탄소섬유/고무 복합재료의 압저항과 니켈입자의 영향
Evaluation of the Effect of Nickel Powder on the Piezoresistivity Behavior of Carbon-Fiber/Rubber Composites
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 탄소 단섬유를 천연고무 기지에 혼합한 탄소섬유/고무 시편과 그에 니켈입자를 추가한 탄소섬유-니켈입자/고무 시편의 초기 전기전도도를 측정하고, 그 시편에 압축스트레인을 가하면서 변화하는 전기전도도를 측정하였다. 실험을 통해 탄소섬유의 체적분율 및 추가된 니켈입자, 외부스트레인 등이 전기전도도에 미치는 영향을 관찰하였다. 탄소섬유 체적분율은 작은 차이로도 시편의 전기전도도의 변화에 매우 큰 역할을 하였고, 외부스트레인에 따른 탄소섬유 재배열에 의해 압저항이 증가하는 것을 알 수 있었다. 또한, 니켈입자의 추가는 탄소섬유가 임계체적분율 이상인 시편에서 전기전도도를 개선하는데 기여하는 것을 볼 수 있었는데, 이로부터 외부변형에 따른 탄소섬유의 재배열에 의해 압저항이 증가하는 현상을 상쇄하는 효과가 있음을 확인하였다
Abstract
In this study, we measure the initial electrical conductivity of SCF/rubber specimens and SCF/rubber specimens with nickel particles respectively. The corresponding electrical conductivity with compressive strain on the specimens is also measured. Through this experiment, we observed the effects of the volume fraction of carbon fiber, nickel particles and external strain on the electrical conductivity. Experiments show that even a small difference in the volume fraction of SCF plays a major role in the change of the electrical conductivity and that the piezoresistivity increases due to fiber reorientation respond to external strain. In addition, the nickel particles contribute to improving the electrical conductivity in specimens with carbon fibers above the threshold volume fraction. It was confirmed that there is an effect of offsetting the increment in the piezoresistivity caused by the reorientation of carbon fibers according to external strain.
참고문헌 (17)
- Kirkpatrick, S., "Percolation and Conduction", Reviews of Modern Physics, 45(4), pp.574~588 (1973)
- Taya, M., "Micromechanics Modeling of Electronic Composites", Journal of Engineering Materials and Technology, 117(4), pp.462~469 (1995)
- Ram, R., "Determination of Percolation Threshold and Electrical Conductivity of Polyvinylidene Fluoride(PVDF)", Short Carbon Fiber(SCF)Composites : Effect of SCF Aspect Ratio, 2017, pp.66(4), 573~582
- Yi, J. Y., "Percolation Behavior of Conductor-Insulator Composites with Varying Aspece Ratio of Conductive Fiber", Journal of Electroceramics, 3, pp.361~369 (1999)
- Balberg, I., "Tunneling and Nonuniversal Conductivity in Composite Materials", Physical Review Letters, 59, pp.1305~1308 (1987)
- Taya, M., "Micromechanics Modeling of Smart Composites", Composites Part A : Applied Science and Manufacturing, 30, pp.531~536 (1999)
- Taya, M., "Piezoresistivity of a Short Fiber", elastomer Matrix Composite, 1998, pp.28, 53~59
- Sun, Y., "Modeling of the Electrical Percolation of Mixed Carbon Fillers in Polymer-Based Composites", Macromolecules, 42(1), pp.459~463 (2009)
- Chen, Y., "Theoretical Estimation on the Percolation Threshold for Polymer Matrix Composites with Hybrid Fillers", Composite Structures, 124, pp.292~299 (2015)
- Haghgoo, M., "Prediction of Electrical Conductivity of Carbon Fiber-carbon Nanotube-reinforced Polymer Hybrid Composites", Composites Part B : Engineering, 167, pp.728~735 (2019)
- 정준호, "고무 복합재료의 압저항 효과", 엘라스토머 및 콤포지트, 48(1), pp.76~84 (2013), 한국고무학회
- Kim, S.Y, "Characteristics Study for Shape Design of Carbon Nanotube Composites Sensor", The Korean Society of Mechanical Engineers, 2018 Spring and Autumn Conference, pp.851~852 (2018)
- 박영빈, "Smart Structural Health Monitoring Using Carbon Nanotube Polymer Composites", Composites Research, 22(6), pp.1~6 (2009), 한국복합재료학회
- Taya, M., "Prediction of In-plane Electrical Conductivity of a Misoriented Short Fiber Composite", Journal of Engineering Materials and Technology, 109(3), pp.252~256 (1987)
- Wang, S. F., "Continuum Space Simulation and Experimental Characterization of Electrical Percolation Behavior of Particulate Composites", Composites Science and Technology, 46(2), pp.93~103 (1993)
- Marsden, A. J., "Electrical Percolation in Graphene-polymer Composites", 2D Materials, 5(3) (2018)
- Zhang, W., "Carbon Based Conductive Polymer Composites", Journal of Materials Science, 42, pp.3408~3418 (2007)