Application of AE for Fracture Behavior Evaluation of Carbon-fiber/SiC Reinforced Plastic Composites
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, SiC powder was added to twill woven carbon fiber reinforced plastic (CFRP) composites to improve its mechanical properties. An acoustic emission (AE) frequency analysis method was suggested for the prediction of failure behaviors. Tensile tests were conducted and the fracture characteristics of each component of the SiC reinforced composite were evaluated using AE. The results showed that SiC powder improved the strength of twill woven CFRP composites and the fracture behavior of the SiC reinforced CFRP composite and its crack extension could be effectively evaluated on the basis of the specific AE frequency bands which are 100 to 228 kHz and 428 to 536 kHz upon the resin failure and 232 to 424 kHz due to addition of SiC powder and 576 to 864 kHz at the fiber breakage.
Abstract
In this study, SiC powder was added to twill woven carbon fiber reinforced plastic (CFRP) composites to improve its mechanical properties. An acoustic emission (AE) frequency analysis method was suggested for the prediction of failure behaviors. Tensile tests were conducted and the fracture characteristics of each component of the SiC reinforced composite were evaluated using AE. The results showed that SiC powder improved the strength of twill woven CFRP composites and the fracture behavior of the SiC reinforced CFRP composite and its crack extension could be effectively evaluated on the basis of the specific AE frequency bands which are 100 to 228 kHz and 428 to 536 kHz upon the resin failure and 232 to 424 kHz due to addition of SiC powder and 576 to 864 kHz at the fiber breakage.
참고문헌 (12)
- Mahieux, C. A., "Cost Effective Manufacturing Process of Thermoplastic Matrix Composites for the Traditional Industry : the Example of a Carbon-fiber Reinforced Thermoplastic Flywheel", Composite Structure, 52, pp.517~521 (2001)
- Dlugosch, M., "Experimental Investigation of Hybrid Material Systems Considering of Advanced Composites and Sheet Metal", Composite Structures, 152, pp.840~849 (2016)
- Yoon, H. K., "A Study on Fatigue Life of Al 7075", CFRP Multilayered Hybrid Composite Materials, 1996, pp.10(4), 92~102
- 이진경, "Al 7075", CFRP 하이브리드 복합재료의 미시적 파괴특성에 대한 AE특성평가, 2002, pp.15(5), 1~6[DOI]
- Kwon, D.J., "Improvement of Mechanical and Interfacial Properties of Carbon Fiber", epoxy Composites by Adding Nano SiC Fillers, 2013, pp.14(2), 75~81
- Johny, J. S., "Hybrid Aluminium Metal Matrix Composites Reinforced with SiC and TiB2", Proceeding Engineering, 97, pp.1018~ (2014)
- 윤유성, "DCB 시험편의 평직 CFRP 복합재 층간파괴인성 및 AE 특성 평가", 한국안전학회지, 20(1), pp.49~54 (2005), 한국안전학회
- Jose, M. J., "Real-time Damage Mechanism Assessment in CFRP Samples via Acoustic Emission Lamb Wave Modal Analysis", Composites B, 36, pp.317~326 (2015)
- Fotouhi, M., "Detection of Fiber Fractures and Ply Fragmentation in Thin-ply UD Carbon", glass Hybrid Laminates Using Acoustic Emission, 2016, pp.86, 66~76
- "E 399, Standard Test Method for Plane Strain Fracture Toughness of Metallic Materials", ASTM, ~ (1997)
- "D 3039, Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials", ASTM, ~ (2006)
- Matsuo, T., "Development of AE Monitoring System with Noise Reduction Function by Spectral Subtraction", Materials Transactions, 53(2), pp.342~348 (2012)