전기 방사 기반의 코발트 나노 섬유의 제작
Fabrication of Electrospun Cobalt Nanofiber
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Electrospinning method has easy preparation of nanofibers with a simple and versatile technique. Electrospun nanofiber is widely used by the simple approach and have great potentials in the numerous applicaitons of medicine, photonics, catalysts, sensors, etc. including advantage of their specific characteristics such as large surface to volume ratio. This paper focused on the fabrication of cobalt electrospun nanofibrer for applications such as electronic, optical and mechanical devices by metal based material. We fabricated cobalt nanofibers on aluminum foil by an electrospinning method. The electrospinning process was performed at a high voltage, 8 kV. The distance between the needle tip and the solution surface in the bath was 5 cm. The PVB - cobalt based nitrate solution was filled in a 10 mL syringe connected to a 22 gauge needle. We confirmed electrospun cobalt nanofiber after annealing process by SIMS (Secondary Ion Mass Spectrometry) analysis. The concept design, fabrication and results of mapping measurements are reported.
Abstract
Electrospinning method has easy preparation of nanofibers with a simple and versatile technique. Electrospun nanofiber is widely used by the simple approach and have great potentials in the numerous applicaitons of medicine, photonics, catalysts, sensors, etc. including advantage of their specific characteristics such as large surface to volume ratio. This paper focused on the fabrication of cobalt electrospun nanofibrer for applications such as electronic, optical and mechanical devices by metal based material. We fabricated cobalt nanofibers on aluminum foil by an electrospinning method. The electrospinning process was performed at a high voltage, 8 kV. The distance between the needle tip and the solution surface in the bath was 5 cm. The PVB - cobalt based nitrate solution was filled in a 10 mL syringe connected to a 22 gauge needle. We confirmed electrospun cobalt nanofiber after annealing process by SIMS (Secondary Ion Mass Spectrometry) analysis. The concept design, fabrication and results of mapping measurements are reported.
참고문헌 (15)
- D. Li, "Electrospinning of nanofibers : Reinventing the wheel?", Adv. Mater, 16, pp.1151~1170 (2004)
- R. Luoh, "Electrospun nanocomposite fiber mats as gas sensors", Compos. Sci. Technol, 66, pp.2436~2441 (2006)
- P. Li, "Electrospun nanofibers of polymer composite as a promising humidity sensitive material", Sens. Actuator B-Chem, 141, pp.390~395 (2009)
- T. J. Sill, "Electro spinning : applications in drug delivery and tissue engineering", Biomaterials, 29, pp.1989~2006 (2008)
- N. Tomczak, "Beaded electrospun fibers for photonic applications", Macromolecules, 38, pp.7863~7866 (2005)
- H. F. Jia, "Enzyme-carrying polymeric nanofibers prepared via electrospinning for use as unique biocatalysts", Biotechnol. Prog, 18, pp.1027~1032 (2002)
- H. Dong, "Synthesis and assembly of metal nanoparticles on electrospun poly(4-vinylpyridine)fibers and poly(4-vinylpyridine)composite fibers", Chem. Mater, 18, pp.2008~2011 (2006)
- M. Graeser, "Magnetically anisotropic cobalt and iron nanofibers via electrospinning", Adv. Mater, 19, pp.4244~4245 (2007)
- H. Wu, "Electrospinning of Fe, Co, and Ni nanofibers : Synthesis, assembly, and magnetic properties", Chem. Mater, 19, pp.3506~3511 (2007)
- M. Bognitzki, "Preparation of sub-micrometer copper fibers via electrospinning", Adv. Mater, 18, pp.2384~2385 (2006)
- J. I. Martin, "Ordered magnetic nanostructures : fabrication and properties", J. Magn. Magn. Mater, 256, pp.449~501 (2003)
- A. M. Morales, "A laser ablation method for the synthesis of crystalline semiconductor nanowires", Science, 279, pp.208~211 (1998)
- P. M. Ajayan, "Nanotubes from carbon", Chem. Rev, 99, pp.1787~1799 (1999)
- Q. Gu, "Cobalt metallization of DNA : toward magnetic nanowires", Nanotechnology, 16, pp.1358~1363 (2005)
- Q. Gu, "DNA nanowire fabrication", Nanotechnology, 17, pp.14~25 (2006)