도파민이 첨가된 에폭시 기지재의 기계적 물성 및 유리섬유 간 계면접착력 향상
Epoxy Matrix with Adding Dopamine for Improving Mechanical Property and Interfacial Adhesion with Glass Fiber
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
섬유와 수지 간 계면접착력은 복합재료 성능과 관련되므로 이를 정확하게 평가하는 것은 매우 중요하다. 본 연구에서는, 피로 하중 조건에서의 마이크로드롭렛 실험에 의한 계면접착력 평가를 실시하였다. 도파민이 적용된 에폭시 수지에 대하여 기계적 물성 및 계면접착력을 측정하였다. 기계적 물성을 평가하기 위해 인장 시편을 제작하였고, 계면 접착력 평가를 위하여 유리섬유에 에폭시 마이크로드롭렛을 만든 시편을 사용하였다. 특히 마이크로드롭렛 피로 실험 시 동일한 직경의 마이크로드롭렛을 사용하여 동일한 조건에서 실험하였다. 그 결과 인장 및 마이크로드롭렛 실험을 통해 에폭시 수지에 도파민이 적용될 때 기계 및 계면접착력이 향상됨을 확인하였다. 도파민이 에폭시 수지의 경화정도를 향상시키고 에폭시 수지에 하이드록실 그룹을 부여하여 기계적 물성 및 유리섬유 간 계면 접착력을 증가시켰을 것으로 사려된다.
Abstract
Interfacial adhesion between fiber and resin are related to composites performance, so it is very important to evaluate them accurately. In this study, the interfacial properties of microdroplets under fatigue loading conditions were evaluated. The mechanical properties and interfacial adhesion of epoxy resin with dopamine were studied. Tensile specimens were prepared to evaluate mechanical properties and epoxy microdroplets specimens were used for the evaluation of interfacial adhesion. In addition, in the microdroplet fatigue test, the same diameter of the microdroplet was used and the experiment was performed under the same conditions. As a result, it was confirmed that mechanical and interfacial properties were improved when dopamine was applied to epoxy resin through tensile and microdroplet experiments. It is considered that dopamine improves the degree of curing of the epoxy resin and imparts hydroxyl groups to the epoxy resin to increase the mechanical properties and the interfacial adhesion between the glass fibers.
참고문헌 (17)
- 권동준, "Capacitance 측정법을 이용한 나노 SiC 에폭시 복합재료의 내부 강화재 분산 예측방법", Composites Research, 26(6), pp.337~342 (2013), 한국복합재료학회
- Gellert, E. P., "Seawater Immersion Ageing of Glass-Fibre Reinforced Polymer Laminates for Marine Applications", Composites : Part B, 30, pp.1259~1265 (1999)
- Kootsookos, A., "Seawater Durability of Glass and Carbon-Polymer Composites", Composites Sience and Technology, 64, pp.1503~1511 (2004)
- 양현정, "서로 다른 수분율을 갖도록 염수환경에 노출된 복합재 접착체결부의 강도", Composites Research, 24(4), pp.48~54 (2011), 한국복합재료학회
- 전광우, "철도차량 대차 적용 유리섬유", 에폭시 4-매 주자직 적층 복합재의 인장-압축 피로특성 평가 연구, 2010, pp.23(5), 22~29[DOI]
- Shaoquan, W., "Thermal Ageing Effects on Mechanical Properties and Barely Visible Impact Damage Behavior of a Carbon Fiber Reinforced Bismaleimide Composite", Materials and Design, 115, pp.213~223 (2017)
- Mansouri, L., "Effect of Hygrothermal Aging in Distilled and Saline Water on the Mechanical Behaviour of Mixed Short Fibre", Woven Composites, 2019, pp.207, 816~825
- Moreno, D.D.P., "Accelerated Aging of Pine Wood Waste", Recycled LDPE Composite, 2018, pp.149, 39~44
- Park, J. M., "Interfacial Evaluation of Modified Jute and Hemp Fibers", Polypropylene(PP)-maleic Anhydride Polypropylene Copolymers(PP-MAPP)Composites Using Micromechanical Technique and Nondestructive Acoustic Emission, 2006, pp.66, 2686~2699
- Cho, B. G., "The Effects of Plasma Surface Treatment on the Mechanical Properties of Polycarbonate", Carbon Nanotube, Composites Part B : Engineering, pp.2019, 160[DOI]
- Lee, W., "Catecholamine Polymers as Surface Modifiers for Enhancing Interfacial Strength of Fiberreinforced Composites", Composites Science and Technology, 110, pp.53~61 (2015)
- Zhong, Y., "A Mussel-inspired Carboxymethyl Cellulose Hydrogel with Enhanced Adhesiveness Through Enzymatic Crosslinking", Colloids and Surface B : Biointerface, 179, pp.462~469 (2019)
- Rovol, B. P., "Single Fibre Model Composite: Interfacial Shear Strength Measurements between Reactive Polyamide-6 and Cellulosic or Glass Fibres by Microdroplet Pullout Test", Composites Science and Technology, 148, pp.9~19 (2017)
- Aljawish, A., "Enzymatic Synthesis of Chitosan Derivatives and Their Potential Applications", Journal of Molecular Catalysis B : Enzymatic, 112, pp.25~39 (2015)
- Sa, R., "Catechol and Epoxy Functionalized Ultrahigh Molecular Weight Polyethylene(UHMWPE)Fibers with Improved Surface Activity and Interfacial Adhesion", Composites Science and Technology, 113, pp.54~62 (2015)
- Park, J. M., "Optimum Dispersion Conditions and Interfacial Modification of Carbon Fiber and CNT–phenolic Composites by Atmospheric Pressure Plasma Treatment", Composites Part B : Engineering, 43, pp.2272~2278 (2012)
- Liu, Y., "Significantly Enhanced Thermal Conductivity in Polyvinyl Alcohol Composites Enabled by Dopamine Modified Graphene Nanoplatelets", Composites Part A : Applied Science and Manufacturing, 117, pp.134~143 (2019)