Quantitative Monitoring of Body Pressure Distribution Using Built-in Optical Sensors
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, body pressure was quantitatively detected using built-in optical sensors, inside an air cushion seat. The proposed system visualizes the effect of the body pressure distribution on the air cushion seat. The built-in sensor is based on the time-of-flight (ToF) optical method, instead of the conventional electrical sensor. A ToF optical sensors is attached to the bottom surface of the air-filled cells in the air cushion. Therefore, ToF sensors are durable, as they do not come in physical contact with the body even after repeated use. A ToF sensor indirectly expresses the body pressure by measuring the change in the height of the air-filled cell, after being subjected to the weight of the body. An array of such sensors can measure the body pressure distribution when the user sits on the air cushion seat. We implemented a prototype of the air cushion seat equipped with 7 ToF optical sensors and investigated its characteristics. In this experiment, the ToF optical pressure sensor successfully identified the pressure distribution corresponding to a sitting position. The data were accessed through a mobile device.
Abstract
In this study, body pressure was quantitatively detected using built-in optical sensors, inside an air cushion seat. The proposed system visualizes the effect of the body pressure distribution on the air cushion seat. The built-in sensor is based on the time-of-flight (ToF) optical method, instead of the conventional electrical sensor. A ToF optical sensors is attached to the bottom surface of the air-filled cells in the air cushion. Therefore, ToF sensors are durable, as they do not come in physical contact with the body even after repeated use. A ToF sensor indirectly expresses the body pressure by measuring the change in the height of the air-filled cell, after being subjected to the weight of the body. An array of such sensors can measure the body pressure distribution when the user sits on the air cushion seat. We implemented a prototype of the air cushion seat equipped with 7 ToF optical sensors and investigated its characteristics. In this experiment, the ToF optical pressure sensor successfully identified the pressure distribution corresponding to a sitting position. The data were accessed through a mobile device.
참고문헌 (10)
- M. Reddy, "Treatment of pressure ulcers : a systematic review", JAMA, 300(22), pp.2647~2662 (2008)
- W. Chang, "An enhanced sensing application based on a flexible projected capacitivesensing mattress", Sensors, 14(4), pp.6922~6937 (2014)
- S. Zhao, "A human body pressure distribution imaging system based on wavelet analysis and resistance tomography", Sensors, 17(11), pp.2634~2645 (2017)
- D. E. Gyi, "Seat pressure measurement technologies : considerations for their evaluation", Appl. Ergon, 29(2), pp.85~91 (1998)
- K. H. Lee, "Active body pressure relief system with Time-of-Flight optical pressure sensors for pressure ulcer prevention", Sensors, 19(18), pp.3862~3872 (2019)
- D. J. Webb, "Fibre bragg grating sensors in polymer optical fibres", Meas. Sci. Technol., 26(9), pp.092004(1)~092004(11) (2015)
- W. C. Wiley, "Time-of-Flight mass spectrometer with improved resolution", Rev. Sci. Instrum, 26, pp.1150~1157 (1955)
- "RS-485/RS-422 Circuit Implementation Guide"[URL]