PMMA가 코팅된 주름 구조를 갖는 다공성규소 격판을 이용한 광섬유 압력센서
Fiber-Optic Pressure Sensor Using a Rugate-Structured Porous Silicon Diaphragm Coated with PMMA
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this research, fiber-optic pressure sensors were fabricated with rugate-structured porous silicon (RPS) diaphragms coated with PMMA (Polymethyl-Methacrylate). The reflectance spectrum of the PMMA/RPS diaphragm was almost the same as that of uncoated RPS diaphragm. However the mechanical strength of the PMMA/RPS diaphragm increased more than that of the uncoated diaphragm. As a result, the fiber-optic sensor fabricated with PMMA/RPS diaphragm could successfully detect more high pressure difference without diaphragm damage than the highest detectable pressure difference of the sensor with normal RPS diaphragm. The response data of the fiber-optic sensor recorded as a function of pressure difference were fitted by theoretical curves. During this process, elastic moduli of the used PMMA/RPS diaphragms were obtained numerically. The dynamic response properties of the fiber-optic sensor were also investigated under continuous variation of the pressure difference conditions.
Abstract
In this research, fiber-optic pressure sensors were fabricated with rugate-structured porous silicon (RPS) diaphragms coated with PMMA (Polymethyl-Methacrylate). The reflectance spectrum of the PMMA/RPS diaphragm was almost the same as that of uncoated RPS diaphragm. However the mechanical strength of the PMMA/RPS diaphragm increased more than that of the uncoated diaphragm. As a result, the fiber-optic sensor fabricated with PMMA/RPS diaphragm could successfully detect more high pressure difference without diaphragm damage than the highest detectable pressure difference of the sensor with normal RPS diaphragm. The response data of the fiber-optic sensor recorded as a function of pressure difference were fitted by theoretical curves. During this process, elastic moduli of the used PMMA/RPS diaphragms were obtained numerically. The dynamic response properties of the fiber-optic sensor were also investigated under continuous variation of the pressure difference conditions.
참고문헌 (13)
- L. Pancheri, "Very sensitive porous silicon NO2 sensor", Sens. Actator B-Chem, 89, pp.237~239 (2003)
- C. Baratto, "A novel porous silicon sensor for detection of subppm NO2 concentrations", Sens. Actuator B-Chem, 77, pp.62~66 (2001)
- S.-H. Park, "Organic vapor detection using a color-difference image technique for distributed Bragg reflector structured porous silicon", Sens. Actuator B-Chem, 147, pp.775~779 (2010)
- M. A. Parashchenko, "Electrical microchannel silicon sensor for solvent detection", XII International conference and seminar EDM'2011, pp.150~151 (2011)
- H. Ouyang, "Quantitative analysis of the sensitivity of porous silicon optical biosensors", Appl. Phys. Lett, 88, pp.163108-1~163108-3 (2006)
- S. Chan, "Nanoscale silicon microcavities for biosensing", Mater. Sci. Eng. C, 15, pp.277~282 (2001)
- K. S. Dancil, "A porous silicon optical biosensor: Detection of reversible binding of IgG to a protein A-Modified surface", J. Am. Chem. Soc, 121, pp.7925~7930 (1999)
- A. Jane, "Porous silicon biosensors on the advance", Trends Biotechnol, 27, pp.230~239 (2009)
- U. Gangopadhyay, "Porous Silicon as Pressure Sensing Material", Journal of the Korean Physical Society, 47(3), pp.450~453 (2005), 한국물리학회
- C. Pramanik, "Piezoresistive pressure sensing by porous silicon membrane", IEEE Sens. J, 6, pp.301~309 (2006)
- L. Sujatha, "Composite Si", PS membrane pressure sensors with micro and macroporous silicon, 2009, pp.34, 643~650
- S.-Y. Cho, "Rugate-structured free-standing porous siliconbased fiber-optic sensor for the simultaneous detection of pressure and organic gases", Sens. Actuator B-Chem, 183, pp.428~433 (2013)
- S. Ilyas, "Porous silicon based narrow line-width rugate filters", Opt. Mater, 29, pp.619~622 (2007)