Establishment of Aerospace Composite Materials Data Center for Qualification
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
It is well known that the polymer matrix composite materials have good specific strength, making them appropriate for use in transport vehicle. Since the property of composite materials can be obtained only after manufacturing parts, the property depends on greatly on the fabrication process, which is different from metallic system. Therefore, in order to use composite materials for aircraft, the certifying agency requires a robust database with extensive tests and proof of the process unlike metals. Recently developed material qualification methodology by NCAMP (National Center for Advanced Materials Performance) has been accepted by FAA and EASA and can be applied to type certificate reducing time and cost of developing a composite materials database for aircraft application. This paper summarizes a study to establish the composite materials database to apply the NCAMP methodology to composite materials characterization for composite aircraft and to provide the effective materials database through Aerospace Composite Materials Data Center to be approved by Korea Civil Aviation Certification Agency.
Abstract
It is well known that the polymer matrix composite materials have good specific strength, making them appropriate for use in transport vehicle. Since the property of composite materials can be obtained only after manufacturing parts, the property depends on greatly on the fabrication process, which is different from metallic system. Therefore, in order to use composite materials for aircraft, the certifying agency requires a robust database with extensive tests and proof of the process unlike metals. Recently developed material qualification methodology by NCAMP (National Center for Advanced Materials Performance) has been accepted by FAA and EASA and can be applied to type certificate reducing time and cost of developing a composite materials database for aircraft application. This paper summarizes a study to establish the composite materials database to apply the NCAMP methodology to composite materials characterization for composite aircraft and to provide the effective materials database through Aerospace Composite Materials Data Center to be approved by Korea Civil Aviation Certification Agency.
참고문헌 (32)
- Hale, J, "Aero Quarterly", Boeing.com, aeromagazine, pp.2006, 17~23
- Material Qualification and Equivalency for Polymer, Matrix Material Systems, "Tomblin, J.S", FAA, ~, pp.FAA Technical Report, DOT (2003), FAA[DOI]
- Tomblin, J, "Statement before the Subcommittee on Science", Technology & Space (2003), U.S. Senate Commerce Committee
- 이호성, "복합재료의 인증, 동등성 및 수락시험", Composites Research, 19(2), pp.1~6 (2006), 한국복합재료학회
- Ilcewicz, L, "Composite Safety and Certification Initiatives", 2012 Conference of Society of Advanced Materials and Process Engineering (2012)
- Ilcewicz, L, "Long-Term Planning Efforts", Executive Committee Meeting, 49th MIL-HDBK-17 Coordination Group Meeting (2005)
- Acceptance of Composite Specifications and Design Values Developed using the NCAMP Process, "FAA", FAA, ~, pp.FAA Memorandum AIR100-2010-120-003 (2010)
- Composite Materials-Shared Databases, Acceptance of Composite Specifications and Design Values Developed using the NCAMP Process, , European Aviation Safety Agency Certification Memoranda, ~, pp.EASA CM-S-004 Issue: 01 (2013)
- "U.S.-Korea, Revised the Bilateral Aviation Safety Agreement, Airworthiness Division, Ministry of Land, Infrastructure and Transport", Press Release, ~ (2014)
- "AC21-23B, November 17, 2004", Federal Aviation Administration, ~ (2004)
- Lee, H. -S, "A Case Study of Composite Materials Characterization for Certification", 2015 Conference of Society of Advanced Materials and Process Engineering (2015)
- "General Requirements for the Competence of Testing and Calibration Laboratories, International Organization for Standardization", ISO
- "AGATE-WP3.1-031200-130-Design Guideline", National Institute for Aviation Research, ~ (2002)
- , 59th Polymer Matrix Composites Coordination Group Meeting (2012)
- "Composite Materials Handbook-17-1G" (2012), SAE International
- NCAMP Qualification Training, "Ng, Y", Korea Aerospace Research Institute, ~ (2015)
- NCAMP Data Analysis Training, "Clarkson, E", Korea Aerospace Research Institute, ~ (2015)
- Davies, C.R, , FAA Workshop on Composite Material Control (2003)
- Ng, Y, "Differences between CMH-17 Rev G and NCAMP", 56th Polymer Matrix Composites Coordination Group Meeting (2010)
- Technical Report, “Development of Composite Materials Database and Data Sharing System for Small Aircraft”, Air Transportation Advancement Program of the Korea Institute of Construction & Transportation Technology Evaluation and Planning, "Technical Report", Korea Ministry of Land, Infrastructure and Transport, ~ (2015)
- "Guidance on Polymer Matrix Composite Systems Qualification" (2013), Korea Ministry of Land, Infrastructure and Transport
- Freeman, T, , 49th MIL-HDBK-17 Coordination Group Meeting (2005)
- Guidelines and Recommended Criteria for the Development of a Material Specification for Carbon Fiber, "Epoxy Unidirectional Prepregs", McCarvill, W, 2003, FAA Technical Report, DOT[DOI]
- Guidelines for the Development of Process Specifications, Instructions, and Controls for the Fabrication of Fiber-Reinforced Polymer Composites, "Bogucki, G", FAA, ~, pp.FAA Technical Report, DOT (2003), FAA[DOI]
- Notice of New, Renew, and Cancelation of National Standard Reference Data Center, , Korean Minister of Trade, Industry and Energy, ~, pp.Public Notice 2015-28 (2015)
- Composite Aircraft Structure, "FAA", FAA, ~, pp.FAA AC No: 20-107B (2009)
- , Proceedings of the 60th Polymer Matrix Composites Coordination Group Meeting (2015)
- Lee, H.-S, "Development of Materials Characterization Procedure for Composite Aircraft", Applied Mechanics and Materials, 325-326, pp.46~49 (2013)
- Tomblin, J, "A Composite Material Qualification Method That Results in Cost, Time and Risk Reduction", Proceedings of the 32nd International SAMPE Technical Conference (2000)
- Shyprykevich, P, "The Role of Statistical Data Reduction in the Development of Design Allowables for Composites, Test Methods for Design Allowables for Fibrous Composites", pp.111~135 (1989), American Society for Testing and Materials