광학적 pH 센서를 위한 지시염료가 고정된 필름의 광학적 특성 연구
Study on Optical Characteristics of pH Indicators in the Immobilized Film for Fiber-Optic pH Sensor
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The optical characteristics of cresol red, phenol red, and neutral red immobilized in the thin film were investigated with absorbance measurement in order to find a sensing part of a fiber-optic pH sensor. Sol-Gel method with tetramethyl orthosilicate as a precursor was used to immobilize the pH indicators in the thin film. The absorbance spectra were measured when pH indicators were immobilizedin the film and were dissolved in the buffer solution. Experimental results showed that the absorbance spectra could be changed whenthe pH indicator is immobilized in the thin film. As compared with other pH indicators, the neutral red exhibited similar absorbancespectra regardless of physical conditions and was sensitive over whole pH range between 4 and 11. In addition, the absorbance ratioof base peak to acid peak tended to increase in proportion to the increase in pH. Experimental results indicate that the neutral red is a good pH indicator for fabrication of a sensing part of the fiber-optic pH sensor.
Abstract
The optical characteristics of cresol red, phenol red, and neutral red immobilized in the thin film were investigated with absorbance measurement in order to find a sensing part of a fiber-optic pH sensor. Sol-Gel method with tetramethyl orthosilicate as a precursor was used to immobilize the pH indicators in the thin film. The absorbance spectra were measured when pH indicators were immobilizedin the film and were dissolved in the buffer solution. Experimental results showed that the absorbance spectra could be changed whenthe pH indicator is immobilized in the thin film. As compared with other pH indicators, the neutral red exhibited similar absorbancespectra regardless of physical conditions and was sensitive over whole pH range between 4 and 11. In addition, the absorbance ratioof base peak to acid peak tended to increase in proportion to the increase in pH. Experimental results indicate that the neutral red is a good pH indicator for fabrication of a sensing part of the fiber-optic pH sensor.
참고문헌 (11)
- J. Lin, "An optical pH sensor with a linear response over a broad range", Anal. Chem. Acta, 408, pp.49~55 (2000)
- F. Baldini, "In vivo monitoring of the gastrooesophageal system using optical fibre sensors", Anal. Bioanal. Chem, 375, pp.732~743 (2003)
- 이봉수, "내시경용 광섬유 pH측정 센서 개발을 위한 기초 연구", 센서학회지, 13(3), pp.213~217 (2004), 한국센서학회
- D. Wencel, "High performance optical ratiometric sol-gel based pH sensor", Sens. Actuators B, 139, pp.208~213 (2009)
- J. Goicoechea, "Optical fiber pH sensors based on layer-by-layer electrostatic self-assembled neutral red", Sens. Actuators B, 132, pp.305~311 (2008)
- Y. Huh, "Measurement of pH at elevated temperatures using the optical indicator acridine", J. Solution Chem, 22, pp.651~661 (1993)
- Eden J. Netto, "A fiber-optic broad-range pH sensor system for gastric measurements", Sens. Actuators B-Chem, 29, pp.157~163 (1995)
- P. K. Choudhury, "On the pH response of fiber optic evanescent field absorption sensor having a U-shaped probe : An experimental analysis", Optik, 114, pp.13~18 (2003)
- X. Yang, "Sol-gel matrix modified microstructured optical fibre towards a fluoride sensitive optical probe", Opt. Commun, 282, pp.2502~2505 (2009)
- 이정민, "실리카 졸-겔막을 이용한 pH 광학센서", 센서학회지, 13(3), pp.169~174 (2004), 한국센서학회
- B. Raghuraman, "Spectroscopic pH measurement for high temperatures, pressures and ionic strength", J. AIChe, 52(9), pp.3257~3265 (2006)