플리커 방지를 위한 바이트반전 가시광통신 시스템에서 조명 제어 방법
Dimming Control Method in a Flicker-Free Byte-Inversion Visible Light Communication System
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, we introduce a new dimming control method in a visible light communication (VLC) system wherein byte- inversion is adopted for flicker-free transmission. In the VLC transmitter, the original and the inverted data were sent sequentially and the remnant time in one period was used for the dimming control of the LED light. In the VLC receiver, only the original data was recovered using the gating signal whose width was the same as the length of the original data. In our experiments, the dimming control ranges were measured to be 22%–53%, 11%–76%, and 5%–88% of the CW LED light when the data rates were 9.6, 19.2, and 38.4 kbps, respectively. In this system, we used a 240-Hz sync pulse whose period was 4.16 ms, which was shorter than the maximum flickering time period of 5 ms that is generally considered to be safe. This configuration is very simple and useful in constructing indoor wireless sensor networks using the flicker-free LED lamps with dimming control capability.
Abstract
In this paper, we introduce a new dimming control method in a visible light communication (VLC) system wherein byte- inversion is adopted for flicker-free transmission. In the VLC transmitter, the original and the inverted data were sent sequentially and the remnant time in one period was used for the dimming control of the LED light. In the VLC receiver, only the original data was recovered using the gating signal whose width was the same as the length of the original data. In our experiments, the dimming control ranges were measured to be 22%–53%, 11%–76%, and 5%–88% of the CW LED light when the data rates were 9.6, 19.2, and 38.4 kbps, respectively. In this system, we used a 240-Hz sync pulse whose period was 4.16 ms, which was shorter than the maximum flickering time period of 5 ms that is generally considered to be safe. This configuration is very simple and useful in constructing indoor wireless sensor networks using the flicker-free LED lamps with dimming control capability.
참고문헌 (8)
- T. Komine, "Fundamental analysis for visible-light communication system using LED lights", IEEE Trans. Consum. Electron., 50(1), pp.100~107 (2004)[DOI]
- Y. K. Cheong, "Hazardless biomedical sensing data transmission using VLC", IEEE Sens. J., 13(9), pp.3347~3348 (2013)[DOI]
- Z. Ong, "Long range VLC temperature monitoring system using CMOS of mobile device camera", IEEE Sens. J., 16(6), pp.1508~1509 (2016)[DOI]
- S. H. Lee, "A passive transponder for visible light identification using a solar cell", IEEE Sens. J., 15(10), pp.5398~5403 (2015)
- S. Rajagopal, "IEEE 802.15.7 visible light communication: modulation schemes and dimming support", IEEE Comm. Mag., 50(3), pp.72~82 (2012)
- X. Ma, "Appropriate modulation scheme for visible light communication systems considering illumination", Electron. Lett., 48(18), pp.1137~1139 (2012)[DOI]
- C. Yao, "Performance Comparison among ASK, FSK and DPSK in Visible Light Communication", Opt. Photon. J., 6(8B), pp.150~154 (2016)[DOI]
- 이성호, "바이트반전 전송방식을 이용한 플리커 방지 가시광통신시스템", 센서학회지, 26(6), pp.408~413 (2017), 한국센서학회[DOI]