본문 바로가기
KERD
논문KCI 등재

고속 열 성형 유한요소해석을 활용한 CF/PEKK 열가소성 복합재 구조물 제작 공정 예측 및 검증

Evaluation of Stamp Forming Process Parameters for CF/PEKK Thermoplastic Composite Using Finite Element Method

최현석|이준성|남영우|주현우|권진회|이경인|곽준우
한국복합재료학회 (The Korean Society For Composite Materials)|2021.11|Composites Research|제34권 제5호|pp. 296-304|DOI https://doi.org/10.7234/composres.2021.34.5.296

2

조회

0

다운로드

1

인용

0

참고문헌

키워드

Crystallinity결정화도기공률Forming simulationThermoplastic composite성형 해석열가소성 복합재고속 열 성형 공정Void contentStamp forming process
주제분류재료공학

초록

본 연구에서는 유한요소법(FEM)에 기반한 CF/PEKK 열가소성 복합재 고속 열 성형 해석을 수행하였고 제작 공정을 예측 및 검증하였다. 대표적인 L 형 구조물 모델에 대해 트리밍 여유에 따른 성형성을 응력, 두께, 주름 분포를 분석하였다. 그 결과, 블랭크의 트리밍 여유가 증가할수록 구조물의 성형성이 향상하는 것을 확인하였다. 특히 두께 및 주름 분포 측면에서 해석 모델과 실험 결과를 비교하여서 고속 열 성형 모델의 타당성을 검증하였다. 제작된 구조물은 시차 주사 열량 분석법 및 이미지 분석법을 통해 결정화도와 기공률이 측정되었다. 제작된 열가소성 구조물의 전 영역 기공률은 평균 0.75%, 결정화도는 약 21%로 항공기에 적용 가능한 수치로 평가되었다. 따라서 본 연구를 토대로 열가소성 복합재 고속 열 성형 공정에 대해 효과적인 예측이 가능할 것으로 판단된다.

Abstract

This study presented the evaluation of the stamp forming process for L-shape CF/PEKK thermoplastic composite using the finite element model. The formability of three different trimming allowances has been examined for representative product geometry. The results showed that those manufactured by high trimming allowance showed more excellent formability in those areas. Moreover, the effects of the trimming allowances on the stress, thickness, wrinkle distributions of thermoplastic composites fabricated with the stamp forming process were evaluated. The comparison of the simulation and experimental results for the thickness and wrinkle distributions proved the accuracy of the stamp forming model. The crystallinity of the composite was performed by differential scanning calorimetry (DSC). The void content of the composite was evaluated by matrix digestion. Then, the fabricated structure was characterized and achieved high quality in crystallinity and void content. Consequently, the presented FEM modeling shows excellent potential for application in the aircraft product design process. This pragmatic approach could efficiently offer a valuable solution for the thermoplastic composite manufacturing field.

참고문헌 (50)

