열전달 촉진을 위한 탄소나노튜브(CNT)/금속 복합체 소결 코팅에 관한 연구
A Study on the Sinterning of the Carbon Nanotube/Metal Composites for the Heat Transfer Enhancement
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
냉매의 비등이나 응축같은 열전달 향상을 위하여 금속 표면위에 탄소나노튜브(CNT)를 코팅하는 것을 연구하였다. 다중벽 탄소나노튜브/구리 복합소재는 어트리션 볼밀에 의해서 제작되었으며, 정전 도장 장치로 복합분말을 구리 기판위에 코팅한 후 전기로에서 소결하였다. 본 논문에서는 CNT/Cu 코팅 표면의 분석 및 소결전후의 탄소나노튜브의 변화를 파악하기 위하여 샘플들을 주사전자현미경, EDAX, 라만분광법에 의해 분석하였다. 아울러 열전달 촉진은 비등열전달로 확인하였다.
Abstract
The coating of metal surface with carbon nanotubes (CNTs) has been studied for the heat transfer enhancement of the boiling and condensation of refrigerant. The MWCNT/copper composite powder was made by the attrition ball milling, which has been coated on the copper wafer by electrostatic powder coating and sintered with electric furnace. In this paper, experiments were performed to assess the characterization and comparison of CNT before and after sinterning and the morphology changes of the CNT/Cu-coated surface. The samples were examined by the scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDAX) and raman spectroscopy. To verify the heat transfer enhancement, boiling heat transfer tests were performed.
참고문헌 (15)
- Zhang, X. F., "Carbon Nano-tubes; Their Formation Process and Observation by Electron Microscopy", Journal of Crystal Growth, 130(3), pp.368~382 (1993)
- Pipes, R. B., "Helical Carbon Nanotube Arraysmechanical Properties", Composites Science and Technology, 62, pp.419~428 (2002)
- Delmotee, J. S., "M Echanical Properties of Carbon Nanotubes : A Fiber Digest for Beginners", Carbon, 40, pp.1729~1734 (2002)
- Kwon, H. S., "Combination of hot extrusion and spark plasma sintering for producing carbon nanotube reinforced aluminum matrix composites", CARBON, 47(3), pp.570~577 (2009), PERGAMON-ELSEVIER SCIENCE LTD
- Kim, P., "Thermal Transport Measurements of Individual Multiwalled Nanotubes", Physical Review Letters, 87, pp.1~4 (2001)
- Ujereh, S., "Effects of Carbon Nanotube Arrays on Nucleate Pool Boiling", International Journal of Heat and Mass Transfer, 50, pp.4023~4038 (2007)
- Khanikar, V., "Effects of Carbon Nanotube Coating on Flow Boiling in a Micro-channel", International Journal of Heat and Mass Transfer, 52, pp.3805~3817 (2009)
- He, X. Q., "Buckling Analysis of Multi-walled Carbon Nanotubes: A Continuum Model Accounting for Van Der Waals Interaction", Journal of the Mechanics and Physics of Solids, 53(2), pp.303~326 (2005)
- Datsyuk, V., "Chemical Oxidation of Multiwalled Carbon Nanotubes", Carbon, 46, pp.833~840 (2008)
- Yang, C. -Y., "Effect of Coating Layer Thickness for Boiling Heat Transfer on Micro Porous Coated Surface in Confined and Unconfined Spaces", Experimental Thermal and Fluid Science, 47, pp.40~47 (2013)
- Yang, C. -Y., "Pool Boiling of Refrigerants R-134a and R-404A on Porous and Structured Surface Tubes-Part II, Heat Transfer Performance", Journal of Enhanced Heat Transfer, 13, pp.65~84 (2006)
- Fan, C. -F., "Pool Boiling of Refrigerants R-134a and R-404A on Porous and Structured Tubes-Part I, Visualization of Bubble Dynamics", Journal of Enhanced Heat Transfer, 13, pp.85~97 (2006)
- Cieslinski, J. T., "Nucleate Pool Boiling on Porous Metallic Coatings", Experimental Thermal and Fluid Science, 25, pp.557~564 (2002)
- El-Genk, M. S., "Enhanced Nucleate Boiling on Copper Micro-porous Surfaces", International Journal of Multiphase Flow, 36, pp.780~792 (2010)
- Edward Joshua T. Pialago, "Nucleate Boiling Heat Transfer of R134a on Cold Sprayed CNT-Cu Composite Coatings", Applied Thermal Engineering, 56(1), pp.112~119 (2013)