본문 바로가기
KERD
논문KCI 등재

자체 감지능 및 작동기용 다기능 하이브리드 나노복합재료의 계면 특성 및 소수성 표면 연구

Interfacial Evaluation and Hydrophobicity of Multifunctional Hybrid Nanocomposites for Self-sensing and Actuation

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류재료공학

초록

니켈-나노분말/에폭시 복합재료의 계면 특성과 소수성을 자체-감지능과 작동기 측정을 위해 평가하였다. 경사형 시편을 사용하여 접촉 저항 및 저항도를 측정하였다. 자기장에서 복합재료의 작동성을 세가지 파형들, 즉, 싸인, 삼각, 그리고 사각파를 사용하여 평가하였다. 균일하지 않은 표면에 존재하는 소수성 영역 때문에 Ni-에폭시 나노복합재료의 어떤 부분은 초소수성보다는 다소 낮은 접촉각인 110도를 가졌다. 동적 접촉각은 정적 접촉각과 경향이 상호 일치함을 보였다. 니켈-나노분말의 고유의 금속성질 때문에 자체 감지를 확인하였으며, 또한 전자기장에 작동 반응을 잘 하였다. 니켈-나노분말/에폭시 복합재료의 최대 및 최적의 성능을 얻기 위해서, 레이져 변위 센서를 사용하여, 파형, 주파수, 그리고 전압의 함수로 작동기의 변위를 평가하였다. 니켈-나노분말/에폭시 복합재료의 작동은 적용된 주파수와 전압의 함수로써 증가하였다. 작동된 복합재료들의 연신율은 전압의 증가에 따라 삼각 혹은 사각파보다 싸인파에서 더욱 빨리 증가하였다.

Abstract

Interfacial evaluation and hydrophobicity of Ni-nanopowder/epoxy composites were investigated for self-sensing and actuation. Contact resistance and resistivity were measured using gradient micro-specimens. The actuation of the composites in the electromagnetic field was studied with three wave functions, i.e., sine, triangle and square functions. Due tothe presence of hydrophobic domains on the heterogeneous surface, the static contact angle of Ni-nanopowder/epoxy nanocomposite wasabout 110°, which was rather lower than that for super-hydrophobicity. The dynamic contact angle showed the similar trend of static contact angle. Ni-nanopowder/epoxy composite was responded wellfor both self-sensing and actuation in electromagnetic field due to the intrinsic metal property of Ni-nanopowder. Displacement of the actuator of Ni-nanopowder/epoxy composite was evaluated to obtain the maximum and the optimum performance using laser displacement sensor as functions of the wave type, frequency, and voltage. Actuation of Ni-nanopowder/epoxy composites also increased as functions of applied frequency and voltage. Actuated strain increased more rapidly at sine wave with increasing voltage compared to those of triangle or rectangular waves.

참고문헌 (15)

  1. S. J. Park, "Interfacial characteristics and fracture toughness of electrolytically Ni-plated carbon fiber-reinforced phenolic resin matrix composites", J. Coll. Interf. Sci., 237, pp.91~97 (2001)
  2. L. Jin, "Effect of electro-polymer sizing of carbon fiber on mechanical properties of phenolic resin composites", Trans. Nonferrous Met Soc, 16, pp.457~461 (2006)
  3. 김평기, "미세역학적시험법과 음향방출을 이용한 Jute 및 Hemp섬유", 폴리프로필렌복합재료의 내구성 및 계면 평가, 2007, pp.20(3), 55~62[DOI]
  4. X. Wang, "Improving the bond strength between carbon fiber and cement by fiber surface treatment and polymer addition to cement mix", Cem. Conc. Res., 26, pp.1007~1012 (1996)
  5. J. M. Park, "Interfacial properties of electrodeposited carbon fibers", epoxy composites using micromechanical technique and nondestructive evaluation, 2001, pp.237, 80~90
  6. N. Dilsiz, "Effect of acid-base properties of unsized and size carbon fibers on fiber", epoxy matrix adhesion, 2000, pp.164, 325~336
  7. J. M. Park, "Interfacial evaluation of single Ramie and Kenaf fiber", epoxy resin composites using micromechanical test and nondestructive acoustic emission, 2006, pp.13(2), 105~
  8. L.Yang, "Reversible Infrared Actuation of Carbon Nanotube-Liquid Crystalline Elastomer Nanocomposites", Adv.Mater, 9999, pp.1~5 (2008)
  9. G.R.Filho, "Application of the cuprammonium process(process for the production of regenerated cellulose membranes for hemodialysis)to sugar-cane bagasse", J.Memb.Sci., 82(1), pp.43~49 (1993)
  10. J.H.Kim, "Discovery of Cellulose as a Smart Material", Macromolecules, 39, pp.4202~4206 (2006)
  11. G. Y. Yun, "Effect of aligned cellulose film to the performance of electro-active paper actuator", Sens. Act. A, 141, pp.530~535 (2008)
  12. J.H.Kim, "Discovery of Cellulose as a Smart Material", Macromolecules, 39, pp.4202~4206 (2006)
  13. B.Claudia, "A method to characterize the deformation of an IPMC sensing membrane", Sens.Act.A, 123(124), pp.146~154 (2005)
  14. J. H. Lee, "Water uptake and migration effects of electroactive ion-exchange polymer metal composite (IPMC) actuator", Sens. Act. A, 118, pp.98~106 (2006)
  15. A. W. Adamson, "Physical and Chemistry of Surfaces, 5thed." (1990), Wiley Interscience

관련 논문AI추천

전기적 미세역학적 시험법을 이용한 Ni nanowire 강화 고분자 복합재료의 자체 감지능 및 계면 물성평가김성주, 박종만, 윤동진, George Hansen, K.Lawrence DeVries한국복합재료학회 · Composites Research2006 · 제19권 제5호자체-센서와 미세 작동기를 위한 CNT/PVDF 및 ITO/PVDF 나노복합재료의 전기적 및 계면 내구성 비교 평가구가영, 권동준, 박종만, 왕작가한국복합재료학회 · Composites Research2011 · 제24권 제6호형상비가 다른 Carbon Nannofiber/에폭시 복합재료의 자체 감지능 및 계면특성김성주, 김평기, 박종만, 왕악진, 윤동진, 장정훈한국접착및계면학회 · 접착 및 계면2008 · 제9권 제1호미세역학적 실험법과 젖음성을 이용한 CNT-에폭시 나노복합재료 경사형 시편의 계면특성공조엘, 박종규, 박종만, 왕작가, 이우일한국복합재료학회 · Composites Research2009 · 제22권 제5호젖음성 시험과 전기-미세역학 시험법과 통한 단 카본섬유/산처리된 CNT-에폭시 나노복합재료의 분산과 자체-감지능공조엘, 구가영, 박종규, 박종만, 왕작가, 이우일, 장정훈한국접착및계면학회 · 접착 및 계면2009 · 제10권 제2호전기저항측정법 및 젖음성을 이용한 나노복합재료의 미세파손 감지능 및 계면물성 평가권동준, 김종현, 박종만, 박하승, 백영민, 신평수한국복합재료학회 · Composites Research2017 · 제30권 제2호

이 간행물의 다른 논문 (5건)