금속 부품의 결함 판단을 위한 고유 주파수 분석 시스템 개발
Development of the Natural Frequency Analysis System to Examine the Defects of Metal Parts
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, we developed a system to detect the various defects in the metallic objects using the phenomenon that the defects cause the changes of the natural resonant frequencies. Our system consists of a FFT Amp, an Auto Impact Hammer, a Hammer controller and a PC. Auto Impact Hammer creates vibrations in the metallic objects when tapped on the surface. These vibrational signals are converted to the voltage signals by an acceleration sensor attached to the metallic part surface. These analog voltage signals were fed into an ADC (analog-digital converter) and an FFT (fast fourier transform) conversion in the FFT Amp to obtain the digital data in the frequency domain. Labview graphical program was used to process the digital data from th FFT amp to display the spectrum. We compared those spectra with the standard spectrum to find the shifts in the resonant frequencies of the metal parts, and thus detecting the defects. We used PCB’s acceleration sensor and TI’s TMS320F28335 DSP (digital signal processor) to obtain the resolution of 2.93 Hz and to analyze the frequencies up to 44 kHz.
Abstract
In this study, we developed a system to detect the various defects in the metallic objects using the phenomenon that the defects cause the changes of the natural resonant frequencies. Our system consists of a FFT Amp, an Auto Impact Hammer, a Hammer controller and a PC. Auto Impact Hammer creates vibrations in the metallic objects when tapped on the surface. These vibrational signals are converted to the voltage signals by an acceleration sensor attached to the metallic part surface. These analog voltage signals were fed into an ADC (analog-digital converter) and an FFT (fast fourier transform) conversion in the FFT Amp to obtain the digital data in the frequency domain. Labview graphical program was used to process the digital data from th FFT amp to display the spectrum. We compared those spectra with the standard spectrum to find the shifts in the resonant frequencies of the metal parts, and thus detecting the defects. We used PCB’s acceleration sensor and TI’s TMS320F28335 DSP (digital signal processor) to obtain the resolution of 2.93 Hz and to analyze the frequencies up to 44 kHz.
참고문헌 (15)
- D. C. Park, "Future Trend & Suggestion for vehicle noise &Vibration development", Trans. Korean Soc. Automot. Eng, 33(6), pp.18~23 (2011)
- 박주표, "디스크 정렬불량에 기인한 브레이크 스퀼소음의 실험해석", 한국자동차공학회 논문집, 12(5), pp.118~124 (2004), 한국자동차공학회
- 임재훈, "디스크 런아웃에 기인한 브레이크 스퀼소음", 한국자동차공학회 논문집, 13(3), pp.41~47 (2005), 한국자동차공학회
- H. J. Cho, "Analysis of the effect of mode shape on judder phenomenon in automotive disk brake", Trans. Korean Soc. Automot. Eng., 2, pp.1056~1061 (2005)
- 황호연, "고유진동수비 측정에 기초한 구조물 손상탐지", 한국항공우주학회지, 35(8), pp.726~734 (2007), 한국항공우주학회
- 윤한익, "크랙을 가진 회전 외팔보의 동특성 해석", 한국소음진동공학회논문집, 15(5), pp.620~628 (2005), 한국소음진동공학회
- Y. S. ryong, "Non-Destructive Test", pp.11~15 (2011), Sang Hakdang
- S. Seok, "Recent Research Trend for Nondestructive Testing Technology", J. Korean Soc. Nondestruct. test., 24(1), pp.64~85 (2004)
- 김종현, "원전 구조물 결함 탐지를 위한 음향방출 신호 처리 방안에 대한 기초 연구", 비파괴검사학회지, 29(5), pp.485~492 (2009), 한국비파괴검사학회
- H, Y, Hwang, "Damage detection of structure based on frequency response functions", J. of The Korea Society for Aeronautical & Space Sciences, 28(2), pp.46~57 (2000)
- 김훈, "강성기여도를 이용한 고유진동수 약산법", 대한건축학회논문집 구조계, 23(7), pp.3~10 (2007), 대한건축학회
- K. C. Lim, "A study on torsional stiffness improvement of a vehicle", T. of Korean Institute of Fire Sci. & Eng, 11(1), pp.47~54 (1997)
- C. O. Kim, "A study on the light control using DSP FFT processing module of audio and vibration signals", J. Korean Inst. Illum. Electr. Install. Eng., pp.81~83 (2011)
- 李在晟, "고속 FFT 연산을 위한 새로운 DSP 명령어 및 하드웨어 구조 설계", 전자공학회논문지 - SD, 39(11), pp.62~71 (2002), 대한전자공학회
- C. D. Lee, "Variability in the tensile properties of magnesium alloy on the microporosity variation", Trans. Korean Soc. Automot. Eng, 3(6), pp.1679~1684 (2007)