Structural Design and Analysis for 3D Ultrasonic Anemometer
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A 3D ultrasonic anemometer measures the direction and velocity of wind in a 3D space. The 2D ultrasonic anemometers developed by different manufacturers do not differ significantly in terms of their form or structure. The 3D ultrasonic anemometers, on the other hand, have more diverse forms than their 2D counterparts depending on the measurement algorithms and methods. Designing and reviewing the structure at the initial stage and defining its performance objectives are time-consuming processes. The process can be made cost-effective and time-saving if the validity is tested by model design and structural interpretation, and the structure is designed to withstand high wind velocities. This study presents the results of a 3D ultrasonic anemometer on real sample data by using a 3D modeling program, CATIA, for ultrasonic anemometer modeling.
Abstract
A 3D ultrasonic anemometer measures the direction and velocity of wind in a 3D space. The 2D ultrasonic anemometers developed by different manufacturers do not differ significantly in terms of their form or structure. The 3D ultrasonic anemometers, on the other hand, have more diverse forms than their 2D counterparts depending on the measurement algorithms and methods. Designing and reviewing the structure at the initial stage and defining its performance objectives are time-consuming processes. The process can be made cost-effective and time-saving if the validity is tested by model design and structural interpretation, and the structure is designed to withstand high wind velocities. This study presents the results of a 3D ultrasonic anemometer on real sample data by using a 3D modeling program, CATIA, for ultrasonic anemometer modeling.
참고문헌 (8)
- 이선길, "압전진동자를 이용한 초음파형 풍향풍속계", 센서학회지, 22(4), pp.292~296 (2013), 한국센서학회[DOI]
- W. -Y. Tsai, "An ultrasonic air temperature measurement system with self-correction function for humidity", Meas. Sci. Technol, 16(2), pp.548~555 (2005)
- C. Heechang, "Introduction to CATIA V5" (2002), Pearson Education Korea Ltd.
- J. Lee, "CFD Analysis of Unibaker Oven", J. Korea Acad. Indus. Cooper, 5(5), pp.371~376 (2004)
- 이종선, "밸브 수압측정기의 유동해석", 한국산학기술학회논문지, 13(5), pp.1963~1968 (2012), 한국산학기술학회[DOI]
- "ANSYS-CFX Ver. 11.0 Manual", ANSYS Inc, ~
- L. Svilainis, "Power amplifier for ultrasonic transducer excitation", Ultragarsas, 1(58), pp.30~36 (2006)
- J. A. Brown, "A low-cost, high performance pulse generator for ultrasound imaging", IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 49(6), pp.848~851 (2002)