  1. Henning, F., "Fast Processing and Continuous Simulation of Automotive Structural Composite Components", Composites Science and Technology, 171, pp.261~279 (2019)
  2. Jung-Min Lee, "Design of Prepreg Compression Molding for Manufacturing of CFRTP B-pillar Reinforcement with Equivalent Mechanical Properties to Existing Steel Part", International Journal of Precision Engineering and Manufacturing, 21(3), pp.545~556 (2020), 한국정밀공학회[DOI]
  3. Vieille, B., "About the Influence of Stamping on Thermoplastic-based Composites for Aeronautical Applications", Composites Part B : Engineering, 45(1), pp.821~834 (2013)
  4. Suemasu, H., "On Deformation of Woven Fabric-Reinforced Thermoplastic Composites During Stamp-forming", Composites Manufacturing, 5, pp.31~39 (1994)
  5. Trudel-Boucher, D., "Experimental Investigation of Stamp Forming of Unconsolidated Commingled E-glass", polypropylene Fabrics, 2006, pp.66, 555~570
  6. Lebrun, G., "Thermoforming-Stamping of Continuous Glass Fiber", Polypropylene Composites : Interlaminar and Tool-Laminate Shear Properties, 2004, pp.17, 137~165
  7. Ning, H., "Design, Manufacture and Analysis of a Thermoplastic Composite Frame Structure for Mass Transit", Composite Structures, 80, pp.105~116 (2007)
  8. Gorczyca-Cole, J. L., "A Friction Model for Thermostamping Commingled Glass-polypropylene Woven Fabrics", Composites Part A : Applied Science and Manufacturing, 38, pp.393~406 (2007)
  9. Gorczyca, J., "Modeling of Friction and Shear in Thermostamping of Composites-Part I", Journal of Thermoplastic Composite Materials, 38, pp.1911~1929 (2004)
  10. Wakeman, M. D., "Void Evolution During Stamp Forming of Thermoplastic Composites", 15th International Conference on Composite Materials (2005)
  11. 12 Carbon, "Polyether Ether Ketone Laminate", Composites Part A : Applied Science and Manufacturing, 70, pp.59~68 (2015)
  12. Liu, L., "Friction and Shear in Thermostamping of Composites—Part II", Journal of Thermoplastic Composite Materials, 38 (2004)
  13. Mallick, P.K, "Thermoplastics and Thermoplastic-matrix Composites for Lightweight Automotive Structures", Materials, Design and Manufacturing for Lightweight Vehicles, pp.187~228 (2021)
  14. Mathijsen, D., "The Black Magic of Carbon Fiber Reinforced Thermoplastics", Reinforced Plastics, 59(4), pp.185~189 (2015)
  15. Harrison, P., "Press Forming a 0", 90 Cross-ply Advanced Thermoplastic Composite Using the Double-dome Benchmark Geometry, 2013, pp.54, 56~69
  16. Ten Thije, R. H. W., "A Lubrication Approach to Friction in Thermoplastic Composites Forming Processes", Composites Part A : Applied Science and Manufacturing, 42, pp.950~960 (2011)
  17. Hallander, P., "An Experimental Study of Mechanisms Behind Wrinkle Development during Forming of Composite Laminates", Composites Part A : Applied Science and Manufacturing, 50, pp.54~64 (2013)
  18. Slange, T. K., "Influence of Prepreg Characteristics on Stamp Consolidation", AIP Conference Proceedings, 1896, pp.030034~ (2017)
  19. Gabrion, X., "About the Thermomechanical Behaviour of a Carbon Fibre Reinforced High-temperature Thermoplastic Composite", Composite B : Engineering, 95, pp.386~394 (2016)
  20. Schneeberger, C., "Hybrid Bicomponent Fibres for Thermoplastic Composite Preforms", Composite A : Applied Science and Manufacturing, 103, pp.69~73 (2017)
  21. Boisse, P., "Modelling the Development of Defects During Composite Reinforcements and Prepreg Forming", Philosophical Transactions Mathematical Physical and Engineering Sciences, 374(2071), pp.20150269~ (2016)
  22. Kiran, G. B., "A Study on the Influence of Hot Press Forming Process Parameters on Mechanical Properties of Green Composites Using Taguchi Experimental Design", International Journal of Engineering, Science and Technology, 3, pp.253~263 (2011)
  23. n Carbon, "Peek Laminates : Influence of Support Configuration and Demolding Temperature on Part Consolidation", Polymer Composites, 39, pp.3341~3352 (2018)
  24. Behrens, B. A., "Automated Stamp Forming of Continuous Fiber Reinforced Thermoplastics for Complex Shell Geometries", Procedia CIRP, 66, pp.113~118 (2017)
  25. Balakrishnan, V. S., "Influence of Metal Surface Preparation on the Flexural Strength and Impact Damage Behaviour of Thermoplastic FRP Reinforced Metal Laminate Made by Press Forming", Composites Part B : Engineering, 173, pp.106883~ (2019)
  26. Donadei, V., "Effects of Blank Quality on Press-Formed PEKK", Carbon Composite Parts, 2018, pp.11, 1063~
  27. Xiong, H., "Consolidation Modeling during Thermoforming of Thermoplastic Composite Prepregs Hu", Matrials, 12(18), pp.2853~ (2019)
  28. Gong, Y., "A Comprehensive Review of Characterization and Simulation Methods for Thermo-stamping of 2D Woven Fabric Reinforced Thermoplastics", Composites Part B : Engineering, 203, pp.108462~ (2020)
  29. Behrens, B. A., "Forming Sheets of Metal and Fibre-reinforced Plastics to Hybrid Parts in One Deep Drawing Process", Procedia Engineering, 81, pp.1608~1613 (2014)
  30. Vieille, B., "Investigations on Stamping of C", PEEK Laminates : Influence on Meso-structure and Macroscopic Mechanical Properties under Severe Environmental Conditions, 2014, pp.63, 101~110
  31. Hwang, S. F., "Stamp Forming of Locally Heated Thermoplastic Composites", Composites Part A : Applied Science and Manufacturing, 33, pp.669~676 (2002)
  32. Fernández, I., "Autoclave Forming of Thermoplastic Composite Parts", Journal of Materials Processing Technology, 143-144, pp.266~269 (2003)
  33. Abbassi, F., "Experimental and Numerical Investigations of a Thermoplastic Composite(carbon", PPS)Thermoforming, 2011, pp.18, 769~780
  34. Guzman-Maldonado, E., "Experimental and Numerical Analysis of Wrinkling during Forming of Multi-layered Textile Composites", Composite Structures, 208, pp.213~223 (2019)
  35. Kim, D. J., "Prediction of the Mechanical Behavior of Fiber-reinforced Composite Structure Considering Its Shear Angle Distribution Generated during Thermo-compression Molding Process", Composite Structures, 220, pp.441~450 (2019)
  36. Donderwinkel, T. G., "Stamp Forming Optimization for Formability and Crystallinity", AIP Conference Proceedings, 1769, pp.170029~ (2016)
  37. Montazerian, H., "Digital Twining of an Automated Fabric Draping Process for Industry 4.0 Applications:Part Imulti-body Simulation and Finite Element Modeling", CAMX2019, pp.1~10 (2019)
  38. Chen, Q., "Intra", inter-ply Shear Behaviors of Continuous Fiber Reinforced Thermoplastic Composites in Thermoforming Processes, 2011, pp.93, 1692~1703
  39. Allaoui, S., "Experimental and Numerical Analyses of Textile Reinforcement Forming of a Tetrahedral Shape", Composites Part A : Applied Science and Manufacturing, 42, pp.612~622 (2011)
  40. Wolthuizen, D. J., "Forming Limits of Thermoplastic Composites", Key Engineering Materials, 611-612, pp.407~414 (2014)
  41. Slange, T. K., "Towards the Combination of Automated Layup and Stamp Forming for Consolidation of Tailored Composite Components", Composites Part A : Applied Science and Manufacturing, 119, pp.165~175 (2019)
  42. McCool, R., "Thermoforming Carbon Fibrereinforced Thermoplastic Composites", Journal of Materials : Design & Applications, 226, pp.91~102 (2012)
  43. Slange, T. K., "Influence of Preconsolidation on Consolidation Quality After Stamp Forming of C", PEEK Composites, 2016, pp.1769, 170022~
  44. 전용준, "굴삭기 요소수 탱크 커버의 신규 모델 개발을 위한 CAE 기반 프레스 성형 공정 설계", Design & Manufacturing, 14(2), pp.49~55 (2020), 한국금형공학회[DOI]
  45. Haanappel, S. P., "Formability Analyses of Uni-directional and Textile Reinforced Thermoplastics", Composites Part A : Applied Science and Manufacturing, 56, pp.80~92 (2014)
  46. Vanclooster, K., "Experimental Validation of Forming Simulations of Fabric Reinforced Polymers Using an Unsymmetrical Mould Configuration", Composites Part A : Applied Science and Manufacturing, 40, pp.530~539 (2009)
  47. Lee, J. S., "The Effect of Blank Holder Force on the Stamp Forming Behavior of Noncrimp Fabric with a Chain Stitch", Composites Science and Technology, 67, pp.357~366 (2007)
  48. TORAY Cetex, "Stamp Forming Processing Guide", TORAY Cetex, ~ (2019)
  49. Aniform, "Toray Cetex® TC1320 AS4D", PEKK Material Card, the netherlands, 2019
  50. "ASTM D3418, Standard Test Method for Transition Temperatures of Polymers by Differential Scanning Calorimetry", ~

