High Temperature Thermo-mechanical Properties of HfC Reinforced Tungsten Matrix Composites
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In order to improve the mechanical properties of tungsten at room and elevated temperature, hafnium carbide (HfC) reinforced tungsten matrix composites were prepared using the spark plasma sintering technique. The effect of HfC content on the compressive strength and flexural strength of the tungsten composites was investigated. Mechanical properties of the composites were also measured at elevated temperatures and their trends, with varying reinforcement volume fraction, were studied. The effect of reinforcement fraction on the thermal properties of the composites was investigated. The thermal conductivity and diffusivity of the composites decreased with increasing temperature and reinforcement volume fraction. An inherently low thermal conductivity of the reinforcement as well as interfacial losses was responsible for lower values of thermal conductivity of the composites. Values of coefficient of thermal expansion of the composites were observed to increase with HfC volume fraction.
Abstract
In order to improve the mechanical properties of tungsten at room and elevated temperature, hafnium carbide (HfC) reinforced tungsten matrix composites were prepared using the spark plasma sintering technique. The effect of HfC content on the compressive strength and flexural strength of the tungsten composites was investigated. Mechanical properties of the composites were also measured at elevated temperatures and their trends, with varying reinforcement volume fraction, were studied. The effect of reinforcement fraction on the thermal properties of the composites was investigated. The thermal conductivity and diffusivity of the composites decreased with increasing temperature and reinforcement volume fraction. An inherently low thermal conductivity of the reinforcement as well as interfacial losses was responsible for lower values of thermal conductivity of the composites. Values of coefficient of thermal expansion of the composites were observed to increase with HfC volume fraction.
참고문헌 (27)
- Lee, J. M, "Advanced W-HfC Cermet Using In-situ Powder and Spark Plasma Sintering", Journal of Alloys and Compounds, 552, pp.14~19 (2013)
- Zhang, S. C, "Zirconium Carbide–Tungsten Cermets Prepared by In Situ Reaction Sintering", Journal of the American Ceramic Society, 90(07), pp.1930~1933 (2007)
- "ASM International Engineering Materials Handbook" (1991), ASM International
- Yih, S.W.H, "Tungsten-Sources, Metallurgy, Properties and Applications" (1979), Plenum Press
- Lassner, E, "Tungsten: Properties, Chemistry, Technology of the Element, Alloys, and Chemical Compounds" (1999), Plenum Publishers
- Opeka, M. M, "Mechanical, Thermal and Oxidation Properties of Refractory Hafnium and Zirconium Compounds", Journal of the European Ceramic Society, 19(13-14), pp.2405~2414 (1999)
- Liu, M, "Hafnium Carbide Growth Behavior and Its Relationship To The Dispersion Hardening in Tungsten at High Temperatures", Materials Science and Engineering, 160(2), pp.159~167 (1993)
- Development of High Temperature Materials for Solid Propellant Rocket Nozzle Applications, "Manning Jr, C.R", NASA, ~ (1974)
- El-Genk, M.S, "A Review of Refractory Metal Alloys and Mechanically Alloyed-Oxide Dispersion Strengthened Steels for Space Nuclear Power Systems", Journal of Nuclear Materials, 340(1), pp.93~112 (2005)
- Smid, I, "Development of Tungsten Armor and Bonding to Copper for Plasma-interactive Components", Journal of Nuclear Materials, 2598-2263(1), pp.160~172 (1998)
- Ozaki, Y, "High Temperature Diffusion of Hafnium in Tungsten and a Tungsten-hafnium Carbide Alloy", Scripta Materialia, 30(10), pp.1263~1267 (1994)
- Lou, A, "Tensile Properties of Tungsten-3.6% Rhenium-0.4% Hafnium Carbide above 0.5 Tm", Scripta Materialia, 23(3), pp.397~400 (1989)
- Lee, K. H, "Effect of Mechanical Alloying Process on Microstructure and Mechanical Properties of ODS Tungsten Heavy Alloys", Journal of Alloys and Compounds, 434, pp.433~436 (2007)
- Kim, Y, "Fabrication of High Temperature Oxides Dispersion Strengthened Tungsten Composites by Spark Plasma Sintering Process", International Journal of Refractory Metals and Hard Materials, 27(5), pp.842~846 (2009)
- Clyne, T.W, "An Introduction to Metal Matrix Composites" (1995), Cambridge University Press
- Teague, M. C, "Mechanical Properties of Reactively Processed W", Ta 2 C-based Composites, 2010, pp.30(11), 2197~2201
- Song, G. M, "Elevated Temperature Ablation Resistance and Thermophysical Properties of Tungsten Matrix Composites Reinforced With ZrC Particles", Journal of Materials Science, 36, pp.4625~4631 (2001)
- Chen, Y, "Microstructure and Mechanical Properties of Tungsten Composites Co-Strengthened by Dispersed TiCand La2O3 Particles", International Journal of Refractory Metals and Hard Materials, 26(6), pp.525~529 (2008)
- Rea, K. E, "Structure and Property Evaluation of a Vacuum Plasma Sprayed Nanostructured Tungsten–Hafnium Carbide Bulk Composite", Materials Science and Engineering: A, 447(1-2), pp.350~357 (2008)
- Klopp, W.D, "Strengthening of Molybdenum and Tungsten Alloys With HfC", J. Metals, 23(6), pp.27~38 (1971)
- Umer, M.A, "High Temperature Ablation Resistance of ZrNp Reinforced W Matrix Composites", International Journal of Refractory Metals and Hard Materials, 42, pp.17~22 (2014)
- Lee, D. J, "Elevated Temperature Ablation Resistance of HfC Particle-reinforced Tungsten Composites", International Journal of Refractory Metals and Hard Materials, 43, pp.89~93 (2014)
- Witzke, W.R, "The Effects of Composition on Mechanical Properties of W-4Re-Hf-C Alloys", Metallurgical Transactions, 5(2), pp.499~504 (1974)
- Song, G. M, "The Mechanical and Thermophysical Properties of ZrC", W Composites at Elevated Temperature, 2002, pp.334(1-2), 223~232
- Smid, I, "Development of Tungsten Armor and Bonding to Copper for Plasma-interactive Components", Journal of Nuclear Materials, 258, pp.160~172 (1998)
- Eckert, E.R.G, "Heat and Mass Transfer" (1959), McGraw-Hill
- Lee, S.H, "Thermal Conductivity of Tungsten–copper Composites", Thermochimica Acta, 542, pp.2~5 (2012)