보강재 본딩접합 복합재 적층판구조 피로손상 균열진전 수명예측에 대한 연구
A Study on Prediction of Fatigue Damage Crack Growth for Stiffener Bonded Composite Laminate Panel
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 적층판 시편의 피로손상 균열진전 시험결과와 적층보강판 구조의 응력강도 해석결과를 기초로 충격손상을 모사한 원공과 노치손상을 내재한 보강재 본딩접합 적층보강판 구조의 피로손상 균열진전 수명예측에 대하여 고찰하였다. 그리고 적층보강판 구조시편에 대한 손상허용 시험결과와 손상진전 수명예측 해석결과를 비교분석한 결과 손상균열 길이 변화에 따라 최종파단에 대한 잔여강도를 예측하고 손상허용성 평가를 할 수 있었다.
Abstract
The prediction and analysis procedure of fatigue damage crack growth life for a stiffener bonded composite laminate panel including center hole and edge notch damage, was studied. It was performed on the basis of fatigue damage growth test results on a laminated skin panel specimens and the analysis results of stress intensity factor for the stiffener bonded composite panel. According to the comparison between experimental test and prediction results of fatigue damage growth life, it was concluded that the residual strength and damage tolerance assessment can be carried out along to the edge notch crack growth.
참고문헌 (13)
- Kinsey, A., "Post-impact Compressive Behaviour of Low Temperature Curing Woven CFRP Laminates", Composite, 26(9), pp.661~667 (1995)
- Suh, S. S., "Compression Behaviour of Stitched Stiffened Panel with a Clearly Visible Stiffener Impact Damage", Composite Structures, 62(2), pp.213~221 (2003)
- Butler, R., "Compressive Fatigue Limit of Impact Damaged Composite Laminates", Composites Part A: Applied Science and Manufacturing, 38(4), pp.1211~1215
- Sabelkin, V., "Fatigue Crack Growth Analysis of Stiffened Panel Repaired with Bonded Composite Patch", Engineering Fracture Mechanics, 73(11), pp.1553~1567 (2006)
- Mouritz, A.P., "Tension Fatigue of Fiberdominated and Matrix-dominated Laminates Reinforced with Z-pins", International Journal of Fatigue, 32(4), pp.650~658 (2010)
- Attia, O., "The Prediction of Fatigue Damage Growth in Impact-damaged Composite Skin", stringer Structures, Part I: Theoritical Modelling Studies, 2003, pp.63(10), 1463~1472
- Kassapoglou, C., "Modeling Damage and Load Redistribution in Composites Under Tension-tension Fatigue Loading", Composites Part A: Applied Science and Manufacturing, 42(11), pp.1783~1792 (2011)
- Fracture Analysis of a Stiffened Structure, "Swift, T.", ASTM, 69~107, pp.STP 842 (1984)
- Damage Tolerance of Stiffened Skin Structures, "Vlieger, H.", ASTM, 169~219, pp.STP 969 (1988)
- Halpin, J. C., "Kinetic Fracture Models and Structural Reliability", International Journal of Fracture Mechanics, 8, pp.167~174 (1970)
- Plane Strain Crack Toughness Testing of High Strength Metallic Materials, "Brown, Jr. W. F.", ASTM, 12~, pp.STP 410 (1966)
- 권정호, "복소퍼텐셜을 이용한 타원공 또는 균열을 가진복합재 평판 응력해석", Composites Research, 20(5), pp.56~63 (2007), 한국복합재료학회
- Kwon, J. H., "Complex Potential Method for Stress Intensity Analysis in Stringer Bonded Composite Panel with Impact Damage", Pro. of Int. Symposium IFOST2010, 1 (2010)