관련 논문AI추천

다관절 로봇 암 기반 고속 열 성형 공정을 활용한 열가소성 복합재 부품 평가곽병수, 권진회, 남영우, 노지섭, 박규범, 석창민, 신호영한국복합재료학회 · Composites Research2023 · 제36권 제5호핫프레스 공정 기반 CF-PEKK 복합재의 근적외선 고속가열에 의한 열적 열화 반응의 메커니즘 분석김윤해, 박성재, 박수정, 박예림, 이교문한국복합재료학회 · Composites Research2022 · 제35권 제2호열가소성 복합재의 열성형 변형 예측 연구 동향김동협, 김상우, 김솔미, 이수용한국복합재료학회 · Composites Research2024 · 제37권 제4호CF/LMPAEK 열가소성 Blank의 비접촉 유도 가열을 활용한 동시 성형 접합 공정 및 기계적 물성 평가남영우, 소기성, 이현정, 임채환, 장한나, 최완규한국복합재료학회 · Composites Research2025 · 제38권 제3호유한요소해석 기반 CFRTP 열성형 공정유도 변형 예측과 주요 공정 변수의 영향 평가김동협, 김상우, 김솔미, 이수용한국복합재료학회 · Composites Research2025 · 제38권 제4호탄소 섬유 프리프레그의 압축 물성을 고려한 복합재 고온 압축 성형해석 평가배대령, 엄문광, 이정완, 이진우한국복합재료학회 · Composites Research2018 · 제31권 제6호

이 간행물의 다른 논문 (9건)

속경화용 탄소섬유/에폭시 프리프레그의 다단 압축 성형기술김태용, 김병하, 문지훈, 권순덕, 곽성훈, 홍상휘pp. 269-276초임계유체 조건에서 제조된 그래핀의 구조분석과 그래핀/에폭시 수지조성물의 열전도 특성최규연, 오원태pp. 277-282초기 결함 조건 모델에 따른 복합재 원통 구조의 좌굴 Knockdown factor 도출박재상, 윤영하, 김도영, 심창훈, 유준태, 이기주pp. 283-289탄소섬유 직물 및 전도성 탄소 필러가 고충진 된 열가소성 탄소섬유강화플라스틱의 전도 특성최성규, 장지운, 김성륜, 노예지pp. 290-295Capillary 특성을 활용한 섬유 조건에 따른 유리섬유강화 복합재료의 함침성 및 계면강도 평가권동준, 박종만, 김종현pp. 305-310
원문 보기