복합재료구조물 거동 관찰을 위한 P(VDF-TrFE) 스마트센서의 기초연구
Basic Study on P(VDF-TrFE) Smart Sensor for Monitoring Composite Structure Behaviors
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Poly(vinylidene fluoride-trifluoroethylene; P(VDF-TrFE))는 여러 분야에서 다양한 형태로 활용되고 있는 유망한 전기활성고분자이다. 이 재료는 전기-기계적 특성을 가지고 있기 때문에 다양한 형태의 센서와 구동기로 활용되고 있으며, 복합재료 구조의 거동을 관찰하는 센서로도 활용이 가능하다. 본 논문에서는 세 가지 방법; (1) 전기적 폴링, (2) 어닐링-냉각, (3) 압축을 사용하여 P(VDF-TrFE) 공중합체 필름의 β 상 결정구조 향상시켜 센서로서의 특성을 강화하기 위한 연구를 수행하였다. P(VDF-TrFE) 필름에 대한 각 방법의 효과를 조사하기 위해 X-선 회절을 통한 미세구조분석을 수행하였다. 실험 결과, 전기적 폴링, 어닐링-냉각, 그리고 압축 방법 모두 P(VDF-TrFE) 필름의 β 상 결정구조 향상에 효과적이었으며 대조군 (45.29%)대비 최대 62.80%까지 β 상 결정도가 향상됐다.
Abstract
Poly(vinylidene fluoride-trifluoroethylene; P(VDF-TrFE)) is one of the most promising electroactive polymers with numerous application potentials in many fields of industry. Because of its good electro-mechanical properties P(VDF-TrFE) has been used for a number of sensors and actuators and also can be used for monitoring composite structure behaviors as a sensor. Three different ways (Electrical poling, annealing-cooling, and pressing) to enhance β-phase of P(VDF-TrFE) film were carried out. A microscopic analysis was conducted using X-ray diffraction to investigate the effect of such treatments on piezoelectric properties of P(VDF-TrFE) film. From the results, poling, annealing-cooling, and pressing were all effective to enhance β crystallinity of P(VDF-TrFE) film and the maximum increase rate was 62.80% from 45.29% of the control group.
참고문헌 (14)
- Sharma, T, "Flexible Thin-Film PVDF-TrFE Based Pressure Sensor for Smart Catheter Applications", Annals of Biomedical Engineering, 41(4), pp.744~751 (2013)
- Brodal, E, "Performance of an Ultrasonic Imaging System Based on a 45-MHz Linear PVDF Transducer Array: A Numerical Study", Advances in Acoustics and Vibration, 2011, pp.1~15 (2011)
- 구가영, "음향 작동기를 위한 투명한 xGnP", PVDF, Composites Research, pp.2012, 25(3)[DOI]
- Guzman, E, "Survivability of Integrated PVDF Film Sensors to Accelerated Ageing Conditions in Aeronautical, Aerospace Structures", Smart Materials and Structures, 22(6) (2013)
- Nilsson E, "Poling and Characterization of Piezoelectric Polymer Fibers for Use in Textile Sensors", Sensors and Actuators A, 201, pp.477~486 (2013)
- Gregorio, R, "Effect of Crystallization Temperature on the Crystalline Phase Content and Morphology of Poly(vinylidene Fluoride)", Journal of Polymer Science Part B: Polymer Physics, 32(5), pp.859~870 (1994)
- Matsushige, K, "Melting and Crystallization of Poly(vinylidene Fluoride) under High Pressure", Journal of Polymer Science: Polymer Physics Edition, 16(5), pp.921~934 (1978)
- Hindeleh, A.M, "Crystallinity and Crystallite Size Measurement in Polyamide and Polyester Fibres", Polymer, 19(1), pp.27~32 (1978)
- Hartono, A, "Effect of Mechanical Treatment Temperature on Electrical Properties and Crystallite Size of PVDF Film", Advances in Materials Physics and Chemistry, 3(1), pp.71~76 (2013)
- Zhang, Q.M, "Relaxor Ferroelectric Polymers", Ferroelectrics, 339, pp.37~45 (2006)
- Rollik, D, "Separate Contributions to the Pyroelectricity in Poly(vinylidene fluoride) from the Amorphous and Crystalline Phases, as Well as from Their Interface", Journal of Applied Physics, 85, pp.3282~3288 (1999)
- Su, H, "Density Functional Theory and Molecular Dynamics Studies of the Energetics and Kinetics of Electroactive Polymers: PVDF and P(VDF-TrFE)", Physical Review B, 70 (2004)
- Bohlén, M, "Effect of Single Wall Carbon Nanotubes on the Conformation of Poly(vinylidene fluoride)", Quantum Matter, 3(4), pp.339~343 (2014)
- Bohléen, M, "Conformational studies of Poly (vinylidene fluoride), Poly(trifluoroethylene) and Poly(vinylidene fluoride-co-trifluoroethylene) using Density Functional Theory", Physical Chemistry Chemical Physics, 16, pp.12929~12939 (2014)