PEM 연료전지용 가스확산층-탄소 복합재료 분리판 조합체 개발
Development of GDL-carbon Composite Bipolar Plate Assemblies for PEMFC
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
PEM(양성자 교환막) 연료 전지는 부산물로 물 만을 생성하여 친환경 에너지원으로 각광받고 있다. 이러한 연료전지의 스택을 이루는 여러 부품들 중 연료전지의 효율을 결정짓는 분리판에 관한 연구가 활발히 진행되고 있다. 복합재료 분리판은 높은 강도와 강성 및 내식성을 갖지만 상대적으로 낮은 전기 전도도를 갖는 단점이 있다. 본 연구에서는 이러한 단점을 극복하고자 가스확산층(GDL)-복합재료 분리판 조합체를 개발하고 그 성능을 실험적으로 확인하였다. 선행 연구에서 개발된 흑연 포일 코팅법을 분리판과 GDL 간의 접촉 저항을 줄이기 위해 적용하였다. 또한, 스택 내의 전자 이동경로를 향상시키고 GDL과 분리판 사이의 접촉저항을 최소화하기 위하여 금속 박막을 이용하여 GDL-분리판 조합체를 제작하였다. 실험 결과 개발된 GDL-분리판 조합체는 기존의 복합재료 분리판과 비교하여 98% 낮은 전기저항을 갖는 것을 확인하였다.
Abstract
PEM (proton exchange membrane) fuel cells generate only water as a by-product, and thus are in the spotlight as an eco-friendly energy source. Among the various components composing the stack of the fuel cell, research on the bipolar plate that determines the efficiency of the fuel cell is being actively conducted. The composite bipolar plate has high strength, rigidity and corrosion resistance, but has the disadvantage of having a relatively low electrical conductivity. In this study, to overcome these shortcomings, a gas diffusion layer (GDL)-composite bipolar plate assembly was developed and its performance was experimentally verified. The graphite foil coating method developed in the previous study was applied to reduce the contact resistance between the bipolar plate and the GDL. In addition, in order to improve electron path in the stack and minimize the contact resistance between the GDL and the bipolar plate, a GDL-bipolar plate assembly was fabricated using a thin metal foil. As a result of the experiment, it was confirmed that the developed GDL-bipolar plate assembly had 98% lower electrical resistance compared to the conventional composite bipolar plate.
참고문헌 (20)
- Appleby, A.J, "Fuel Cells: Trends in Research and Application" (1987), Hemisphere Publishing Corp,
- Linden, D., "Handbook of Batteries and Fuel Cells" (1984), McGraw-Hill
- Cho, E. A., "Characteristics of Composite Bipolar Plates for Polymer Electrolyte Membrane Fuel Cells", Journal of Power Sources, 125(2), pp.178~182 (2004)
- Kim, B. G., "A Single-type Aluminum", composite Hybrid Bipolar Plate with Surface Modification for High Efficiency PEMFC, 2011, pp.36(4), 3087~3095
- Wang, Y., "A Review of Polymer Electrolyte Membrane Fuel Cells : Technology, Applications, and Needs on Fundamental Research", Applied Energy, 88(4), pp.981~1007 (2011)
- Barbir, F., "PEM Fuel Cells: Theory and Practice" (2005), Elsevier Academic Press
- Theodore, M. B., "Carbon", carbon Composite Bipolar Plate for Proton Exchange Membrane Fuel Cells, 2000, pp.147(11), 4083~4086
- Pozio, A., "Bipolar Plate Materials for PEMFCs : A Conductivity and Stability Study", Journal of Power Sources, 179(2), pp.631~639 (2008)
- Chunhui, S., "Performance of an Aluminate Cement", graphite Conductive Composite Bipolar Plate, 2006, pp.159(2), 1078~1083
- Blunk, R., "Polymeric Composite Bipolar Plates for Vehicle Applications", Journal of Power Sources, 156(2), pp.151~157 (2006)
- Chung, C. Y., "Carbon Film-coated 304 Stainless Steel as PEMFC Bipolar Plate", Journal of Power Sources, 176(1), pp.276~281 (2008)
- Lim, J. W., "Development of Composite-metal Hybrid Bipolar Plates for PEM Fuel Cells", International Journal of Hydrogen Energy, 37(17), pp.12504~12512 (2012)
- Kakati, B. K., "Electrochemical and Mechanical Behavior of Carbon Composite Bipolar Plate for Fuel Cell", International Journal of Hydrogen Energy, 35(9), pp.4185~4194 (2010)
- Yu, H. N., "A Graphitecoated Carbon Fiber Epoxy Composite Bipolar Plate for Polymer Electrolyte Membrane Fuel Cell", Journal of Power Sources, 196(23), pp.9868~9875 (2011)
- Yu, H. N., "Plasma Treatment of the Carbon Fiber Bipolar Plate for PEM Fuel Cell", Composite Structures, 94(5), pp.1911~1918 (2012)
- Davies, D. P., "Stainless Steel as a Bipolar Plate Material for Solid Polymer Fuel Cells", Journal of Power Sources, 86, pp.237~242 (2000)
- 임준우, "고온 양성자 교환막 연료전지용 열가소성 탄소 복합재료 분리판 개발", Composites Research, 29(5), pp.243~248 (2016), 한국복합재료학회
- 임준우, "양성자 교환막 연료전지용 탄소 복합재료 분리판 개발", Composites Research, 32(5), pp.222~228 (2019), 한국복합재료학회[DOI]
- 임준우, "바나듐 레독스 흐름 전지용 복합재료 분리판 개발", Composites Research, 34(3), pp.148~154 (2021), 한국복합재료학회[DOI]
- Sedra, A. S., "Microelectronic Circuits" (1998), Oxford University Press