회전기기 실시간 동작상태 모니터링을 위한 자가발전 기반 센서모듈
Self-Powered Integrated Sensor Module for Monitoring the Real-Time Operation of Rotating Devices
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Rotating devices are commonly installed in power plants and factories. This study proposes a self-powered sensor node that is powered by converting the vibration energy of a rotating device into electrical energy. The self-powered sensor consists of a piezoelectric harvester for self-power generation, a rectifier circuit to rectify the AC signal, a sensor unit for measuring the vibration frequency, and a circuit to control the light emitting diode (LED) lighting. The frequency of the vibration source was measured using a piezoelectriccantilever-type vibration frequency sensor. A green LED was illuminated when the measured frequency was within the normal range. The power generated by the piezoelectric harvester was determined, and the LED operation was assessed in terms of the vibration frequency. The piezoelectric harvester was found to generate a power of 3.061 mW or greater at a vibration acceleration of 1.2 g (1 g =9.8 m/s2 ) and vibration frequencies between 117 and 123 Hz. Notably, the power generated was 4.099 mW at 122 Hz. As such, our self-powered sensor node can be used as a module for monitoring rotating devices, because it can convert vibration energy into electrical energy when installed on rotating devices such as air compressors.
Abstract
Rotating devices are commonly installed in power plants and factories. This study proposes a self-powered sensor node that is powered by converting the vibration energy of a rotating device into electrical energy. The self-powered sensor consists of a piezoelectric harvester for self-power generation, a rectifier circuit to rectify the AC signal, a sensor unit for measuring the vibration frequency, and a circuit to control the light emitting diode (LED) lighting. The frequency of the vibration source was measured using a piezoelectriccantilever-type vibration frequency sensor. A green LED was illuminated when the measured frequency was within the normal range. The power generated by the piezoelectric harvester was determined, and the LED operation was assessed in terms of the vibration frequency. The piezoelectric harvester was found to generate a power of 3.061 mW or greater at a vibration acceleration of 1.2 g (1 g =9.8 m/s2 ) and vibration frequencies between 117 and 123 Hz. Notably, the power generated was 4.099 mW at 122 Hz. As such, our self-powered sensor node can be used as a module for monitoring rotating devices, because it can convert vibration energy into electrical energy when installed on rotating devices such as air compressors.
참고문헌 (20)
- S. Priya, "Energy Harvesting Technologies", pp.3~39 (2009), Springer
- S. Roundy, "A study of low level vibrations as a power source for wireless sensor nodes", Comput. Commun., 26(11), pp.1131~1144 (2003)
- 김창일, "가로등 제어용 다층패드형 압전 하베스터의 개발 및 평가", 전기전자재료학회논문지, 29(11), pp.696~701 (2016), 한국전기전자재료학회[DOI]
- 김창일, "전력계통 구조물의 상태진단용 자가발전 무선 센서 노드 개발 및 평가", 센서학회지, 25(5), pp.371~376 (2016), 한국센서학회[DOI]
- W. Wu, "Tunable resonant frequency power harvesting devices", Proc SPIE, 6169, pp.61690A~ (2006)
- E. S. Leland, "Resonance tuning of piezoelectric vibration energy scavenging generators using compressive axial preload", Smart Mater Struct, 15(5), pp.1413~1420 (2006)
- Y. Hu, "A piezoelectric power harvester with adjustable frequency through axial preloads", Smart Mater Struct, 16(5), pp.1961~1966 (2007)
- C. Eichhorn, "A frequency tunable piezoelectric energy converter based on a cantilever beam", Proceedings of PowerMEMS, pp.309~312 (2008)
- T. Reissman, "Piezoelectric resonance shifting using tunable nonlinear stiffness", Proc SPIE, 7288, pp.72880G~ (2009)
- 김창일, "도로용 압전발전발판 설계 및 발전특성 평가", 전기전자재료학회논문지, 24(7), pp.554~558 (2011), 한국전기전자재료학회
- 김창일, "압전 캔틸레버 구조를 이용한 도로용 에너지 하베스터의 개발 및 평가", 전기전자재료학회논문지, 25(7), pp.511~515 (2012), 한국전기전자재료학회[DOI]
- 김창일, "압전 캔틸레버 구조와 차량하중 전달방법에 따른 도로용 에너지 하베스터의 설계 및 평가", 전기전자재료학회논문지, 25(10), pp.773~778 (2012), 한국전기전자재료학회[DOI]
- 백종후, "매설방법과 차량하중에 따른 벤더형 압전에너지 하베스터의 설계 및 평가", 전기전자재료학회논문지, 29(5), pp.274~278 (2016), 한국전기전자재료학회[DOI]
- J. H. Ryu, "Ubiquitous magneto-mechano-electric generator", Energy. Environ, Sci., 8(8), pp.2402~2408 (2015)
- V. Annapureddy, "Low-loss piezoelectric single-crystal fibers for enhanced magnetic energy harvesting with magnetoelectric composite", Adv. Energy Mater., 6(24), pp.1601244~ (2016)
- M. Ferrari, "Improved energy harvesting from wideband vibrations by nonlinear piezoelectric converters", Sens Actuators A, 162(2), pp.425~431 (2010)
- I. H. Kim, "Broadband energy-harvesting using a two degreeof-freedom vibrating body", Appl Phys Lett., 98(21), pp.214102~ (2011)
- A. Hajati, "Ultra-wide bandwidth piezoelectric energy harvesting", Appl Phys Lett., 99(8), pp.083105~ (2011)
- P. Pillatsch, "Self-tuning behavior of a clamped-clamped beam with sliding proof mass for broadband energy harvesting", J Physics : Conference Series, 476, pp.1~5 (2013)
- N. Aboulfotoh, "Experimental study on performance enhancement of a piezoelectric vibration energy harvester by applying selfresonating behavior", Energy Harvesting and Systems, 4(3), pp.131~136 (2017)