문헌 (12)
- Y. J. Kim, "A Study for the measurement of global loads on ship structure using fiber optic sensors", 박사, pp.2008
- IMO, "Recommendation for the fitting of hull stress monitoring system", MSC, 1994
- K. Lindermann, "On the application of hull surveillance system for increased safety and improved structural utilization in fough weather hovik" (1978), Det norske veritas
- Sang Bae Lee, "Fiber grating sensor technology", Mechanics and Materials, 14(4), pp.16~24 (2002)
- 손경락, "선체의 변형을 감지하기 위한 새로운 형태의 장주기 광섬유 격자 소자", 한국마린엔지니어링학회지, 31(6), pp.761~767 (2007), 한국마린엔지니어링학회
- R.O.Claus, "Optical fiber sensors and signal processing for smart materials and structures application", Proc. of ARO Smart Materials, Structures and Mathematical Issues Workshop, pp.29~38 (1988)
- 김천곤, "A digital signal processing algorithm for structural strain measurement by a 3 x 3 passive demodulated fiber optic interferometric sensor", SMART MATERIALS STRUCTURES, 8(4), pp.433~440, IOP PUBLISHING LTD
- T. Erdogan, "Fiber grating spectra", IEEE J, Lightwave technol., 15(8), pp.1277~1294 (1997)
- K.O.Hill, "Fiber bragg grating technology fundamentals and overview", IEEE J. Lightwave technol, 15(8), pp.1263~1276 (1997)
- 허진석, "광섬유 브래그 격자를 이용한 촉각센서용 유연 단위 힘 센서 개발", 센서학회지, 15(4), pp.251~256 (2006), 한국센서학회
- K.O.Hill, "Bragg gratings fabricated in monomode Photosensitive optical fiber by UV exposure through a phase mask", Appl. Phys. Lett, 62(10), pp.1035~1037 (1993)
- G. T. Jang, "A study on destructive pattern in FBG sensor application and variation of shear steel ratio by reinforced concrete beams", 석사, pp.2006