탄환 충격파 측정용 방수 음향센서 개발
Development of Waterproof Acoustic Sensor for Shockwave Measurement
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In shooting training, an impact point identification system that uses the impact wave of the bullet to check the impact point in the target plate has been recently used. Acoustic sensors used in these systems must be able to detect shock waves of high sound pressure levels and be both waterproof and dustproof for rainy weather and dusty environments, respectively. In this study, membranes with excellent waterproof, dustproof, and sound transmitting characteristics were selected through a characteristics test; a protection cap was installed to install the selected materials. After coupling the produced protection cap to the acoustic sensor housing, the sensitivity and phase characteristics of the acoustic sensor were checked. Through the waterproof and dustproof test, the performances of its sensitivity and phase characteristics were confirmed. Finally, the normal shockwave of a 5.56 mm diameter bullet was measured using a shockwavedetection signal collecting plate equipped with a prototype of the acoustic sensor at a 100 m firing range.
Abstract
In shooting training, an impact point identification system that uses the impact wave of the bullet to check the impact point in the target plate has been recently used. Acoustic sensors used in these systems must be able to detect shock waves of high sound pressure levels and be both waterproof and dustproof for rainy weather and dusty environments, respectively. In this study, membranes with excellent waterproof, dustproof, and sound transmitting characteristics were selected through a characteristics test; a protection cap was installed to install the selected materials. After coupling the produced protection cap to the acoustic sensor housing, the sensitivity and phase characteristics of the acoustic sensor were checked. Through the waterproof and dustproof test, the performances of its sensitivity and phase characteristics were confirmed. Finally, the normal shockwave of a 5.56 mm diameter bullet was measured using a shockwavedetection signal collecting plate equipped with a prototype of the acoustic sensor at a 100 m firing range.
참고문헌 (8)
- D. Lindgren, "Shooter Localization in Wireless Microphone Networks", 12th Int. Conf. on Information Fusion, pp.1~8 (2009)
- J. George, "Shooter Localization using a Wireless Sensor Network of Soldier-Worn Gunfire Detection Systems", J. Adv. Inf. Fusion, 8(1), pp.15~32 (2013)
- R. C. Maher, "Modelling and signal processing of acoustic gunshot recordings", IEEE 12th Digit. Signal Process. Workshop, 4th IEEE Signal Process. Educ. Workshop, pp.257~261 (2006)
- Horman, B. Gil, "Sound Suppressors 101", American Rifleman (2013)
- R. C. Maher, "Deciphering gunshot recordings", 33rd Audio Eng. Soc. Int Conf., pp.1~8 (2008)